Italy
Germany
Netherlands
Ireland
Portugal
Norway
Spain
- -665.33 kr
- Pack
Reference: 816147 + 804416
TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
10,707.19 kr
10,041.86 kr
8 033,49 kr tax excl.
Supplier stock
Dispatched within 5 to 7 days
Instead of 10,855.20 kr
Characteristics of TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
| Supply voltage (in Volts) | 50 / 60 Hz - 230 Volts | Fuse (in Amperes) | 16 A |
| Duty cycle at 40° of the plasma cutter | 35A@30% - 25A@60% - 20A@100 % | Open circuit voltage (in Volts) | 313 |
| Cutting current | 10 - 40 A | Clean cut thickness | 12 mm |
| Cutting thickness in separation | 15 mm for iron - 10 mm for aluminum | Warranty | 2 years |
| Dimensions (in mm) | 470 x 260 x H378 | Weight in kg | 17,3 |
| Protection rating | IP23 | Integrated compressor | Yes |
Documents
Accessories for TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
192.50 kr
10 medium electrodes for plasma cutter
Reference: PR0110
149.51 kr
10 nozzles for plasma cutter
Reference: PD0116
524.97 kr
4 shield nozzles for plasma cutter
Reference: PC01
127.46 kr
2 diffusers for plasma cutter torch
Reference: PE0106
770.92 kr
Compass Kit for Plasma Torch MT25K /35K - TPT40 - Z
Reference: 040205
159.60 kr
Lincoln - 1 cutting guide for plasma cutter torch LC 25 or LC30
Reference: W03X0893-78R
218.01 kr
Cutting guide carriage for plasma torch
Reference: 040199
926.69 kr
Consumable kit for Telwin 54 XT plasma cutter
Reference: 804416
1,129.09 kr
Special impurity filter for plasma cutter
Reference: W88X1456A-LAF1250
1,319.91 kr
Cartridge for special plasma impurity filter
Reference: W8800117RCustomer reviews
Product reviews
-
I bought this model of cutter to replace the same model but 10 years old. Even if it is still just as noisy (compressor), the improvements are notable (more ergonomic and more "serious" torch, removable torch socket, more readable dashboard, look, etc.).
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Save 10%
Available for order
Gys
Reference: 013841
GYS - Plasma Cutter GYS Cutter 70 CT+ torch 6 m MT-70
(1 review)
20,441.95 kr
22,713.28 kr
16 353,79 kr tax excl.
- Complete kit
- Fe 35 mm
- Ai/CrNi 25 mm
Free delivery
2-year warranty
The Gys CUTTER 70 CT plasma cutter has a cutting capacity of 35 mm thickness on steel and 25 mm on aluminium in separation mode.
Suited to industrial environments, it is highly effective on solid sheets, mesh sheets or painted structures.
Cutting speed superior to oxy-fuel.
Cuts all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Optimised machine cooling thanks to the ventilation channel isolating electronic components from dust.
Easy and quick consumable installation for maximum efficiency.
Premium TECMO® torch (leading supplier in Europe).
Superior cut quality: air-cooled torch body providing high arc stability at various operating levels.
Hypertherm®-compatible consumables.
Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required, facilitating transport and maintenance.
Easy-to-use trigger mechanism for greater comfort.
Intuitive control panel: - 3 working modes: solid sheet / perforated sheet / lock -
manual air pressure adjustment (4.1 < 6.5 bar) with front panel bargraph.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Compatible with CNC kit for automated cutting table.
Gouging with maximum removal - Allows significant metal removal (Skid and Nozzle specific options available)
Reinforced casing & anti-slip feet.
Supplied with an MT-70 torch 6 m long and an earth clamp + cable 4 m long - 10 mm² section
This plasma cutter requires connection to a compressed air supply with a flow rate of 185 L/minute.
Save 10%
Available for order
Gys
Reference: 068063
EASYCUT K25
6,622.81 kr
7,358.68 kr
5 298,25 kr tax excl.
