Italy
Germany
Netherlands
Croatia
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Magnetic holder for MIG torch
Reference: MIMTSM
Magnetic holder for MIG torch
77.47 kr
61,97 kr tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Magnetic holder for MIG torch
Customer reviews
Product reviews
-
Very good
-
Very good quality
-
Perfect!
-
Very good
-
Good product
-
Product ok
-
Hello. Great, as usual. Fast efficient quality. Everything is said. Continue. Cdlt
-
Not yet used
-
?
-
impeccable!
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Sacit
Reference: F11373
(5 reviews)
297.43 kr
237,95 kr tax excl.
or 3 x 99,14 kr
Free delivery
2-year warranty
Rotating magnetic earth clamp 400 Amperes
Duty cycle 300 A @ 60% and 400 A @ 35%
Ideal for welding parts with a large flat surface
Maximum cable cross-section: 16-25 / 35-50 mm²
In stock
Gys
Reference: 041196
(28 reviews)
131.57 kr
105,26 kr tax excl.
Free delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG welding machine for aluminium wire Ø 0.8 and 1 mm.
Compatible with GYS machines:
Easymig 150 - 160 - 160XL
Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Multipearl 200-2
Multiweld
In stock
Trafimet
Reference: GM07
(8 reviews)
229.22 kr
183,37 kr tax excl.
or 3 x 76,41 kr
Free delivery
2-year warranty
Trafimet Teflon wire liner with copper terminal for aluminium wire
2 lengths available: 3 metres and 4 metres
2 liner diameters available:
For aluminium wire Ø 0.6 to 0.9 mm reference GM0710 (blue liner) length 3 metres
For aluminium wire Ø 1 and 1.2 mm reference GM0715 length 3 metres (red liner) and GM0716 length 4 metres
In stock
Sacit
Reference: CAV000081
(5 reviews)
37.84 kr
30,28 kr tax excl.
Fast delivery
2-year warranty
Reversible hammer-brush, combining a hammer and a brush for chipping and brushing slag from the weld bead.
Practical 2-in-1 tool for post-weld cleaning.
Carefully sized handle to keep the user away from the hot zone.
Dimensions:
Total length (brush + handle): 290 mm (brush + handle length)
Handle length: 145 mm
Wire length: 25 mm
In stock
Lincoln Electric
Reference: WP10419
(3 reviews)
127.74 kr
102,19 kr tax excl.
Free delivery
2-year warranty
Aluminium wire guide liner Ø 0.1 mm, 1.2 mm
2 lengths available for 3 or 4 m torch.
This liner fits 250 A torches used with Lincoln Speedtec 200 and 215 C welding machines
In stock
Le Lorrain
Reference: 150376
(11 reviews)
53.36 kr
42,69 kr tax excl.
Fast delivery
2-year warranty
Male / Male Coupler
Compatible with isocouple quick-release fittings 150380-150382-150-388
In stock
Trafimet
Reference: FB0117
(5 reviews)
50.83 kr
40,67 kr tax excl.
Fast delivery
2-year warranty
2 Contact tip holders for ERGOPLUS 15 and ERGOPLUS 15 Premium torch
In stock
Oxyturbo
Reference: OXY215
(257 reviews)
310.70 kr
248,56 kr tax excl.
or 4 x 77,68 kr
Free delivery
2-year warranty
Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder
3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely
Regulators accepting gas hoses with 4 mm inner diameter
In stock
Kemppi
Reference: W00
(1 review)
303.69 kr
242,95 kr tax excl.
or 4 x 75,92 kr
Free delivery
2-year warranty
These drive rolls are suitable for the Minarmig 170 and 200 EVO welding machines.
2 references depending on your needs
For use with flux-cored wire diameter 0.8 to 1 mm (without gas): W001692
For use with solid steel, stainless steel or aluminum wire diameter 0.6 to 1 mm (without gas): W000749
In stock
Telwin
Reference: 722130
(1 review)
186.51 kr
149,21 kr tax excl.
or 3 x 62,17 kr
Free delivery
2-year warranty
Telwin drive roller for flux-cored steel MIG welding wire Ø 0.8 - 0.9 - 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 230 and 243 WAVE -240 - 260
ELECTROMIG 220 Synergic - 230 - 300 SYN. - 330 WAVE
TELMIG 281/2 TURBO
MASTERMIG 220/2 - 270/2 - 300
In stock
StrongHandTools
Reference: MAV120
(1 review)
1,915.23 kr
1 532,18 kr tax excl.
or 4 x 478,81 kr
Free delivery
2-year warranty
Adjustable magnetic square from 30 to 275° Fast and efficient for holding round or flat pieces together. Handle to adjust and lock the desired angle
In stock
A.T.I
Reference: 16508
101.20 kr
80,96 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm
In stock
Gys
Reference: 072343
544.68 kr
435,75 kr tax excl.
or 4 x 136,17 kr
Free delivery
2-year warranty
This kit is compatible with GYS MULTIPEARL 210-4 and MULTIPEARL 214-4 welders
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 2 type B rollers with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
In stock
DECA
Reference: DECA-GAL-JOB220-F
139.04 kr
111,24 kr tax excl.
Free delivery
2-year warranty
The rollers listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for gasless welding wire
Ø 0.8 / 0.9 mm
Ø 0.9 / 1.2 mm
Supplier stock
Telwin
Reference: 803059
(2 reviews)
2,297.13 kr
1 837,71 kr tax excl.
or 4 x 574,28 kr
Free delivery
2-year warranty
This trolley is the ideal way to move your welding machine.
It is a 2-in-1 trolley: welding machine + gas cylinder on the same support.
Welding machine up to 55 cm in height
Assembled dimensions: 560 X 480 X H 1100 mm
Gas cylinder maximum 4 m3.
The cylinder and the welding machine are secured to the trolley with straps (included).
Trolley sold unequipped.
The price shown does not include the gas cylinder or the welding machine.
Delivered unassembled.
In stock
Trafimet
Reference: ME0076
(1 review)
26.35 kr
21,08 kr tax excl.
Fast delivery
2-year warranty
M8 threaded contact tube holder for Ergoplus torch type 400 / 500 / 600 and 601
Magnetic holder for MIG torch