Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
200 Ampere ground clamp + 35 mm² cable 5 m length Lincoln
Reference: GRD-200A-35-5M
Ground clamp 200 A + 35 mm² cable 5 M 13 mm connector
974.18 kr
974,18 kr tax excl.
Supplier stock
Dispatched within 5 to 7 days
200 Ampere ground clamp + 35 mm² cable 5 m length Lincoln
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Sacit
Reference: KIT-251/259
(3 reviews)
388.71 kr
388,71 kr tax excl.
or 4 x 97,18 kr
Free delivery
2-year warranty
NEVADA 3 ground clamp with 25 mm² cable, length 3m (KIT-251) or 4m (KIT-259)
Duty cycle 200 A @60% - 250A @ 35%
Dinse TX 50 connector
H01N2-D-HAR rubber electrical wiring
Electrogalvanized steel sheet clamp with brass contacts bridged by a copper braid. Cable secured with a copper strip and steel cable clamp
Maximum opening 45 mm.
In stock
HELVI
Reference: 33805104
(2 reviews)
117.88 kr
117,88 kr tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag welder for aluminum welding wire Ø 0.8 and 0.1 mm.
Also compatible with the following Helvi welder models:
Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195
Supplier stock
Sacit
Reference: DELTA 6
(1 review)
243.52 kr
243,52 kr tax excl.
or 3 x 81,17 kr
Free delivery
2-year warranty
Screw-on earth clamp 600 Amperes
Duty cycle 600 A @ 35% and 500 A @ 60%
Special rubber handle with metal core
Ideal for fixed machines and high amperage use
Maximum cable cross-section: 70-95 mm²
In stock
Kemppi
Reference: 9591079
155.68 kr
155,68 kr tax excl.
or 3 x 51,89 kr
Free delivery
2-year warranty
5 insulating rings compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model found on the MINARMIG 170 AND 200 EVO welding machines sold on our website.
In stock
Kemppi
Reference: MG000601
(1 review)
719.19 kr
719,19 kr tax excl.
or 4 x 179,80 kr
Free delivery
2-year warranty
This kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 insulating rings
2 gas nozzles
In stock
StrongHandTools
Reference: MS2
(2 reviews)
1,138.05 kr
1 138,05 kr tax excl.
or 4 x 284,51 kr
Free delivery
2-year warranty
The quick and easy way to hold round or flat workpieces
Two on/off switches for independent operation
2 sizes are available:
MS2-80: pulling force 55 kg - Dimensions 152 x 152 x 38 mm.
MS2-90: pulling force 120 kg - Dimensions 197 x 197 x 48 mm
In stock
Kemppi
Reference: 9580173
(1 review)
68.28 kr
68,28 kr tax excl.
Fast delivery
2-year warranty
1 gas diffuser compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.
In stock
Le Lorrain
Reference: 054200
(16 reviews)
1,447.56 kr
1 447,56 kr tax excl.
or 4 x 361,89 kr
Free delivery
2-year warranty
The DDI regulator is a new generation regulator for rechargeable gas cylinders — compact, extremely sturdy and easy to use
This regulator is designed for use with neutral welding gases such as pure Argon or Argon + CO²
It offers many advantages:
It corrects overpressure issues related to the use of gas welding equipment
It is very easy to use: the recommended welding pressures are pre-set
The pre-set working pressure allows for gas savings
The high-pressure gauge is protected by a PA casing
Type C connection thread
Made in France
In stock
Telwin
Reference: 722167 TELW-GAL2-ALU
(1 review)
358.67 kr
358,67 kr tax excl.
or 4 x 89,67 kr
Free delivery
2-year warranty
2 double-groove rollers for Telwin welding machine for aluminum wires, available for wire diameters: 0.8 / 1 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 240 - 260
ELECTROMIG 281/2 Turbo -300 SYN. - 230 - 330 WAVE -400 - 450 SYNERGIC - 300 Synergic - 430 WAVE - 550 SYNERGIC -
MASTERMIG 270/2 - 300 - 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK -630 MIG PACK -
INVERSEPULSE 60.30 - 60.40
In stock
ESAB
Reference: 0349312497
213.58 kr
213,58 kr tax excl.
or 3 x 71,19 kr
Free delivery
2-year warranty
1 feed roller for flux-cored wire (gasless) with diameter 0.9 to 1.2 mm, compatible with the ESAB welder references listed below.
ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c
In stock
A.T.I
Reference: 16500
(32 reviews)
35.94 kr
35,94 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Total brush length including handle 245 mm
Useful length 135 mm
Supplier stock
Kemppi
Reference: 958010101
(2 reviews)
177.53 kr
177,53 kr tax excl.
or 3 x 59,18 kr
Free delivery
2-year warranty
2 gas nozzles diameter 14 mm - Length 60.5 mm.
Compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO machines sold on our website.
In stock
GEKA
Reference: FIL-INOX309L-200/5
1,666.06 kr
1 666,06 kr tax excl.
or 4 x 416,52 kr
Free delivery
2-year warranty
309L Si stainless steel wire spool Ø 200 mm. Weight 5 kg
Standard AWS A5.9 ER 309LSi
ISO 14343-A G 23 12 LSi
Wire section available: 0.8 and 1 mm
The spool diameter is Ø 200 mm
309L is often used in applications where stainless steels need to be welded to carbon steels or mild steels, as it offers good compatibility with both types of metals while maintaining good corrosion resistance and good mechanical strength.
The main characteristics of 309L TIG include:
- Good corrosion resistance: Thanks to its chromium and nickel content, 309L offers excellent corrosion resistance, even at high temperatures.
- High service temperature: It can be used at high temperatures, making it ideal for high-temperature applications.
- Low carbon content: The low carbon content reduces susceptibility to intergranular corrosion after welding.
This type of material is often used in industrial applications such as heat exchangers, industrial furnaces, chemical and petrochemical equipment, as well as in shipbuilding and marine applications.
In stock
SOUDO METAL
Reference: F11805S
(21 reviews)
68.17 kr
68,17 kr tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 295 grams
Steel handle with a total length of 27 cm.
In stock
Telwin
Reference: 990703
(16 reviews)
162.78 kr
162,78 kr tax excl.
or 3 x 54,26 kr
Free delivery
2-year warranty
This accessory allows the use of wire spools with a diameter of 100 mm (flux-cored, stainless steel or aluminum wire) on Telwin welding machine models when not supplied upon purchase.
This is particularly the case for the welding machine: Technomig 215 Dual Synergic.
In stock
GEKA
Reference: FIL-200.CORTEN
(26 reviews)
544.94 kr
544,94 kr tax excl.
or 4 x 136,24 kr
Free delivery
2-year warranty
CORTEN steel wire coil type 80 SG Ø 200 mm Weight 5 Kg
Standard AW A5.28 - ER 80S-G
Standard ISO 16834-A - G ZMn3Ni1 Cu
Wire section available: 0.8, 1 and 1.2 mm
The use of this welding wire requires the supply of gas (Argon + CO² mixture) during use.
200 Ampere ground clamp + 35 mm² cable 5 m length Lincoln