- Built-in compressor
- Fe 8 mm
- Al/Crni 6 mm
Free delivery
2-year warranty
The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).
Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).
Supplier stock
Telwin
Reference: 816146+804415
TELWIN | Plasma cutter pack Technology 41XT + consumables box
(2 reviews)
7,358.68 kr
5 886,94 kr tax excl.
Free delivery
2-year warranty
Supplier stock
Telwin
Reference: 816170 +804041
TELWIN - Superior 70 Plasma cutter with manual torch 6 m length
23,314.16 kr
18 651,33 kr tax excl.
Free delivery
2-year warranty
Inverter technology plasma cutter with contact pilot arc ignition.
Enables fast cutting without distortion, cutting through grating, and gouging of all conductive materials, such as steel, stainless steel, galvanized steel, aluminium, copper, or brass for example.
Easy-to-read digital display.
High cutting current stability.
Thermostatic protection against overvoltage and undervoltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20 - 30 mm depending on materials.
Adjustment range from 20 to 70 A
Options:
1) Interface with automated cutting table
2) Remote control
Requires connection to a compressor delivering 200 l/min of air at a pressure of 4 - 5 bar.
Supplied with:
1 Tecmo torch 6 m long fitted with a 70 A nozzle + 1 spare 70 A nozzle.
1 ground clamp + cable 25 mm² cross-section, 5 m long
Save 10%
Available for order
Gys
Reference: 029743
GYS EASYCUT 40 Plasma Cutter
(15 reviews)
6,036.02 kr
6,706.69 kr
4 829,04 kr tax excl.
- Best seller
- Fe 20 mm
- Al/CrNi 15 mm
Free delivery
2-year warranty
Suitable for maintenance and bodywork, the EASYCUT 40 plasma cutter easily cuts all types of metal up to 15 mm thick. With a power output of 40 A, it excels at precision cutting at low amperage.
Inverter technology ensuring quality cutting on all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Easy and quick consumable installation (Trafimet® standard).
Efficient cutting: air-cooled torch body providing high arc stability at various operating levels.
Easy-to-use trigger mechanism for greater comfort. Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required.
Manual air pressure adjustment (2.5 < 6.5 bar) with front panel bargraph.
Automatic torch detection.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Protected against overvoltage and overcurrent
Torch presence or insufficient air pressure indicator.
→ Requires connection to a compressed air supply delivering 100 l/minute at a variable pressure between 2.5 and 6.5 bar depending on the machine setting.
Supplied with a TPT 40 torch 4 m long and a 10 mm² section earth clamp cable 2 m long.
Save 10%
Supplier stock
Gys
Reference: 088962
Plasma Cutter Gys NEOCUT 105 T400 with torch, ground clamp and starter kit
34,994.60 kr
38,882.88 kr
27 995,68 kr tax excl.
- Extra powerful
- Fe 50 mm
- Al/CrNi 40 mm
Free delivery
2-year warranty
Max piercing capacity in mm: 20 (Fe) and 18 (Al).
Max clean cut capacity in mm: 35 (Fe) and 30 (Al).
Max severance capacity in mm: 50 (Fe) and 40 (Al).
Pre-installed CNC connectors (analog and digital).
Automatic air pressure and flow management.
Gouging removal rate: 8kg/h
Air pressure and flow: 5-9 bar / Flow 355 L/Min
Easy to use.
Reliable and robust.
Generator compatible (15kW).
Supplied with MT 70 6m plasma torch, 4m -16mm2 ground clamp.
Three-phase 400V -3ph power supply.
Dimensions: 57.5x30x51.5 cm.
Weight: 31kg.
Supplier stock
Gys
Reference: 014787
GYS Cutter 45 CT Plasma Cutter without torch
(3 reviews)
10,708.31 kr
8 566,90 kr tax excl.
