GYS - MULTIWELD 320T welder with accessories

The POWERTEC® Lincoln i are new compact inverter-type power sources designed for MIG-MAG & MMA welding. They are available in two power outputs (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large color screen, 25 pre-programmed synergic programs and numerous welding aids for the user. 

The model shown below is the Powertec 250A Advanced 

Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding defects...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' color screen
USB connectivity: Simplified software updates and diagnostics thanks to built-in monitoring functions.

This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and thickness to weld V Display of useful information V Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready to use thanks to the best settings already included
USB CONNECTIVITY Simplified software updates and diagnostics thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimized wire feeder position: stable arc, no vibration in the torch
4 drive rollers: smooth and consistent wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instantaneous and repeatable arc starting at will, immediate stabilization of the welding arc.
STABILITY Exceptional arc stabilization ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.

READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require a gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits. 

Supplied with
Ground clamp and cable length 3 m.
Gas hose length 2 m
Reversible roller for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m

Using digital technology, the NEOPULSE 220 C XL is a single-phase pulsed MIG/MAG generator. A synonym for ultra-performance and high technology, it features numerous synergic curves and exceptional arc dynamics. Its intuitive and highly functional digital interface allows welding parameters to be adjusted with ease. Equipped with a precise 4-roller wire feeding system, the NEOPULSE 220 C XL offers industrial users maximum productivity.

MULTI-PROCESS WELDING
MIG/MAG :
- steel and stainless steel wire: Ø 0.6 to 1.0 mm
- aluminium wire: Ø 0.8 to 1.2 mm
- CuSi and CuAl wire: Ø 0.8 to 1.0 mm
MMA DC / Pulsed:
basic, rutile and cellulosic electrodes (up to Ø 5 mm).
TIG DC: Pulsed.

SYNERGIC Mode: After entering 2 data inputs (material/gas combination and wire diameter), the NEOPULSE automatically determines the optimal welding conditions and allows settings to be adjusted (wire feed speed, voltage, current, arc length).

PRECISE Wire feeder motor speed calibration to adjust the displayed voltage measurement and refine energy calculation. Energy display and post-weld energy calculation in accordance with standards EN1011-1, ISO/TR 18491 and QW-409. Portability: load/save user JOBS and machine configuration from a USB key. Traceability: trace/record all welding steps, bead by bead, during industrial manufacturing in accordance with standard EN ISO 3834.

OPTIMISED MIG/MAG SETTINGS
Welding processes: Manual, Standard, Pulsed, Arc Module (hot/cold current variation). Tack welding modes: SPOT and DELAY. Trigger management: 2T and 4T. Precise welding cycle control: CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler, Post-gas, etc.

MAXIMUM PRODUCTIVITY
4 microprocessors multiply calculation speed tenfold and optimise generator efficiency. High productivity thanks to its high duty cycle (150 A @ 60%). Compatible wire reels: Ø 200 / 300 mm. Powerful 4-roller wire feeder for efficient wire feeding. Very high arc voltage ensuring easy arc striking and exceptional arc dynamics.

ERGONOMIC
New simplified interface centred on welders' navigation habits. Full machine and synergy update via USB key. Storage of 500 welding programs (backup possible on USB key). Current/voltage display during and after welding (WPS/PQR). Choice of main parameter to display on screen (wire speed, average welding current, etc.). Internal lighting of the wire feeder and reel. Viewing window on access panel to check filler wire consumption. Intelligent ventilation management to reduce power consumption, dust intake and machine noise. Compatible with Push-Pull torch (24 V)

ROBUST AND MOBILE
Reinforced casing & anti-slip feet. IP23S enclosure. 2 handles for easy transport.

Upon delivery, this machine is fitted with reversible rollers for steel or stainless steel wire Ø 0.8 / 1 mm.

D200 reel support supplied with this machine.

MIG-MAG torch and earth clamp available as options.

The Technomig 260 Dual Synergic is a welding machine (MIG-MAG / FLUX / BRAZING / MMA / TIG-Lift) of 250A.
It is easy to use thanks to One Touch technology.
With its versatility, Technomig 260 Dual Synergic allows operation on different thicknesses and various welded and braze-welded materials, making it the ideal tool for many fields of application, from maintenance to heavy steelwork and bodywork.

It is possible to manually adjust the arc length to modify the shape of the weld bead according to the operator's style and preferences

One Touch
Setting up the Technomig 260 Dual Synergic is simple and immediate: just program the material thickness and start welding. The 25 synergic curves provided for different gases and materials allow quality welds on steel, stainless steel, aluminium and galvanized sheet metal without wasting time on machine adjustments.

