Italy
Germany
Netherlands
Ireland
Portugal
Norway
Spain
KEMPPI remote control foot pedal FR41
Reference: FR41
KEMPPI remote control foot pedal FR41
4,197.26 kr
3 357,81 kr tax excl.
Supplier stock
Dispatched within 5 to 7 days
KEMPPI remote control foot pedal FR41
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
Trafimet
Reference: TE0003
2 Diffusers for type 9-20 and 25 torch
(9 reviews)
22.99 kr
18,39 kr tax excl.
Fast delivery
2-year warranty
This diffuser is suitable for TIG torches with the following duty cycles:
DC: 110 A @35 %
AC: 95 A @ 35 %
Available in several diameters from 1 to 3.2 mm.
Length 21 mm.
Available for order
Kemppi
Reference: GAINE-SP
KEMPPI - Wire guide liner for steel or stainless steel for EURO MINARMIG adapter
92.70 kr
74,16 kr tax excl.
Fast delivery
2-year warranty
Wire guide liners for steel or stainless steel wire from Ø 0.6 to 1 mm depending on the chosen reference
These liners are designed to be used with the EURO adapter for MINARMIG 170 OR 200 welding machines (reference W008366)
Available for order
Trafimet
Reference: ERGOPLUS-15P
MIG-MAG Torch 150 A Trafimet Ergoplus 15 Premium
(8 reviews)
558.23 kr
446,59 kr tax excl.
or 4 x 139,56 kr
Free delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 15 Premium
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural grip handle,
- new plastic spring flexible support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable utilization rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Air-cooled.
Duty cycle: 150 A @ 60%
For use with Ø 0.6 to 0.9 mm welding wire
Accepts M6 threaded contact tips
Originally equipped with a liner for 0.6 / 0.9 mm wire, and a 0.8 mm contact tip.
Available for order
Soudexpert
Reference: ET-150-10R
Tungsten Thorium 2% Electrodes (Red) - Ø1.0x150 mm (x10)
144.09 kr
115,27 kr tax excl.
Free delivery
2-year warranty
Box of 10 Red Tungsten WT20 Electrodes - THORIATED 2%
Electrode diameter: Ø 1.0 mm
For welding steels and stainless steel
Exceptional performance in TIG DC welding
Ideal for precision work
Operating range from 5 to 30 Amperes
Max operating power: DC 50 Amperes
Caution, there is a slight radioactivity risk due to thorium. Therefore we recommend treating grinding dust with a grinder fitted with a particulate filter.
Finally, remember to resharpen when the tip becomes blunt.
Supplier stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Acier
4 steel wire drive rolls for Lincoln I-POWERTEC Standard or Advanced welder
(3 reviews)
840.99 kr
672,79 kr tax excl.
or 4 x 210,25 kr
Free delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid steel or stainless steel wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
Supplier stock
Gys
Reference: 044678
TIG torch SR17/18/26 consumable kit
(12 reviews)
232.86 kr
186,29 kr tax excl.
or 3 x 77,62 kr
Free delivery
2-year warranty
This kit includes:
- 2 nozzles (N5 and N7)
- 2 collet body and nozzle holders (Ø1.6 + Ø2/2.4)
- 2 collets (Ø1.6+Ø2.4)
- 2 back caps (1 short + 1 long)
- 2 universal tungsten electrodes WR2 AC/DC (Ø1.6 + Ø2.4) for welding steel, stainless steel and aluminium.
It is particularly useful for the Gys machines listed below and all those fitted with a torch reference SR 17 -18 and 26
TIG 160 DC
TIG 168 DC HF
TIG 200 DC HF FV
Available for order
GEKA
Reference: super 299
GEKA - SUPER 299 | Rutile electrodes for welding dissimilar steel or stainless
(5 reviews)
367.51 kr
294,01 kr tax excl.
or 4 x 91,88 kr
Free delivery
2-year warranty
Rutile-basic electrode depositing an austenitic-ferritic steel.
Specially suited for welding dissimilar steels (steel, stainless with non-alloy steel), and materials known to be difficult to weld such as tool steels, manganese steels, cast steels, spring steels, gears, cylinder rods...
The deposited metal is particularly resistant to cracking and is also suitable as an underlay before hard facing and for facing cutting or shearing tools.
Smooth fusion, attractive bead appearance - self-releasing slag.
Electrode baking: 250°C / 2 h if necessary.
Inter-pass temperature: max 250°C
Standard AWS A 5.4 / E312-16
Standard ISO 3581-A / E29 9 R 12
Available in 1 or 5 kg cases and two diameters: 2.5 and 3.2 mm
For Ø 2.5: the 1 kg case contains 68 electrodes and the 5 kg case: 370
For Ø 3.2: the 1 kg case contains 30 electrodes and the 5 kg case: 150
Available for order
SILICONI
Reference: SUPER CLEANER
SILICONI | SUPER CLEANER - Detergent for oil, grease, dirt and sludge
74.01 kr
59,21 kr tax excl.
Fast delivery
2-year warranty
SUPER CLEANER is a fast and powerful cleaner for removing: oils, greases, stains, dirt, and sludge. It is suitable for cleaning engines, gears, chains, hard surfaces, chrome parts, plastics, steel, bicycles, aluminium painted parts, chains, and gearboxes. It does not damage rubber, plastic, or carbon frames. Free from petroleum solvents. It contains additives that leave a shiny, protective film on treated surfaces. It does not corrode or scratch treated materials. BIODEGRADABLE.
