Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
200 Ampere ground clamp + 35 mm² cable 5 m length Lincoln
Reference: GRD-200A-35-5M
Ground clamp 200 A + 35 mm² cable 5 M 13 mm connector
€109.68
89,17 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
200 Ampere ground clamp + 35 mm² cable 5 m length Lincoln
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Supplier stock
StrongHandTools
Reference: MST327
2 Magnetic Squares
(23 reviews)
€29.16
23,71 € tax excl.
Fast delivery
2-year warranty
Holds 2 pieces at angles
Practical: positioned on the outside, they leave clear space for tack welding from the inside
Various positioning angles available: 60-90-120°
Dimensions 83 x 95 x 16mm
Available for order
Kemppi
Reference: W00
KEMPPI - Drive rolls for Minargmig welder
(1 review)
€39.98
32,50 € tax excl.
Fast delivery
2-year warranty
These drive rolls are suitable for the Minarmig 170 and 200 EVO welding machines.
2 references depending on your needs
For use with flux-cored wire diameter 0.8 to 1 mm (without gas): W001692
For use with solid steel, stainless steel or aluminum wire diameter 0.6 to 1 mm (without gas): W000749
Available for order
Trafimet
Reference: MD0005-1
10 contact tips for steel-stainless steel wire M8 thread - Length 30mm
(1 review)
€15.28
12,42 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire
3 diameters available: 0.8 - 1 and 1.2 mm
M8 thread. Length 30 mm
For Mig-Mag torch 450A @100%
Lincoln Electric
Reference: 2GAL-Fourré
2 Drive Rolls ring + key for flux-cored wire
€23.06
18,75 € tax excl.
Fast delivery
2-year warranty
The flux-cored wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL WELDING/OTAI
Futura 2005
Futura 2505
for welding wire: Ø 1.2 / 1.6 mm
Supplier stock
Gys
Reference: 041486
Spool Gun Torch 150 A 4M Gys
€435.63
354,17 € tax excl.
or 4 x 108,91 €
Free delivery
2-year warranty
Spool-Gun torch for Ø 100 mm wire spool, length 4 M.
Equipped with a Ø 0.8 mm contact tip M6 thread.
Duty cycle 150 A @ 60%
Compatible with Gys welding machines:
M1 and T1 Gys auto - T1 Gys auto DV - M3 and T3 Gys auto - T3 Gys auto DV - AUTOPULSE 320-T3
Soudure pro
Reference: 010845
CuSi3 wire Ø 0.8 mm for MIG Brazing welding 800g spool
(20 reviews)
€40.90
33,25 € tax excl.
Fast delivery
2-year warranty
CuSi3 solid wire
Wire spool Ø 100 mm - Weight 0.8 KG - Wire Ø: 0.8 mm
Welding wire suitable for HSS steel in MIG Brazing mode on electro-galvanized or galvanized steels or Cu-Si, Cu-Mn alloys.
Wire recommended for joining copper materials and various steel sheets.
Wire particularly used in the automotive industry (HSS steel, better wetting performance)
Wire classification: AWS A5.7: ERCuSi-A EN ISO 24373: S Cu 6560 (CuSi3Mn1) DIN 1733 SG-CuSi3
Shielding gas required during welding: Pure Argon
Available for order
GEKA
Reference: FIL-200
Steel wire spool diameter Ø 200 mm weight 5 kg
(244 reviews)
€25.57
20,79 € tax excl.
Fast delivery
2-year warranty
Steel wire spool Ø 200 mm. Weight 5 kg
Available wire sections: 0.6 - 0.8 - 1
Used for steel construction, machine manufacturing, boats, tanks, pipes, tubes, thin sheet metal, steel furniture, bodywork, frames and reinforcements
The use of this welding wire requires a shielding gas supply (Argon + CO² mixture)
Standard AWS A5.18 ER70S-6
ISO Standard: 14341 -A G 42 3 M G3Si1
Delivered in individual cardboard box.
Supplier stock
Telwin
Reference: 803059
Trolley for MIG or TIG welding machine ARCTIC
(2 reviews)
€333.12
270,83 € tax excl.
or 4 x 83,28 €
Free delivery
2-year warranty
This trolley is the ideal way to move your welding machine.
It is a 2-in-1 trolley: welding machine + gas cylinder on the same support.
Welding machine up to 55 cm in height
Assembled dimensions: 560 X 480 X H 1100 mm
Gas cylinder maximum 4 m3.
The cylinder and the welding machine are secured to the trolley with straps (included).
Trolley sold unequipped.
The price shown does not include the gas cylinder or the welding machine.
Delivered unassembled.