- 3 modes
- Fe 20 mm
- CrNi 15 mm
Free delivery
2-year warranty
The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 25 mm* thickness on a wide range of materials. Designed for use in demanding environments, it features a very robust mechanism and an intuitive control panel.
• Cuts mild steel, stainless steel, hardened steel, HLE steel, aluminium, copper…
• 3 working modes:
- Cutting on solid sheet metal
- Cutting on grid/mesh supports
- Trigger lock
• HF-free ignition, avoiding interference that could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.
Delivered without torch.
MT-70 torches for professional use of your cutter, 6 or 12 m long, available as an option on the site.
* Clean cut is 25 mm, separation cut 30 mm and piercing 12 mm when this cutter is fitted with an MT-70 torch
Ground clamp + cable 2 m long, 10 mm² cross-section, supplied with the unit
Supplier stock
Telwin
Reference: 816147
TELWIN Technology 54 XT | Plasma cutter with integrated compressor
(3 reviews)
9,928.38 kr
7 942,70 kr tax excl.
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables clean cutting of materials up to 12 mm thick or 15 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable change indicator device
This cutter is fitted with a warning indicator light for consumable replacement
Delivered with a 4 m torch + ground clamp and cable 3 m long
Available for order
Telwin
Reference: 816148
Telwin Technology 60 XT plasma cutter
(2 reviews)
10,084.15 kr
8 067,32 kr tax excl.
Free delivery
2-year warranty
This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with a warning indicator light for consumable replacement
Supplied with a 4 m torch + ground clamp and 3 m cable
Supplier stock
ESAB
Reference: 0559170004
ESAB Cutmaster 70+
27,706.01 kr
22 164,81 kr tax excl.
Free delivery
2-year warranty
The Cutmaster 70+ plasma cutter is the ideal combination of power and portability for portable plasma cutting machines. Portable and durable with its three handles and a lightweight, industrial, weather-resistant enclosure. The bright 10.9 cm (4.3-inch) TFT LCD screen with a glove-compatible adjustment knob simplifies use and allows for increased control and flexibility.
Save 10%
Supplier stock
Gys
Reference: 088948
Plasma Cutter Gys NEOCUT 45 Single-phase 230V with torch, ground clamp and starter kit
20,183.80 kr
22,426.45 kr
16 147,04 kr tax excl.
- CNC Ready
- Fe 30 mm
- Al/CrNi 20 mm
Free delivery
2-year warranty
Max piercing capacity in mm: 12 (Fe) and 10 (Al).
Max clean cut capacity in mm: 25 (Fe) and 15 (Al).
Max severance capacity in mm: 30 (Fe) and 20 (Al).
Pre-installed CNC connectors (analog and digital).
Automatic air pressure and flow management.
Easy to use.
Reliable and robust.
Supplied with MT 70 6m plasma torch, ground clamp and starter kit.
Single-phase 230V power supply.
Dimensions: 43x22x38mm.
Weight: 14.3kg.
Supplier stock
Telwin
Reference: 816070
TELWIN - Superior 70 Plasma cutter without accessories
14,932.28 kr
11 945,82 kr tax excl.
Free delivery
2-year warranty
Inverter plasma cutter with contact pilot arc ignition.
Enables fast, distortion-free cutting, cutting on mesh and gouging of all conductive materials, such as steel, stainless steel, galvanised steel, aluminium, copper, or brass for example.
Easy-to-read digital display.
High cutting current stability.
Thermostatic protections for over-voltage and under-voltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20–30 mm depending on materials.
Adjustment range: 20 to 70 A
Options:
1) Interface with automated cutting table
2) Remote control
Requires connection to a compressor delivering 200 l/min of air at a pressure of 4–5 bar.
Supplied with:
Available for order
Gys
Reference: 013858
EASYCUT 30 FV
7,374.66 kr
5 899,73 kr tax excl.
- Flexible Voltage
- Fe 15 mm
- Al/CrNi 10 mm
Free delivery
2-year warranty
The EASYCUT 30 FV is a 30 A plasma cutter capable of cutting steel up to 10 mm (15 mm separation cut). Its HF-free ignition extends consumable life and protects surrounding electronic equipment. Ideal for maintenance and bodywork, it combines robustness with ease of use.
Thanks to inverter technology, it delivers quality cutting on mild steel, stainless steel, hardened steel, HSLA, aluminium and copper. The interface is clear with manual adjustment of current and air pressure via a front-panel flow meter.
The ergonomic 4 m air-cooled torch is designed for safe, stable and shock-resistant use. It is easily disconnectable for easy transport.
Equipped with Flexible Voltage technology (85–265V) and PFC, it adapts to all single-phase voltages and optimises power consumption with up to 30% energy savings. Its reinforced casing, anti-slip feet and compact format make it a reliable and portable tool for all environments.
Available for order
Telwin
Reference: 816146
TELWIN - TECHNOLOGY 41XT - Plasma Cutter
(2 reviews)
6,735.69 kr
5 388,55 kr tax excl.
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass....
It is compact and has a small footprint (420 x 182 x H 292 mm) and weight (7 kg)
This cutter allows a clean cut on materials up to 15 mm thick or 18 mm in separation.
It allows piercing of sheet metal (refer to the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable replacement indicator device c
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with an indicator light signalling the need to replace consumables.
Delivered with a 4 m torch + earth clamp and cable 3 m long
Supplier stock
Gys
Reference: 013636
GYS - Plasma Cutter 70 CT without torch
17,714.99 kr
14 172,24 kr tax excl.
- 4 modes
- Fe 35 mm
- CrNi 25 mm
Free delivery
2-year warranty
The Gys CUTTER 70 CT plasma cutter has a cutting capacity of 35 mm thickness on steel and 25 mm on aluminium in separation.
Suited to industrial environments, it is highly effective on solid sheets, mesh or painted structures.
Cutting speed superior to oxy-fuel.
Cuts all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Optimised unit cooling thanks to the ventilation channel that isolates electronic components from dust.
Easy and fast consumable installation for maximum efficiency.
Premium TECMO® torch (leading supplier in Europe).
Superior cut quality: air-cooled torch body offering excellent arc stability at various operating levels.
Hypertherm®-compatible consumables.
Designed to withstand shocks and heat.
Quick torch connection/disconnection without tools, facilitating transport and maintenance.
Easy-to-use trigger mechanism for greater comfort.
Intuitive control panel: - 3 working modes: solid sheet / perforated sheet / lock -
manual air pressure adjustment (4.1 < 6.5 bar) with front bargraph.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Compatible with CNC kit for automated cutting table.
Gouging with maximum removal - Enables significant metal elimination (Pad and Nozzle specific options available)
Reinforced casing & non-slip feet.
Supplied with: one earth clamp + cable 4 m long - 10 mm² cross-section
This plasma cutter requires connection to a compressed air source with a flow rate of 185 L / minute.
Supplier stock
Gys
Reference: 088955
Plasma Cutter Gys NEOCUT 70 T400 with torch, ground clamp and starter kit
32,238.02 kr
25 790,42 kr tax excl.
- CNC Digital and Analog
- Fe 30 mm
- Al/CrNi 20 mm
Free delivery
2-year warranty
Max piercing capacity in mm: 15 (Fe) and 12 (Al).
Max clean cut capacity in mm: 25 (Fe) and 18 (Al).
Max severance capacity in mm: 35 (Fe) and 25 (Al).
Pre-installed CNC connectors (analog and digital).
Automatic air pressure and flow management.
Gouging removal rate: 4kg/h
Air pressure and flow: 5-9 bar / Flow 355 L/Min
Easy to use.
Reliable and robust.
Generator compatible (15kW).
Supplied with MT 70 6m plasma torch, 4m -10mm2 ground clamp and starter kit.
Three-phase 400V -3ph power supply.
Dimensions: 52.5x26x45.5 cm.
Weight: 22kg.