ATC
This process allows welding of thin thicknesses with great ease, reducing material distortion
Arc stability even at low currents.
Fast and precise spot welding
facilitates edge-to-edge sheet metal welding

Delivered with:
1 MIG-MAG torch 250 A length 3 m
1 reversible roller for steel/stainless wire Ø 0.6/0.8 mm
1 gas hose length 1 m
1 earth clamp + cable length 3 m

For connecting the machine to gas, it is recommended to use fitting 804208.

Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminium
MIG duty cycle: 200A at 60% / 180A at 100%
MMA duty cycle: 200A at 60% / 180A at 100%
Current range: 40 to 250A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.9 to 1.2 mm and aluminium 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable MAG torch 250A (2T/4T) 3m (8mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 10kVA generator
Gas cylinder holder for cylinders up to 4m3
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79x 47 cm - 48kg
IP21 rating

Delivered with:
1 x 250 A MB25 torch 3m
1 x 200 Amp earth clamp 4m
1x User manual
2x 0.8/1 mm drive rolls

This BesterMIG 200-S Multi multi-process machine allows MMA - MIG-MAG - TIG welding
Its digital display makes it easy to read the setting information
It accepts wire spools of diameter 100 and 200 mm.
Its low weight makes it an easy ally when transporting on site. It can also be powered by a generator.

No longer worry about choosing the welding current, wire speed or material thickness. The Synergic system does it for you while guaranteeing perfect welds.
The Synergic system limits the risk of weld defects and ensures excellent quality at reduced costs.
Weld with complete peace of mind: automatic parameter adjustment saves welding time and increases your productivity
Easy polarity change for welding with flux-cored wire (gasless).

It features the following functions:
Arc-Force
Hot-Start
Anti-Stick

It is supplied with:
1 MIG-MAG torch length 3 m equipped with a contact tip for steel or stainless steel wire Ø 0.8 mm.
1 Earth clamp + Cable cross-section 16 mm² length 3 m
1 Electrode holder + cable length 3 m
1 Power supply cable length 3 m
1 Reversible drive roll for steel or stainless steel wire Ø 0.8 / 1 mm fitted on the machine
1 Reversible drive roll for steel or stainless steel wire Ø 0.6 / 8 mm
1 Shielding gas hose for refillable cylinder length 2 m 

The generators in the POWERTEC® i COMPACTS RANGE are designed on the latest Lincoln Electric inverter platform for optimal MIG-MAG and MMA welding performance with excellent energy efficiency. The range includes generators delivering 250A, 320A, 380A and 450A, equipped with either a STANDARD screen (i250 & i320 models) or an ADVANCED screen (i250, i320, i380 & i450 models), to best meet customer needs depending on their welding applications. The COOLARC® 26 cooling unit is available in Plug & Play version for the POWERTEC® i380C & i450C ADVANCED.

The model presented below is the Powertec I380 ADVANCED, with a high duty cycle: 320A@60% - 240A@100%, available in two versions
Air-cooled torch
Water-cooled torch

Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding faults...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' colour screen
USB connectivity: Software updates and diagnostics made easier with built-in monitoring functions.

This unit features
INNOVATIVE INTUITIVE INTERFACE
Easy navigation even when wearing welding gloves.
Intuitive adjustment by selecting the process and the thickness to weld
Display of useful information
Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready for use with the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier with built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rollers: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC START Instant and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during changes in welding conditions.

READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new tolerated limits. 

Supplied with for both versions:

Ground clamp and cable length 3 m.
1 Lincgun PROMIG 300 or 330w torch depending on the unit chosen (water or air-cooled torch)
Gas hose length 2 m
Reversible roller for steel/stainless wire Ø 1 and 1.2 mm
Power cable length 5 m

As a supplement for the unit with water-cooled torch

Coolarc 26 cooling unit
Freezcool coolant – 9.6 L container

Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 150A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 130A at 100%
TIG duty cycle: 150A at 60% / 130A at 100%
Current range: 20 to 250A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6 to 1.2 mm and aluminium Ø 0.9 to 1.2 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift TIG ignition
- MMA (basic and rutile electrode up to 5 mm)
4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable EURO 250A 3m STEEL MIG torch (1.2 mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 75 x 45 x 80 cm - 45 kg
IP23S rating for outdoor use

Supplied with:
1 x 250 A 3m MB25 torch
1 x 3m earth clamp
2x 0.8-1.0 rollers

Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminum
MIG duty cycle: 400A at 60% / 240A at 100%
MMA duty cycle: 400A at 60% / 240A at 100%
Amperage range: 40 to 400A
Combines 3 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 6 mm) +
4 drive rolls for Ø 200 mm spool (5 kg) or Ø 300 mm (15 kg)
Removable MAG torch 250A (2T/4T) 3 m (8 mm contact tip)
Digital interface with very intuitive adjustment
Compatible with 10 kVA generator
Gas cylinder support for cylinders up to 4 m³
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79 x 47 cm - 48 kg
IP21 rating

Supplied with:
1x MIG 36 torch - 4 meters
1x 400A ground clamp - 4 meters (35/50 mm connector)
1x User manual
2x drive rolls 1.0/1.2 mm

This tri-technology unit allows you, with a single machine, to weld in MMA, semi-automatic (MIG-MAG) and TIG modes.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic unit features 17 programmed settings. The user simply needs to select the type of metal and the wire diameter. It is also possible to weld in manual mode by directly adjusting the settings parameters.