Available for order
Trafimet
Reference: ERGOPLUS-500
MIG-MAG 500 A Ergoplus 500 Torch
(1 review)
€186.55
151,67 € tax excl.
or 3 x 62,18 €
Free delivery
2-year warranty
ERGOPLUS 500 EURO TORCH Water-cooled.
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new double swivel joint,
- removable torch handle (included in all standard torch assemblies),
- cable assembly fitted with a new reduced surface friction, for smooth movement without snagging,
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- new rear housing to prevent crushing of water hoses,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Water cooling - 1.6 L/minute
Duty cycle 450 A @ 100% with mixed gas
For use with welding wire Ø 1 to 2.4 mm
Accepts M8 threaded contact tips
factory-equipped with a liner for steel or stainless steel wire Ø 1.2/1.6 mm and a 1.2 mm contact tip
Available for order
Sacit
Reference: KIT-562/KIT-564
Electrode holder 200 A + 25 mm² cable connector 9 mm
(17 reviews)
€53.74
43,69 € tax excl.
Fast delivery
2-year warranty
Electrode holder PARVA2 200 Amperes + 25 mm² cable length 3 m (KIT-562) or length 4 m (KIT 564)
Earth clamp opening 45 mm
Duty cycle 150 A @60% - 200 A @ 35%
Connector 9 mm
Save 10%
Available for order
Telwin
Reference: 722078
swan neck for TW 160 and TW 180 Telwin torch
(4 reviews)
€10.05
€11.17
8,17 € tax excl.
Fast delivery
2-year warranty
Gooseneck for MIG-MAG torch reference TW 160 or TW 180 fitted on Telwin brand welders models
Bimax 120- 140- 152 Bimax 4.165 Turbo - Bimax 162 Turbo
Maxima 160 - Maxima 190
Telmig 170/1 - Telmig 180/2
Available for order
Trafimet
Reference: 010370 - GM0600
Wire liner for MIG torch aluminium welding for Startwin and Decastar
(6 reviews)
€20.30
16,50 € tax excl.
Fast delivery
2-year warranty
Wire liner for aluminium wire Ø 0.8 mm, 1 mm.
Length 3 m
This liner fits DECA machines: Startwin 135 EVO and 165/1EVO - Startwin 180 E - Decastar 135 EVO - Decastar 150 E and Decastar 180E
Available for order
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Aluminium
4 Aluminum wire rollers for Lincoln I-POWERTEC Standard or Advanced welder
€110.70
90,00 € tax excl.
Fast delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
Available for order
Trafimet
Reference: MD0064-00
TRAFIMET - 5 contact tip holders for ERGOPLUS 36 torch
€12.82
10,42 € tax excl.
Fast delivery
2-year warranty
5 contact tip holders (M8 thread) for ERGOPLUS 36 and ERGOPLUS 36 Premium torches
Available for order
GEKA
Reference: FIL-316-INOX
316 LSi stainless steel wire spool Ø 300 mm
€235.75
191,67 € tax excl.
or 3 x 78,58 €
Free delivery
2-year warranty
316 LSi stainless steel wire spool Ø available in wire diameters of 0.8, 1 and 1.2 mm, spool Ø 300 mm.
Spool weight: from 12.5 to 15 kg depending on the wire diameter.
Wire Ø 0.8 mm = 12.5 kg spool.
Wire Ø 1 and 1.2 mm = 15 kg spool.
The use of this welding wire requires a gas supply during use (Argon + CO² mixture).
This wire enables welding of stainless steel in the food industry, marine or boilermaking sectors.
This wire meets the AWS A5.9ER316LSi standard
ISO standard 14343-A G 19 9 L Si
DECA
Reference: CDC-DECA
Swan neck for Mig DECA torch
(9 reviews)
€14.05
11,42 € tax excl.
Fast delivery
2-year warranty
Swan neck for MIG-MAG DECA torch.
This product is a replacement accessory, it is not required when purchasing a new welder.
The swan neck reference must be selected according to your DECA welder reference:
Swan neck 010240 for DECA welders:
Decastar 130 and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Swan neck 010485 for DECA welders:
Decastar 150 E and 180 E
Decamig 180 E.
D-MIG 350 and 380 if your welder is fitted with a torch without EURO connection fixed to your welder.
Swan neck 010488 for DECA welders:
Decamig 2500
D-MIG 390 and 420S
JOB220 LAB -522-523
D-Mig 520T - 525T - 530S - 520SD -530SD - 525TD
MIGA 218- 220-225XL
Swan neck 010824 for DECA welder
MIGA 215
200 Ampere ground clamp + 35 mm² cable 5 m length Lincoln