Italy
Germany
Netherlands
Croatia
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Helps unscrew the contact tip or gas nozzle from the torch.
Suitable for gas nozzles Ø 12 to 15 mm.
Reference: ORIGINAL FIX
Special MIG MAG multi-purpose pliers Original Fix
225.85 kr
180,68 kr tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Helps unscrew the contact tip or gas nozzle from the torch.
Suitable for gas nozzles Ø 12 to 15 mm.
Customer reviews
Product reviews
-
Perfect very good product
-
Practical
-
Very good and very good quality
-
Practical
-
Very good
-
Matches the command
-
ok good product
-
Perfect
-
Super practical
-
good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
HELVI
Reference: 23005007
(7 reviews)
68.12 kr
54,50 kr tax excl.
Fast delivery
2-year warranty
This nozzle fits on the end of your MIG torch
Its role is to direct the gas flow toward the weld and the melting wire.
This nozzle has an internal thread fitting the torches of HELVI Fox 160 and Panther 132 welding machines
In stock
Telwin
Reference: 742402
(1 review)
770.91 kr
616,73 kr tax excl.
or 4 x 192,73 kr
Free delivery
2-year warranty
Telwin TW 160 replacement MIG-MAG torch, length 2 m, for the welding machine references listed below
BIMAX 132 - 140 - BIMAX 152 - BIMAX 4.165 Turbo - BIMAX 162 Turbo
TECHNOMIG 150 DUAL SYNERGIC
MAXIMA 160
In stock
Sacit
Reference: GAMMA
(22 reviews)
102.51 kr
82,01 kr tax excl.
Fast delivery
2-year warranty
Die-cast brass earth clamp
Copper strip shunt for optimum conductivity
Cable secured with malleable copper lamella and copper-plated steel cable clamp
GAMMA 0 For cable cross-section 16 - 25 mm²
150 A @ 60% and 200 A @ 35%
Opening: 45 mm
GAMMA 1 For cable cross-section 25 - 35 mm²
200 A @ 60% and 250 A @ 35%
Opening: 55 mm
GAMMA 2 For cable cross-section 50-70 mm²
400 A @ 60% and 500 A @ 35%
Opening: 65 mm
Supplier stock
Gys
Reference: 041486
3,309.50 kr
2 647,60 kr tax excl.
or 4 x 827,38 kr
Free delivery
2-year warranty
Spool-Gun torch for Ø 100 mm wire spool, length 4 M.
Equipped with a Ø 0.8 mm contact tip M6 thread.
Duty cycle 150 A @ 60%
Compatible with Gys welding machines:
M1 and T1 Gys auto - T1 Gys auto DV - M3 and T3 Gys auto - T3 Gys auto DV - AUTOPULSE 320-T3
In stock
StrongHandTools
Reference: MSA
(12 reviews)
638.50 kr
510,80 kr tax excl.
or 4 x 159,63 kr
Free delivery
2-year warranty
Quick and easy for holding parts
Ideal for holding round and square tubes as well as sheet metal plates
2 sizes are available and 3 models:
MSA46-HD: pulling force 40 kg - Dimensions 111 x 95 x 29 mm - Angles 45 and 90°
MSA48-HD: pulling force 75 kg - Dimensions 152 x 130 x 35 mm - Angles 45 and 90°
MSA53-HD: pulling force 65 kg - Dimensions 152 x 130 x 35 mm - Angles 45 - 60 and 90°
In stock
Trafimet
Reference: MC0025
123.81 kr
99,05 kr tax excl.
Free delivery
2-year warranty
This spot welding nozzle fits on the end of your MIG torch and guides you in your spot welding work by allowing you to see your weld point, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.
Suitable for Lincoln torches models LGS and LGP 250
Length: 68 mm
Diameter: 18 mm
In stock
Lincoln Electric
Reference: 2GAL-Acier
369.10 kr
295,28 kr tax excl.
or 4 x 92,28 kr
Free delivery
2-year warranty
The drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL WELDING/OTAI
Futura 2005
Futura 2505
for welding wire:
Steel or stainless steel Ø 0.8 / 1 mm
Steel or stainless steel Ø 0.6 / 0.8 mm
In stock
Le Lorrain
Reference: 510135
(32 reviews)
26.44 kr
21,16 kr tax excl.
Fast delivery
2-year warranty
Welding hose for neutral gas: Argon and Argon mixed with Co²
Material: rubber + knitted reinforcement
Resistance: 20 Bar
Inner diameter 6.3 mm
This hose meets the EN559 standard
There is no expiry date on this type of gas hose; its replacement depends on its condition
Sold per linear metre
Maximum length 40 m
Save 10%
Supplier stock
Reference: GC223GMIM3C
2,141.43 kr
2,379.36 kr
1 713,14 kr tax excl.
or 4 x 535,36 kr
Free delivery
2-year warranty
kemppi minarcmig evo 200 torch length 3M
DECA
Reference: 010841
(35 reviews)
98.89 kr
79,12 kr tax excl.
Fast delivery
2-year warranty
This kit includes
1 roller for use with steel or stainless steel wire Ø 0.6 - 0.8 and 1 mm
1 roller for use with flux-cored wire Ø 0.8 - 0.9 and 1.2 mm
1 roller for use with aluminium wire Ø 0.8 and 1 mm
Supplier stock
DECA
Reference: DECA-GAL-MIGA
(13 reviews)
91.11 kr
72,89 kr tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA units:
MIGA 215 - MIGA 218 - MIGA 220
for welding wire:
Steel Ø 0.6 / flux-cored wire Ø 0.6 to 1.2* mm
Steel or stainless steel Ø 0.8 / 1** mm
* Flux-cored wire Ø 1.2 mm is possible with the MIGA 220 and MIGA 225XL units
For MIGA 215 and 218 models, flux-cored wire up to Ø 0.9 mm only.
** solid wire Ø1 mm steel or stainless steel is possible from the MIGA 220 unit
In stock
Telwin
Reference: 722305
(2 reviews)
132.04 kr
105,63 kr tax excl.
Free delivery
2-year warranty
Swan neck for MIG-MAG torch reference MT 15 found on Telwin brand welding machines, models
Technomig 180 Euro - Technomig 210 and 215
Electromig 220 - Mastermig 220/2
Supplier stock
Magswitch
Reference: W000373781
(3 reviews)
713.26 kr
570,61 kr tax excl.
or 4 x 178,32 kr
Free delivery
2-year warranty
Switchable magnetic earth clamp 300 Amperes
Duty cycle 300 A @ 60%
Ideal for welding parts with a large flat or curved surface
Please purchase the lug reference F11533
Maximum cable cross-section: 35-50 mm²
In stock
Gys
Reference: GYS+GAL1D-FLUX
(7 reviews)
136.24 kr
108,99 kr tax excl.
Free delivery
2-year warranty
Reversible roller for:
Solid wire Ø0.8 / flux-cored wire 0.9
Flux-cored wire Ø 0.6 / 0.9 mm
Suitable for GYS machines:
Easymig 110 - 130 and 140
Smartmig 110
suitable for DECA machines:
Miga 215 - Miga 218 and Miga 220.
suitable for SCHUMACHER machines:
M 120 NG
D 144WG
In stock
Trafimet
Reference: GM05
(7 reviews)
46.35 kr
37,08 kr tax excl.
Fast delivery
2-year warranty
Steel or stainless steel wire guide liner:
3 liner diameters available:
Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm for wire Ø 0.6 to 0.9 mm.
Inner diameter 2 mm and outer Ø of the liner 4.6 mm for wire Ø 1 and 1.2 mm.
Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm for wire Ø 1.2 and 1.6 mm.
Length 3 m
In stock
Trafimet
Reference: MD0064-00
95.87 kr
76,70 kr tax excl.
Fast delivery
2-year warranty
5 contact tip holders (M8 thread) for ERGOPLUS 36 and ERGOPLUS 36 Premium torches
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Helps unscrew the contact tip or gas nozzle from the torch.
Suitable for gas nozzles Ø 12 to 15 mm.