This welding unit uses wire on a spool. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheets (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this unit enables welding on aluminium, stainless steel and steels in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable wire of the CU Si3 type, it enables welding of HSS, EHS, UHS steels (automotive bodywork)

MIG welding with gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.

Special case: For steel, it is possible to weld without gas when using flux-cored wire (which allows, for example, easier outdoor use). In this case, the thickness of the steel sheets must not be less than 1 mm to avoid the risk of burn-through.

This unit uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). An adapter for Ø 100 mm spools is available as an option. 

Upon delivery, this unit includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless steel wire Ø 0.6 and 0.8 mm.
1 steel/stainless steel contact tip Ø 0.8 mm
1 gas hose for refillable cylinder

TIG welding with gas shielding requires the use of pure Argon gas for welding steels, stainless steels, ferrous alloys and copper...

As an option:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes from Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch 4 m in length in order to weld in TIG mode using pure Argon shielding gas.

For connecting the unit to gas, it is recommended to use the 804208 fitting.

Ideal for craftsmen or home users
Welds steel, stainless steel and aluminum occasionally
Duty cycle: 120A@20% - 40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Antisticking function
2-roller wire feed for spool Ø 100 mm (1 kg)
Fixed MAG torch 120A, 2.20m
Very intuitive interface and settings
Very lightweight, easily portable
Single-phase power supply 230 V - 16 A
Dimensions: 34 x 16 x 31 cm - 7.2 kg

Delivered with:
- 1 ground clamp (cable 1.6 m / 16 mm2)
- 1 electrode holder (cable 1.6 m / 16 mm2)
- 1 accessories bag (Contact tip 0.9mm, Gas nozzle, Tightening wrench, Gas hose 1m, clamps)

This WELD 810 transport trolley by GYS can accommodate:
The welding machine
Gas cylinders up to 4m³
Remote control accessories
Dimensions: Height 81 cm - Length 70 cm - Width 50 cm
Dimensions of the upper shelf: 35 x 55 cm
Trolley sold bare

The Lincoln POWERTEC® i units are new compact inverter-type welding machines for MIG-MAG & MMA welding. They are available in two power ratings (250A and 320A) and with two versions of the human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user. 

The model shown below is the Powertec 320 A Advanced display

Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding defects...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' color screen
USB connectivity: Simplified software updates and diagnostics thanks to included monitoring functions.

This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and thickness to weld V Display of useful information V Multilingual navigation menu
MORE FEATURES
AUTO START-UP The machine is immediately ready for use thanks to the best settings already included
USB CONNECTIVITY Simplified software updates and diagnostics thanks to included monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and steady wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instantaneous and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.

READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits. 

Ground clamp and cable length 3 m.

Gas hose length 2 m
Reversible drive roll for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m

Generator on wheels Welds steel, stainless steel and aluminium MIG duty cycle: 115A at 60% / 90A at 100% MMA duty cycle: 104A at 60% / 80A at 100% Amperage range: 30 to 200A Combines 3 welding processes in 1 product: - MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and Alu 0.8 to 1mm) - MIG/MAG without gas (flux-cored wire Ø 0.9 mm) - MMA (basic and rutile electrode up to 4 mm) with Anti-stick function 4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool Removable 250A MAG torch (2T/4T) 3m (8mm contact tip) Digital interface and very intuitive adjustment Compatible with 9kva generator Bottle support for gas cylinder up to 4m3 Single-phase 230 V - 16 A power supply Dimensions: 77 x 79x 47 cm - 32kg IP23 rating for outdoor use Accepts long extension cables (100m)

Delivered with: 1x 250A 3m torch - (MB25) 1x 2m 16mm² ground clamp 1x 2m 16mm² electrode holder 1x 1m20 gas hose

The Lincoln POWERTEC® i units are new compact inverter-type welding machines designed for MIG-MAG & MMA welding. They are available in two power outputs (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user. 

The model shown below is the Powertec 250A standard display. 

Manual adjustment of voltage and wire feed speed
Quick button for selection of welding process and shielding gas

Quick access to the most frequently used welding parameters (inductance, 2/4 stroke, Run-in, Burn-back)

This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and the thickness to be welded V Display of useful information V Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready for use thanks to the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and consistent wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instant and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.

READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits. 

Supplied with
Earth clamp and cable length 3 m.
Gas hose length 2 m
Reversible drive roll for steel/stainless wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m