Italy
Germany
Netherlands
Ireland
Portugal
Norway
Spain
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
Reference: 802582-804109
Multi-purpose special MIG MAG pliers
139.79 kr
111,83 kr tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
Customer reviews
Product reviews
-
You just need to resize the pliers tips to be able to properly clean the nozzle.
-
Not yet used
-
Top
-
Nickel
-
Fast service
-
Tip too big to clean the inside of the nozzle.
-
Perfect
-
Good but nozzle cleaning nozzles a little thick for small nozzles
-
Very good
-
particularly effective product.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
DECA
Reference: DECA-2GAL-JOB522-AL
2 Aluminum wire drive rolls for DECA JOB 522 and 523 LAB
(1 review)
256.97 kr
205,58 kr tax excl.
or 3 x 85,66 kr
Free delivery
2-year warranty
The drive rolls proposed below are compatible with the following DECA multi-process welding machines:
JOB 522 and 523 LAB
for aluminum welding wire
Ø 0.8 / 1 mm
Ø 1 / 1.2 mm
Available for order
Gys
Reference: GYS-GAL2-ALUMINIUM
2 Type B drive rolls for aluminum wire MIG welding GYS welder
(7 reviews)
251.55 kr
201,24 kr tax excl.
or 3 x 83,85 kr
Free delivery
2-year warranty
2 double V-groove 35° drive rolls for GYS welder for solid aluminum wire, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibilities:
• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L
Lincoln Electric
Reference: 2GAL-Aluminium
2 Ring drive rolls + key for aluminium wire
(1 review)
175.21 kr
140,17 kr tax excl.
or 3 x 58,40 kr
Free delivery
2-year warranty
The aluminium wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL-WELDING (OTAI)
Futura 2005 and 0505C
for welding wire:
Aluminium Ø 0.8 / 1 mm
Aluminium Ø 1.2 / 1.6 mm
Available for order
Kemppi
Reference: W00
KEMPPI - Drive rolls for Minargmig welder
(1 review)
303.69 kr
242,95 kr tax excl.
or 4 x 75,92 kr
Free delivery
2-year warranty
These drive rolls are suitable for the Minarmig 170 and 200 EVO welding machines.
2 references depending on your needs
For use with flux-cored wire diameter 0.8 to 1 mm (without gas): W001692
For use with solid steel, stainless steel or aluminum wire diameter 0.6 to 1 mm (without gas): W000749
Available for order
Sacit
Reference: KIT-512/528
Ground clamp 400 A + 35 mm² cable - 13 mm connector
(9 reviews)
542.44 kr
433,95 kr tax excl.
or 4 x 135,61 kr
Free delivery
2-year warranty
NEVADA 3 ground clamp + 35 mm² cable available in lengths of 3 and 4 m
Duty cycle 300 A @60% - 400 A @ 35%
Dinse TX 50 connector
H01N2-D-HAR rubber electrical wiring
Electrozinc-plated sheet steel clamp with brass contacts bridged by a copper braid. Cable clamped with a copper strip and steel cable clamp
Maximum opening 73 mm.
Supplier stock
Trafimet
Reference: GM0501
Trafimet wire guide liner for MIG torch welding steel or stainless steel Length 4 M
(4 reviews)
60.83 kr
48,67 kr tax excl.
Fast delivery
2-year warranty
Wire guide liner for steel or stainless steel wire - Length 4 m
3 liners available to choose according to the diameter of the selected welding wire
For wire Ø 0.6 to 0.9 mm: Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm (GM0501)
For wire Ø 1 and 1.2 mm: Inner diameter 2 mm and outer Ø of the liner 4.6 mm (GM0511)
For wire Ø 1.2 and 1.6 mm: Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm (GM0541)
Available for order
Lincoln Electric
Reference: LINCOLN-GALET
1 Drive roll for Lincoln Speedtec and Powertec welder
(10 reviews)
280.33 kr
224,26 kr tax excl.
or 3 x 93,44 kr
Free delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
Available for order
Gys
Reference: 039483
Type D drive roller for steel or stainless steel wire Ø 0.6 and 0.8 mm square shaft
(6 reviews)
147.55 kr
118,04 kr tax excl.
Free delivery
2-year warranty
Drive roller for GYS MIG-MAG welding machine for steel or stainless steel wire of cross-section 0.6 and 0.8 mm.
Compatible with GYS welding machines:
Easymig: 110 - 130 and 140
Smartmig 110
Sparkmig 110
Neomig 130
Compatible with DECA welding machines:
Miga 215 - Miga 218 and Miga 220.
Available for order
Sacit
Reference: KIT-242/245
Earth clamp 250 A + 16 mm² cable - 9 mm connector
(10 reviews)
236.69 kr
189,35 kr tax excl.
or 3 x 78,90 kr
Free delivery
2-year warranty
Earth clamp 250 Amperes + 16 mm² cable 3 m long (kit-245) or 4 m long (kit-242)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 25 connector
Available for order
SOUDO METAL
Reference: MIMTSM
Magnetic holder for MIG torch
(68 reviews)
77.46 kr
61,97 kr tax excl.
Fast delivery
2-year warranty
Magnetic holder for MIG torch
Available for order
Trafimet
Reference: EA030
5 springs for MIG-MAG torch swan neck
(11 reviews)
74.57 kr
59,65 kr tax excl.
Fast delivery
2-year warranty
5 Springs for MIG-MAG torch swan neck
Depending on the type of your torch (MB15 or MB25), you will need to choose one of the two available references
Available for order
Lincoln Electric
Reference: W10430-15
LINCOLN |Lincoln LGS3-150G MIG-MAG Torch
(1 review)
490.58 kr
392,46 kr tax excl.
or 4 x 122,65 kr
Free delivery
2-year warranty
Lincoln LGS3 torch 150A - EURO connector
Available length: 3 and 4 m
- Ergonomic handle for comfortable welding day after day
- Swivel handle, easy to handle
- Extra flexible cable
Duty cycle 150 A @ 60%
Applications: Thin sheet metal and automotive
For wire Ø 0.6 to 1 mm
Supplied with a contact tip Ø 0.8 mm (M6 thread) and a conical gas nozzle Ø 12 mm.
Available for order
Gys
Reference: 041233
Accessory kit for MIG torch MB 25 250A
(14 reviews)
387.79 kr
310,23 kr tax excl.
or 4 x 96,95 kr
Free delivery
2-year warranty
This kit includes:
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 aluminium
3 contact tip holders 250 A
5 nozzle springs
3 gas nozzles
Available for order
A.T.I
Reference: 16500
Welding Brush with Crimped Steel Wire for Brushing Steel
(32 reviews)
30.74 kr
24,59 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Total brush length including handle 245 mm
Useful length 135 mm
Available for order
GEKA
Reference: FIL-300-ALU
Aluminium wire AlMg5 spool Ø 300 mm weight 7 kg
(3 reviews)
1,047.32 kr
837,85 kr tax excl.
or 4 x 261,83 kr
Free delivery
2-year warranty
Aluminium wire spool AlMg5 Ø 0.8 - 1 and 1.2 mm. Weight 7 kg
The use of this welding wire requires Argon gas shielding during operation
This wire is suitable for aluminium welding
The spool diameter is 300 mm
The price of the spool depends on the wire diameter chosen.
Available for order
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Aluminium
4 Aluminum wire rollers for Lincoln I-POWERTEC Standard or Advanced welder
840.99 kr
672,79 kr tax excl.
or 4 x 210,25 kr
Free delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle