Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
C-clamp for sheet metal.
3 possible clamping sizes.
Reference: 2510003
C-shaped steel sheet metal clamp
€4.77
3,88 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
C-clamp for sheet metal.
3 possible clamping sizes.
Customer reviews
Product reviews
-
Good quality, to be seen in use.
-
Great, pretty strong magnet, hold on tight.
-
Works very well, well made I recommend
-
This is the wire model of my soldering iron machine. 0.8 mm steel cored wire that I couldn't find in stores.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
SILICONI
Reference: PENTRIX 100
(1 review)
€13.84
11,25 € tax excl.
Fast delivery
2-year warranty
PENTRIX 100 is a red penetrant liquid in aerosol form, formulated to reveal cracks, crazes or porosity caused by welding on ferrous materials and other metals.
Thanks to its intense colour and composition, PENTRIX can penetrate the most complex areas and reveal cracks and crazes caused by welding.
400 ml aerosol
INSTRUCTIONS FOR USE
Shake well before use.
1. Degrease and clean the surface to be treated with METACLEAN aerosol degreaser;
2. Spray PENTRIX 100 on the parts to be inspected;
3. Wait 10 to 70 minutes for the product to fully penetrate.
4. Clean the treated surfaces with water or solvent. Do not spray solvent aerosol directly onto treated surfaces as this could remove all of the red liquid.
CHARACTERISTICS
Base: Mixture of petroleum distillates, dyes and surface tension protectors.
Appearance: Red liquid
Propellant: Denatured hydrocarbon, non-toxic and odourless
CFC-FREE
In stock
Weldline
Reference: CERASKIN
(4 reviews)
€32.80
26,67 € tax excl.
Fast delivery
2-year warranty
Ceramic-based anti-spatter spray with very fast drying that protects welding equipment and wear parts against welding spatter.
Extremely fast drying (a few seconds)
Long-lasting hold and resistance of the protective film
Ceraskin guarantees 8 hours of continuous welding work without needing to reapply the product
Jelt
Reference: Jelt56
(1 review)
€12.56
10,21 € tax excl.
Fast delivery
2-year warranty
3 products for complementary use:
PENETRANT:
Red dye used to highlight small defects that may cause leaks.
DEVELOPER:
White powder product. It is used in conjunction with the PENETRANT and highlights small defects that may cause leaks.
Its white powder draws out by capillary action the red penetrant embedded in the crack from a thickness of 30 microns.
Easy to apply, non-destructive testing.
CLEANER:
Surface cleaner to be used before and after dye penetrant testing.
Penetrates into the smallest cracks and removes excess PENETRANT.
In stock
Weldline
Reference: W000335164
(10 reviews)
€7.07
5,75 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
In stock
SILICONI
Reference: RIVELEX 200
(1 review)
€10.76
8,75 € tax excl.
Fast delivery
2-year warranty
RIVELEX 200 is an aerosol product for detecting cracks or porosity caused by welding in all types of materials. Thanks to its composition, RIVELEX 200 can be applied very quickly, as it contains fast-evaporating solvents that leave a white powder on treated surfaces, enabling crack detection.
It can be used with red and fluorescent penetrants (PENTRIX 100).
400 ml aerosol
INSTRUCTIONS FOR USE
Shake the aerosol for at least one minute before use.
Spray RIVELEX 200 at a distance of approximately 20 to 30 cm onto the part that has been previously treated with a liquid penetrant.
Wait 10 to 20 minutes for the product to be fully effective.
Then inspect the treated materials.
This product causes no damage to treated materials.
The bases used comply with the regulations, ASME 2644 type II; MIL-I-25135 form D type II..
CHARACTERISTICS
Base: Mixture of solvents and white powders
Propellant: Denatured hydrocarbon, odorless
Appearance: White liquid
CFC-FREE
In stock
RHODIUS
Reference: LGZ F2
(8 reviews)
€3.83
3,11 € tax excl.
Fast delivery
2-year warranty
Flat zirconia flap discs with fibreglass backing. Diameter 125 mm - Bore 22.23
High performance on stainless steel but also suitable for work on mild steel
Available in 3 grits: 40 - 60 and 80
Long service life and excellent material removal
In stock
Telwin
Reference: 981863
(2 reviews)
€91.73
74,58 € tax excl.
Fast delivery
2-year warranty
Cleaning brush kit for Cleantech 200 Telwin
This item is used when cleaning with the BRUSH IT cleaner
These brushes are suitable for cleaning small weld beads
In stock
StrongHandTools
Reference: UBN110
(5 reviews)
€19.99
16,25 € tax excl.
Fast delivery
2-year warranty
Accessory designed for tables 4mm thick
In stock
StrongHandTools
Reference: MSA
(12 reviews)
€84.05
68,33 € tax excl.
Fast delivery
2-year warranty
Quick and easy for holding parts
Ideal for holding round and square tubes as well as sheet metal plates
2 sizes are available and 3 models:
MSA46-HD: pulling force 40 kg - Dimensions 111 x 95 x 29 mm - Angles 45 and 90°
MSA48-HD: pulling force 75 kg - Dimensions 152 x 130 x 35 mm - Angles 45 and 90°
MSA53-HD: pulling force 65 kg - Dimensions 152 x 130 x 35 mm - Angles 45 - 60 and 90°
FISCHER-DAREX
Reference: Ecrous
€3.90
3,17 € tax excl.
Fast delivery
2-year warranty
Pack of 40 rivet nuts.
Used as a threaded insert to fix metal to metal: stool tubes, chairs, table legs, balustrades...
For use with the Fischer-Darex pliers reference 792942.
3 thread sizes available
In stock
RHODIUS
Reference: XT77
(14 reviews)
€1.59
1,29 € tax excl.
Fast delivery
2-year warranty
Cut-off disc producing minimal burr, used at high cutting speeds and generating few sparks
Enables cutting of steel
Suitable for cutting rebar, sheet metal and hardened steel
Available in 2 thicknesses: 1 and 1.5 mm - Bore 22.23
These thin discs are particularly useful for cutting solid or thin materials (less than 3 mm)
Their advantages:
Minimal thermal stress
Reduced friction on the workpiece
Reduced blue discolouration
Cut almost burr-free
In stock
Weldline
Reference: PICKLINOX- GEL
(4 reviews)
€25.12
20,42 € tax excl.
Fast delivery
2-year warranty
Removes oxides after stainless steel welding.
Available in 2 kg and 10 kg tubs in gel form
Pickling is the operation that removes all oxides after welding, by removing the surface depleted as a result of heat treatment.
It is the most important step in the treatment process.
It must be taken into account that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not simply mean cleaning the weld beads but primarily consists of restoring the stainless steel's characteristics.
How to use Picklinox paste?
Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable time depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.
In stock
RHODIUS
Reference: 303151
€19.11
15,54 € tax excl.
Fast delivery
2-year warranty
Non-woven disc for extremely high cleaning performance and maximum material removal
In stock
Gys
Reference: 041332
(40 reviews)
€37.82
30,75 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
Supplier stock
Urko tools
Reference:
€42.53
34,58 € tax excl.
Fast delivery
2-year warranty
2 models of sheet metal shear available
Body panel shear and industrial sheet metal shear
The industrial sheet metal shear has a cutting capacity of: 20 mm in steel and 12 mm in stainless steel.
In stock
FISCHER-DAREX
Reference: 4176
(1 review)
€10.20
8,29 € tax excl.
Fast delivery
2-year warranty
Spring compass with polished steel tips
Length 150 mm
Screw adjustment
C-clamp for sheet metal.
3 possible clamping sizes.