Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- Out of stock
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish
Reference: PXJ4
Set of 4 center punches
€8.15
6,63 € tax excl.
Out of stock
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish
Customer reviews
Product reviews
-
not yet tried unlike the soldering equipment but seems ok
-
Very good
-
Very good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
FISCHER-DAREX
Reference: FD1003
(1 review)
€4.31
3,50 € tax excl.
Fast delivery
2-year warranty
Thickness gauge from 0.05 to 1 mm.
In stock
Weldas
Reference: 44-7110
(1 review)
€7.38
6,00 € tax excl.
Fast delivery
2-year warranty
Split leather electrode holder
Capacity 2.3 kg
In stock
SILICONI
Reference: ZINCOSIL 430
€6.92
5,63 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.
400 ml aerosol
PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.
SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance
In stock
StrongHandTools
Reference: TBH90604
(5 reviews)
€404.88
329,17 € tax excl.
or 4 x 101,22 €
Free delivery
2-year warranty
Worktop dimensions: 900 x 600 mm.
2 possible working heights:
To be placed on your workbench or worktop: leg height 158 mm
Assembly with provided removable legs: working height 860 mm
Worktop thickness: 4 mm
Hole diameter: 16 mm
Weight: 33 kg
Maximum permitted weight: 680 kg
Sold bare
Two kits available (offered as options):
TBKM1-28: Square accessories for welding table
TBKM2-24: Round accessories for welding table
In stock
FISCHER-DAREX
Reference: 1205
(7 reviews)
€8.09
6,58 € tax excl.
Fast delivery
2-year warranty
This kit contains:
1 stainless steel ruler, length 200 mm
1 scriber, length 210 mm
1 center punch 2.5 mm
In stock
StrongHandTools
Reference: TBKM
(4 reviews)
€265.47
215,83 € tax excl.
or 3 x 88,49 €
Free delivery
2-year warranty
Kit contents:
TBKM1-28 (accessories for square profile)
4 magnetic supports
4 positioning stops
4 insertion stops
4 stop bars
4 threaded adapters
TBKM2-24 (accessories for round profile)
4 clamps
8 V-tube supports
4 V-Spacers
4 stop bars
4 threaded adapters
Accessories designed for 4 mm thick tables
In stock
SILICONI
Reference: SUPER CLEANER
€9.74
7,92 € tax excl.
Fast delivery
2-year warranty
SUPER CLEANER is a fast and powerful cleaner for removing: oils, greases, stains, dirt, and sludge. It is suitable for cleaning engines, gears, chains, hard surfaces, chrome parts, plastics, steel, bicycles, aluminium painted parts, chains, and gearboxes. It does not damage rubber, plastic, or carbon frames. Free from petroleum solvents. It contains additives that leave a shiny, protective film on treated surfaces. It does not corrode or scratch treated materials. BIODEGRADABLE.
Thanks to its formula, it can penetrate and dissolve all types of dirt or encrustation.
750 ml spray bottle
It cleans without leaving greasy residues.
Suitable for cleaning: industrial machines, workbenches, engines, chrome frames, chains, chrome parts, external engine parts, nozzles, mechanical movements, plates, iron parts, copper, engine parts, car rims.
SUPER CLEANER reduces the adhesion of dirt on treated surfaces.
✓ Non-flammable
✓ Non-toxic
✓ Ammonia-free
✓ Non-abrasive
INSTRUCTIONS FOR USE
Wet the parts to be cleaned with water, then apply SUPER CLEANER onto them.
Wait a few minutes for the product to act and dissolve the dirt.
Then remove the dirt with a cloth.
Repeat the operation if the dirt is difficult to remove.
It can also be diluted with water to clean delicate surfaces or fabrics.
CHARACTERISTICS
Base: Mixture of detergents and degreasers
Appearance: Transparent amber liquid
Odour: Fragranced
pH: Alkaline
Viscosity: Fluid
Biodegradability: Over 80%
In stock
Urko tools
Reference: 21-A
(4 reviews)
€4.77
3,88 € tax excl.
Fast delivery
2-year warranty
C-clamp for sheet metal.
3 possible clamping sizes.
In stock
SOUDO METAL
Reference: F11805S
(21 reviews)
€7.68
6,24 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 295 grams
Steel handle with a total length of 27 cm.
In stock
Telwin
Reference: 804031
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866
In stock
FISCHER-DAREX
Reference: CPJ5
(1 review)
€7.90
6,42 € tax excl.
Fast delivery
2-year warranty
Knurled body Ø 0.8 mm
Diameter 2-3-4-5-6 mm
In stock
FISCHER-DAREX
Reference: F802
(24 reviews)
€4.05
3,29 € tax excl.
Fast delivery
2-year warranty
Fixed pen-type scriber, all-steel
Pen-type scriber for marking steel.
Length 150 mm. Ø 6 mm.
In stock
FISCHER-DAREX
Reference: réglet
(5 reviews)
€2.98
2,42 € tax excl.
Fast delivery
2-year warranty
2 available ruler lengths: 150 and 300 mm.
In stock
RHODIUS
Reference: LGZ F2
(8 reviews)
€3.83
3,11 € tax excl.
Fast delivery
2-year warranty
Flat zirconia flap discs with fibreglass backing. Diameter 125 mm - Bore 22.23
High performance on stainless steel but also suitable for work on mild steel
Available in 3 grits: 40 - 60 and 80
Long service life and excellent material removal
In stock
SILICONI
Reference: ZINCOSIL 400
€8.97
7,29 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.
500 ml aerosol
PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.
Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free
In stock
StrongHandTools
Reference: T64203
(1 review)
€5.54
4,50 € tax excl.
Fast delivery
2-year warranty
This stop allows workpieces to be held in place for welding. Compatible with any welding table with Ø 16 mm holes
Dimensions:
Diameter 25 mm
Useful stop height: 37 mm
Total height: 52 mm
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish