OXYTURBO - Regulator and Flow Meter OXYTURBO at the Best Prices!

Active filters

By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.

Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.

Active filters

favorite_border favorite
Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)

Available for order

Oxyturbo

Reference: 215310

Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)

(17 reviews)

201.65 kr

161,32 kr tax excl.

or 3 x 67,22 kr

Free delivery

2-year warranty

Flow meter for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O².

The maximum possible setting with this regulator is 6 liters per minute when fully open

M10 thread
Ridged fitting for hose with inner Ø 6.3 to 7.5 mm

We offer two models

  • With one gauge to adjust the flow rate precisely  
  • With two gauges to check the fill level of the cylinder and adjust the flow rate precisely 

 

Regulators accepting gas hoses with an inner diameter of 6.5 to 7.3 mm

 

 

 

Combinations Price quantity
201.65 kr
323.12 kr
favorite_border favorite
Flow meter for MIG-MAG semi-automatic welding torch

Available for order

Oxyturbo

Reference: 260090

Flow meter for MIG-MAG semi-automatic welding torch

(22 reviews)

154.93 kr

123,94 kr tax excl.

or 3 x 51,64 kr

Free delivery

2-year warranty

This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.

favorite_border favorite
Regulator with flowmeter and column for refillable cylinder

Available for order

Oxyturbo

Reference: 245400

Regulator with flowmeter and column for refillable cylinder

(8 reviews)

693.05 kr

554,44 kr tax excl.

or 4 x 173,26 kr

Free delivery

2-year warranty

This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².

They comply with and are designed according to standard EN 585/ISO 2503

Pressure gauge size: Ø 70 mm.

This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar

Type C connection thread

Made in Italy

It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter

 

favorite_border favorite
Mini Dual-Gauge Regulator for refillable cylinder

Available for order

Oxyturbo

Reference: 255200.01

Mini Dual-Gauge Regulator for refillable cylinder

(51 reviews)

385.44 kr

308,36 kr tax excl.

or 4 x 96,36 kr

Free delivery

2-year warranty

This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
They comply with and are designed according to standard EN 585/ISO 2503
Gauge dimensions: Ø 50 mm
This regulator has an adjustable flow rate from 0 to 30 litres / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
The quick isocoupler fittings sold on our website are not compatible with this regulator

 

favorite_border favorite
Flow regulator for disposable neutral gas cylinder (Argon and Argon +CO²)

Supplier stock

Oxyturbo

Reference: OXY215

Flow regulator for disposable neutral gas cylinder (Argon and Argon +CO²)

(257 reviews)

310.69 kr

248,55 kr tax excl.

or 4 x 77,67 kr

Free delivery

2-year warranty

Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder

3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely

Regulators accepting gas hoses with 4 mm inner diameter

 

Combinations Price quantity
147.17 kr
201.65 kr
310.69 kr
Back to top
Array