Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Two kits are available depending on the cross-section of the electrical cable
In both cases:
OMEGA 4 brass earth clamp + cable of the chosen cross-section, 4 m in length.
Duty cycle 400 A@60% and 500 A 35%
TX 50 connector
Reference: KIT-255
OMEGA 4 brass earth clamp + cable length 4 m - connector 13 mm²
€74.57
60,63 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Two kits are available depending on the cross-section of the electrical cable
In both cases:
OMEGA 4 brass earth clamp + cable of the chosen cross-section, 4 m in length.
Duty cycle 400 A@60% and 500 A 35%
TX 50 connector
Customer reviews
Product reviews
-
Very good
-
RAS
-
compatible with my IMS PRO TIG 200 DC TIG machine
-
Good product
-
I think it must be good
-
Very good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
GEKA
Reference: ELOX R316L
(10 reviews)
€36.75
29,88 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for welding unstabilised austenitic stainless steels of type 18/8/3.
Supplied in a plastic case.
Standard AWS A 5.4 - E 316-16
Standard ISO 3581-A - E 19 12 3 L R 12
The Ø 2 mm electrode pack contains 0.7 kg, i.e. 104 pieces. Length 250 mm
The Ø 2.5 mm electrode pack contains 1 kg, i.e. 64 pieces. Length 300 mm
The Ø 3.2 mm electrode pack contains 1 kg, i.e. 27 pieces. Length 300 mm
In stock
Sacit
Reference: URANIA
(1 review)
€33.46
27,20 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder
Die-cast brass body
Insulating coating in non-flammable, heat-resistant thermosetting materials
Electrode clamping in 5 positions
URANIA 5 For cable cross-section 35 - 50 mm²
250 A @ 60% and 300 A @ 35% - For electrodes from 3.2 to 5 mm
URANIA 6 For cable cross-section 50-70 mm²
300 A @ 60% and 400 A @ 35% - For electrodes from 4 to 6.3 mm
Save 10%
In stock
Trafimet
Reference: lot 010341
(32 reviews)
€11.45
€12.72
9,31 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
Klingspor
Reference: 358370
(6 reviews)
€9.74
7,92 € tax excl.
Fast delivery
2-year warranty
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm
In stock
Weldline
Reference: W000260682
€217.30
176,67 € tax excl.
or 3 x 72,43 €
Free delivery
2-year warranty
This Lincoln kit includes:
1 Electrode holder 400 Amperes @35% Segura 600 + cable 50 mm² length 4 m and 35/70 connector
1 Ground clamp 400 Amperes @35% Hippo 600 + cable 50 mm² length 4 m and 35/70 connector
In stock
Soudure pro
Reference: VIP
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
This carrying case allows you to store your welding machine.
Its dimensions:
Length: 44 cm - Width 33 cm - Height 18.6 cm
It is lined with foam to provide additional protection for your welding machine
In stock
Sacit
Reference: KIT-514
(23 reviews)
€46.01
37,41 € tax excl.
Fast delivery
2-year warranty
Extra-flexible 16 mm² cable, easy to handle and durable
Cable duty cycle: 230 A at 60% - 180 A at 100%
High-performance electrode holder: supports 200 A at 35% and 150 A at 60%
TSK 25 connector (9 mm male connector)
Compatible with electrodes up to 3.2 mm in diameter
Robust die-cast brass structure
Simple and quick one-handed stub ejection
Product delivered assembled, ready to use
This electrode holder kit is available in lengths of 3 (KIT-565) or 5 meters (KIT-567)
Supplier stock
Telwin
Reference: 802666
€255.23
207,50 € tax excl.
or 3 x 85,08 €
Free delivery
2-year warranty
This kit includes: 802666 / T04050 / T04058. It is compatible with the Superior 400 welding machine models from TELWIN.
Save 20%
In stock
Sacit
Reference: F11808S
(35 reviews)
€6.86
€8.57
5,58 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Supplier stock
SOUDO METAL
Reference: 110.00
(7 reviews)
€23.47
19,08 € tax excl.
Fast delivery
2-year warranty
Screw-lock electrode holder 250 Amperes
Duty cycle 250A @ 35% - 200A @ 60%
Compatible with rutile, basic or cellulosic electrodes Ø 1.6 to 4 mm
Maximum cable cross-section: 35 mm²
Electrode locking by screw
Left-hand thread
Full insulation
Compliant with standard EN-60-974-11
In stock
Sacit
Reference: KIT-251/259
(3 reviews)
€43.76
35,58 € tax excl.
Fast delivery
2-year warranty
NEVADA 3 ground clamp with 25 mm² cable, length 3m (KIT-251) or 4m (KIT-259)
Duty cycle 200 A @60% - 250A @ 35%
Dinse TX 50 connector
H01N2-D-HAR rubber electrical wiring
Electrogalvanized steel sheet clamp with brass contacts bridged by a copper braid. Cable secured with a copper strip and steel cable clamp
Maximum opening 45 mm.
Supplier stock
Jelt
Reference: Jelt-58
(18 reviews)
€12.56
10,21 € tax excl.
Fast delivery
2-year warranty
3 products are available for 3 different results after application:
Galva Flash
The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance
Matt Galva
The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.
Gloss Galva
The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.
In stock
Sacit
Reference: GAMMA
(22 reviews)
€13.49
10,97 € tax excl.
Fast delivery
2-year warranty
Die-cast brass earth clamp
Copper strip shunt for optimum conductivity
Cable secured with malleable copper lamella and copper-plated steel cable clamp
GAMMA 0 For cable cross-section 16 - 25 mm²
150 A @ 60% and 200 A @ 35%
Opening: 45 mm
GAMMA 1 For cable cross-section 25 - 35 mm²
200 A @ 60% and 250 A @ 35%
Opening: 55 mm
GAMMA 2 For cable cross-section 50-70 mm²
400 A @ 60% and 500 A @ 35%
Opening: 65 mm
GEKA
Reference: LOTUS
(13 reviews)
€30.55
24,83 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for welding steels
Supplied in cardboard case
AWS Standard A 5.1 - E 6013
ISO Standard 2560-A - E 42 0 RC11
The Ø 2.5 mm electrode pack contains 5 kg, i.e. 270 pieces. Length 350 mm
The Ø 3.2 mm electrode pack contains 5 kg, i.e. 170 pieces. Length 350 mm
The Ø 4 mm electrode pack contains 5 kg, i.e. 115 pieces. Length 350 mm
The Ø 5 mm electrode pack contains 5 kg, i.e. 70 pieces. Length 350 mm
In stock
Weldas
Reference: 44-7110
(1 review)
€7.38
6,00 € tax excl.
Fast delivery
2-year warranty
Split leather electrode holder
Capacity 2.3 kg
In stock
A.T.I
Reference: 16501
€4.10
3,33 € tax excl.
Fast delivery
2-year warranty
Wooden-handled welding brush with 3 rows of steel wire for brushing the weld bead.
Total brush length including handle 290 mm
Handle length 135 mm
Wire length 25 mm
Two kits are available depending on the cross-section of the electrical cable
In both cases:
OMEGA 4 brass earth clamp + cable of the chosen cross-section, 4 m in length.
Duty cycle 400 A@60% and 500 A 35%
TX 50 connector