Thanks to its formula, it can penetrate and dissolve all types of dirt or encrustation.
750 ml spray bottle
It cleans without leaving greasy residues.
Suitable for cleaning: industrial machines, workbenches, engines, chrome frames, chains, chrome parts, external engine parts, nozzles, mechanical movements, plates, iron parts, copper, engine parts, car rims.
SUPER CLEANER reduces the adhesion of dirt on treated surfaces.
✓ Non-flammable
✓ Non-toxic
✓ Ammonia-free
✓ Non-abrasive
INSTRUCTIONS FOR USE
Wet the parts to be cleaned with water, then apply SUPER CLEANER onto them.
Wait a few minutes for the product to act and dissolve the dirt.
Then remove the dirt with a cloth.
Repeat the operation if the dirt is difficult to remove.
It can also be diluted with water to clean delicate surfaces or fabrics.
CHARACTERISTICS
Base: Mixture of detergents and degreasers
Appearance: Transparent amber liquid
Odour: Fragranced
pH: Alkaline
Viscosity: Fluid
Biodegradability: Over 80%
Available for order
GEKA
Reference: ELOX R316L
GEKA | ELOX - Stainless Steel Electrodes 316L - 1 kg case
(10 reviews)
279.21 kr
223,37 kr tax excl.
or 3 x 93,07 kr
Free delivery
2-year warranty
Rutile electrodes for welding unstabilised austenitic stainless steels of type 18/8/3.
Supplied in a plastic case.
Standard AWS A 5.4 - E 316-16
Standard ISO 3581-A - E 19 12 3 L R 12
The Ø 2 mm electrode pack contains 0.7 kg, i.e. 104 pieces. Length 250 mm
The Ø 2.5 mm electrode pack contains 1 kg, i.e. 64 pieces. Length 300 mm
The Ø 3.2 mm electrode pack contains 1 kg, i.e. 27 pieces. Length 300 mm
Available for order
Trafimet
Reference: TE0088
2 Diffusers for type 9-20 and 25 torch for JUMBO nozzle
(1 review)
135.87 kr
108,69 kr tax excl.
Free delivery
2-year warranty
This diffuser is suitable for TIG torches with the following duty cycles:
DC: 110 A @ 35 %
AC: 95 A @ 35 %
Available in several diameters from 1.6 to 3.2 mm.
Available for order
Soudexpert
Reference: ET-150-10G
Tungsten Cerium 2% Electrodes (Grey) - Ø1.0x150 mm (x10)
147.92 kr
118,34 kr tax excl.
Free delivery
2-year warranty
Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 1.0 mm
Very good performance in DC welding
Suitable for thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys
Use at high amperages is not recommended as Cerium oxides will escape, thus cancelling their benefits.
Save 10%
Available for order
Telwin
Reference: 722078
swan neck for TW 160 and TW 180 Telwin torch
(4 reviews)
76.36 kr
84.85 kr
61,09 kr tax excl.
Fast delivery
2-year warranty
Gooseneck for MIG-MAG torch reference TW 160 or TW 180 fitted on Telwin brand welders models
Bimax 120- 140- 152 Bimax 4.165 Turbo - Bimax 162 Turbo
Maxima 160 - Maxima 190
Telmig 170/1 - Telmig 180/2
DECA
Reference: 011252
Drive roller aluminium wire for DECA MIGA 215-218-220 welding machine
(5 reviews)
91.11 kr
72,89 kr tax excl.
Fast delivery
2-year warranty
Reversible drive roller for aluminium wire Ø 0.8 / 1 mm for the DECA welding machines listed below:
MIGA 215 - MIGA 218 - MIGA 220
This drive roller should also be used with the MIGA 220 welding machine when welding with aluminium wire Ø 1.2 mm.
Supplier stock
Telwin
Reference: 802017
TELWIN - Remote control foot pedal for MMA or TIG machine
(1 review)
2,149.20 kr
1 719,36 kr tax excl.
or 4 x 537,30 kr
Free delivery
2-year warranty
Indispensable when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 10 m cable.
Supplier stock
Trafimet
Reference: MA4202-030-ALU
Trafimet - MIG Torch 250 A Ergoplus 25 Premium Aluminium
(2 reviews)
895.47 kr
716,38 kr tax excl.
or 4 x 223,87 kr
Free delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 25 Premium
The MIG ERGOPLUS torch series has been redesigned, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible spring plastic support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m fitted with a liner and a contact tip for aluminium wire Ø 1 mm
Euro connector
Air cooling.
Duty cycle: 220 A @ 60%
Available for order
Trafimet
Reference: ME00
TRAFIMET - 5 gas diffusers for ERGOPLUS 25 torch
(2 reviews)
89.52 kr
71,62 kr tax excl.
Fast delivery
2-year warranty
Two references of contact tip holder/gas diffuser are available depending on the thread of your ERGOPLUS 25 and ERGOPLUS 25 Premium torch
Reference ME0016 if you have an M6 thread on the swan neck of your torch
Reference ME0040 if you have an M8 thread on the swan neck of your torch
KEMPPI remote control foot pedal FR41