Italy
Germany
Netherlands
Denmark
Ireland
Portugal
Spain
This adapter allows you to convert your MINARC MIG unit to accept a EURO connector torch.
It must be used with the appropriate wire liner guides references SP008856 or SP008878
Reference: W008366
KEMPPI - EURO MINARC MIG Adapter
1,708.61 kr
1 708,61 kr tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
This adapter allows you to convert your MINARC MIG unit to accept a EURO connector torch.
It must be used with the appropriate wire liner guides references SP008856 or SP008878
Characteristics of KEMPPI - EURO MINARC MIG Adapter
| Cooling type | Air |
Accessories for KEMPPI - EURO MINARC MIG Adapter
714.14 kr
KEMPPI - Accessories kit for MINARMIG welding machine
Reference: MG000601
607.50 kr
KEMPPI - Wire liner for aluminium wire
Reference: 4307660
234.11 kr
KEMPPI - 10 standard contact tips M6 thread
Reference: CTC1S
176.28 kr
KEMPPI - 2 gas nozzles + insulator
Reference: 958010101
67.80 kr
KEMPPI - 1 gas diffuser
Reference: 9580173
154.59 kr
KEMPPI - 5 insulating rings
Reference: 9591079
352.57 kr
KEMPPI - Drive rolls for Minargmig welder
Reference: W00
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
Sacit
Reference: KIT-516/KIT-566
Electrode holder 250 A + 35 mm² cable - 13 mm connector
(5 reviews)
878.82 kr
878,82 kr tax excl.
or 4 x 219,71 kr
Free delivery
2-year warranty
Perfecta 3 electrode holder 250 Amperes + 35 mm² cable length 4 m (KIT-516) or length 5 m (KIT 566)
Ground clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 50 connector
A.T.I
Reference: 16504
Welding brush stainless steel wire for brushing stainless steel and non-ferrous metals
(17 reviews)
89.90 kr
89,90 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle comprising 30 mm wavy stainless steel wires for brushing the weld bead to remove slag.
This brush allows non-aggressive cleaning of steel, stainless steel, or non-ferrous metals.
Total brush length including handle: 245 mm
Usable length: 135 mm
DECA
Reference: 010673
Drive roller for DECA welder wire
(35 reviews)
40.62 kr
40,62 kr tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
Available for order
Trafimet
Reference: MC0020
1 spot welding nozzle Ø 16 for 150 A torch
(15 reviews)
53.29 kr
53,29 kr tax excl.
Fast delivery
2-year warranty
This spot welding nozzle fits onto the end of your MIG torch and guides you in your spot welding work by allowing you to see your welding spot, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.
It is suitable for any torch brand with a duty cycle of 150A @ 60%
Length 61.5 mm
Diameter: 16 mm
Available for order
Telwin
Reference: 722626
Telwin roller for MIG steel flux-cored wire Ø 0.9- 1.2 mm
(18 reviews)
62.82 kr
62,82 kr tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel flux-cored wire Ø 0.9 - 1.2 mm
Compatible with TELWIN machines:
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 Synergic - 210 - 180 EURO - 210 Dual Synergic - 150 DUAL SYNERGIC - 180 DUAL SYNERGIC -
MAXIMA 160 - 190 - 200 - 230 - 270
TELMIG 281/2 TURBO
Available for order
Trafimet
Reference: MC0018
2 gas nozzles diameter 12 mm Trafimet
(76 reviews)
52.85 kr
52,85 kr tax excl.
Fast delivery
2-year warranty
2 gas nozzles Ø 12 mm
Length 53 mm.
This nozzle fits onto the end of your MIG torch
Its role is to direct the gas flow towards the weld and the molten wire.
Suitable for machines equipped with a 150 A @ 60% torch
Available for order
Trafimet
Reference: MC0527P
2 conical gas nozzles diameter 16 mm - Length 84 mm Trafimet
(1 review)
111.99 kr
111,99 kr tax excl.
Fast delivery
2-year warranty
2 gas nozzles Ø 16mm
Length 84 mm.
This nozzle fits onto the end of your MIG 350 A torch
Its role is to direct the gas flow towards the weld and the molten wire.
Suitable for machines equipped with a 320 A @ 60% torch
Available for order
Le Lorrain
Reference: 150376
Male / Male ISOCOUPLE coupler
(11 reviews)
61.84 kr
61,84 kr tax excl.
Fast delivery
2-year warranty
Male / Male Coupler
Compatible with isocouple quick-release fittings 150380-150382-150-388
Available for order
Le Lorrain
Reference: 150381
Le Lorrain |female coupler/ 12/100 ISOCOUPLE
261.78 kr
261,78 kr tax excl.
or 3 x 87,26 kr
Free delivery
2-year warranty
Female neutral gas nozzle
Compatible with quick isocouple connectors 150376
This nozzle fits onto the outlet of your fixed-position regulator and allows you to couple your gas hose fitted with connector 150376
Supplier stock
Oxyturbo
Reference: OXY215
Flow regulator for disposable neutral gas cylinder (Argon and Argon +CO²)
(257 reviews)
360.13 kr
360,13 kr tax excl.
or 4 x 90,03 kr
Free delivery
2-year warranty
Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder
3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely
Regulators accepting gas hoses with 4 mm inner diameter
Available for order
Le Lorrain
Reference: 054200
DDI Regulator
(16 reviews)
1,435.09 kr
1 435,09 kr tax excl.
or 4 x 358,77 kr
Free delivery
2-year warranty
The DDI regulator is a new generation regulator for rechargeable gas cylinders — compact, extremely sturdy and easy to use
This regulator is designed for use with neutral welding gases such as pure Argon or Argon + CO²
It offers many advantages:
It corrects overpressure issues related to the use of gas welding equipment
It is very easy to use: the recommended welding pressures are pre-set
The pre-set working pressure allows for gas savings
The high-pressure gauge is protected by a PA casing
Type C connection thread
Made in France
Available for order
Trafimet
Reference: GM05
Trafimet wire guide liner for MIG welding torch steel length 3 m
(7 reviews)
53.72 kr
53,72 kr tax excl.
Fast delivery
2-year warranty
Steel or stainless steel wire guide liner:
3 liner diameters available:
Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm for wire Ø 0.6 to 0.9 mm.
Inner diameter 2 mm and outer Ø of the liner 4.6 mm for wire Ø 1 and 1.2 mm.
Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm for wire Ø 1.2 and 1.6 mm.
Length 3 m
Available for order
Gys
Reference: GYS-GAL1A-ACIER
1 Type A drive roll for steel wire MIG welding GYS machine
(23 reviews)
198.53 kr
198,53 kr tax excl.
or 3 x 66,18 kr
Free delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG machine for steel or stainless steel wire, available for diameters:
0.6 / 0.8 mm.
0.8 / 1 mm
Compatible with GYS machines:
Smartmig 142 -152 - 162 - 182 - 183 3P
Easymig 150 - 160 - 160XL
Sparmig 140 - 160
Multipearl 200-2
Multiweld
Available for order
Trafimet
Reference: GM0720
Carbon liner Ø 1 - 1.2 mm Trafimet for MIG torch aluminium welding
279.76 kr
279,76 kr tax excl.
or 3 x 93,25 kr
Free delivery
2-year warranty
Teflon / 20% carbon wire guide liner for aluminium wire Ø 1 - 1.2 mm
Designed for Trafimet Ergoplus 36 and 36 M8 torches
2 lengths available: 3 and 4 m
Available for order
GEKA
Reference: 010830
GEKA |UHSS solid wire Ø 0.8 mm for bodywork welding weight 5 kg
(5 reviews)
713.00 kr
713,00 kr tax excl.
or 4 x 178,25 kr
Free delivery
2-year warranty
UHSS* steel wire.
Wire spool Ø 200 mm. Weight 5 KG - Wire Ø: 0.8 mm
UHSS (Ultra High Strength Steel) wire. UHSS steel is particularly used in bodywork. This material makes it possible to reduce thickness and weight while preserving extreme robustness and collision resistance of components.
Classification of this wire: AWS/ASME SFA-5.28: ER 120 S-G
Standard ISO 16834 W Mn4Ni2.5CrMo
Pure Argon shielding gas
*Ultra High Strength
Available for order
Telwin
Reference: 802582-804109
Multi-purpose special MIG MAG pliers
(51 reviews)
162.03 kr
162,03 kr tax excl.
or 3 x 54,01 kr
Free delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
This adapter allows you to convert your MINARC MIG unit to accept a EURO connector torch.
It must be used with the appropriate wire liner guides references SP008856 or SP008878