Italy
Germany
Netherlands
Ireland
Portugal
Norway
Spain
This kit includes:
5 contact tips Ø 0.6 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 aluminium
3 contact tip holders 150 A
5 nozzle springs
3 gas nozzles
Reference: 041226
Accessories kit for MIG torch MB 15 150A
381.51 kr
305,21 kr tax excl.
Supplier stock
Dispatched within 5 to 7 days
This kit includes:
5 contact tips Ø 0.6 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 aluminium
3 contact tip holders 150 A
5 nozzle springs
3 gas nozzles
Customer reviews
Product reviews
-
Very happy
-
very good
-
Meets my expectations
-
As expected
-
good quality product, but not yet really tested.
-
Good merchandise delivered quickly
-
same as said, it's perfect for me
-
impeccable in this box there are all the accessories for the perfect 150A soldering torch
-
Product received corresponding to my order
-
Perfect for getting started I recommend other products to fill the box
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
Sacit
Reference: KIT-516/KIT-566
Electrode holder 250 A + 35 mm² cable - 13 mm connector
(5 reviews)
758.20 kr
606,56 kr tax excl.
or 4 x 189,55 kr
Free delivery
2-year warranty
Perfecta 3 electrode holder 250 Amperes + 35 mm² cable length 4 m (KIT-516) or length 5 m (KIT 566)
Ground clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 50 connector
Supplier stock
Trafimet
Reference: MA4202-030-ALU
Trafimet - MIG Torch 250 A Ergoplus 25 Premium Aluminium
(2 reviews)
895.47 kr
716,38 kr tax excl.
or 4 x 223,87 kr
Free delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 25 Premium
The MIG ERGOPLUS torch series has been redesigned, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible spring plastic support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m fitted with a liner and a contact tip for aluminium wire Ø 1 mm
Euro connector
Air cooling.
Duty cycle: 220 A @ 60%
Save 10%
Supplier stock
Reference: GC223GMIM3C
kemppi minarcmig evo 200 torch
2,141.42 kr
2,379.35 kr
1 713,13 kr tax excl.
or 4 x 535,36 kr
Free delivery
2-year warranty
kemppi minarcmig evo 200 torch length 3M
Available for order
Trafimet
Reference: ME0076
2 contact tube holders for 400/500A torch
(1 review)
26.35 kr
21,08 kr tax excl.
Fast delivery
2-year warranty
M8 threaded contact tube holder for Ergoplus torch type 400 / 500 / 600 and 601
Available for order
Soudure pro
Reference: ORIGINAL FIX
Special MIG MAG multi-purpose pliers Original Fix
(11 reviews)
225.85 kr
180,68 kr tax excl.
or 3 x 75,28 kr
Free delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Helps unscrew the contact tip or gas nozzle from the torch.
Suitable for gas nozzles Ø 12 to 15 mm.
Supplier stock
Jelt
Reference: Jelt-58
Jelt cold galvanizing
(18 reviews)
95.41 kr
76,32 kr tax excl.
Fast delivery
2-year warranty
3 products are available for 3 different results after application:
Galva Flash
The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance
Matt Galva
The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.
Gloss Galva
The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.
Lincoln Electric
Reference: 2GAL-Aluminium
2 Ring drive rolls + key for aluminium wire
(1 review)
175.21 kr
140,17 kr tax excl.
or 3 x 58,40 kr
Free delivery
2-year warranty
The aluminium wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL-WELDING (OTAI)
Futura 2005 and 0505C
for welding wire:
Aluminium Ø 0.8 / 1 mm
Aluminium Ø 1.2 / 1.6 mm
Available for order
Sacit
Reference: KIT-512/528
Ground clamp 400 A + 35 mm² cable - 13 mm connector
(9 reviews)
542.44 kr
433,95 kr tax excl.
or 4 x 135,61 kr
Free delivery
2-year warranty
NEVADA 3 ground clamp + 35 mm² cable available in lengths of 3 and 4 m
Duty cycle 300 A @60% - 400 A @ 35%
Dinse TX 50 connector
H01N2-D-HAR rubber electrical wiring
Electrozinc-plated sheet steel clamp with brass contacts bridged by a copper braid. Cable clamped with a copper strip and steel cable clamp
Maximum opening 73 mm.
Available for order
Oxyturbo
Reference: 245400
Regulator with flowmeter and column for refillable cylinder
(8 reviews)
693.07 kr
554,46 kr tax excl.
or 4 x 173,27 kr
Free delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².
They comply with and are designed according to standard EN 585/ISO 2503
Pressure gauge size: Ø 70 mm.
This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter
Available for order
Lincoln Electric
Reference: LINCOLN-GALET
1 Drive roll for Lincoln Speedtec and Powertec welder
(10 reviews)
280.33 kr
224,26 kr tax excl.
or 3 x 93,44 kr
Free delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
Available for order
Trafimet
Reference: MF15
TRAFIMET - Swan neck for Mig Ergoplus Premium torch
85.69 kr
68,55 kr tax excl.
Fast delivery
2-year warranty
Swan neck for MIG-MAG torch Trafimet, Ergoplus
Reference MF1515 is intended for the Ergoplus Premium 15 model
Reference MF0017 is intended for the Ergoplus Premium 25 model
Reference MF0019 is intended for the Ergoplus Premium 36 model
Available for order
Telwin
Reference: 742575
Telwin drive roller for MIG steel wire Ø 0.6 - 0.8 mm
(2 reviews)
97.37 kr
77,89 kr tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2
Available for order
Lincoln Electric
Reference: R-1019-125-1/08R
Adapter for Ø 200 spool Lincoln
(3 reviews)
207.91 kr
166,33 kr tax excl.
or 3 x 69,30 kr
Free delivery
2-year warranty
This adapter allows the use of Ø200 wire spools on welding machines originally designed to accommodate 15 kg spools.
Available for order
Trafimet
Reference: GM07
Teflon Liner for aluminium wire
(8 reviews)
229.22 kr
183,37 kr tax excl.
or 3 x 76,41 kr
Free delivery
2-year warranty
Trafimet Teflon wire liner with copper terminal for aluminium wire
2 lengths available: 3 metres and 4 metres
2 liner diameters available:
For aluminium wire Ø 0.6 to 0.9 mm reference GM0710 (blue liner) length 3 metres
For aluminium wire Ø 1 and 1.2 mm reference GM0715 length 3 metres (red liner) and GM0716 length 4 metres
Available for order
GEKA
Reference: FIL-300-ALU
Aluminium wire AlMg5 spool Ø 300 mm weight 7 kg
(3 reviews)
1,047.32 kr
837,85 kr tax excl.
or 4 x 261,83 kr
Free delivery
2-year warranty
Aluminium wire spool AlMg5 Ø 0.8 - 1 and 1.2 mm. Weight 7 kg
The use of this welding wire requires Argon gas shielding during operation
This wire is suitable for aluminium welding
The spool diameter is 300 mm
The price of the spool depends on the wire diameter chosen.
Available for order
Trafimet
Reference: ME0579
2 nozzles for torch 400/500A
(1 review)
30.74 kr
24,59 kr tax excl.
Fast delivery
2-year warranty
2 white ceramic nozzles Ø 16 mm for Ergoplus torch type 400 / 500 / 600 and 601
This kit includes:
5 contact tips Ø 0.6 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 aluminium
3 contact tip holders 150 A
5 nozzle springs
3 gas nozzles