Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- Pack
Reference: 816146+804415
TELWIN | Plasma cutter pack Technology 41XT + consumables box
€968.63
787,50 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
Instead of €994.25
Characteristics of TELWIN | Plasma cutter pack Technology 41XT + consumables box
| Supply voltage (in Volts) | 50 / 60 Hz - 230 Volts | Fuse (in Amperes) | 16 A |
| Duty cycle at 40° of the plasma cutter | 35A@30% - 25A@60% - 20A@100% | Open circuit voltage (in Volts) | 313 |
| Cutting current | 10 - 40 A | Clean cut thickness | 15 mm |
| Cutting thickness in separation | 18 mm | Air pressure | 4-5 Bars |
| Warranty | 2 years | Dimensions (in mm) | 420 X 182 X H292 |
| Weight in kg | 7 | Protection rating | IP23 |
Documents
Accessories for TELWIN | Plasma cutter pack Technology 41XT + consumables box
€25.34
10 medium electrodes for plasma cutter
Reference: PR0110
€19.68
10 nozzles for plasma cutter
Reference: PD0116
€69.10
4 shield nozzles for plasma cutter
Reference: PC01
€16.78
2 diffusers for plasma cutter torch
Reference: PE0106
€101.48
Compass Kit for Plasma Torch MT25K /35K - TPT40 - Z
Reference: 040205
€21.01
Lincoln - 1 cutting guide for plasma cutter torch LC 25 or LC30
Reference: W03X0893-78R
€35.67
Cutting guide carriage for plasma torch
Reference: 040199
€107.63
Consumable kit for Telwin plasma cutter
Reference: 804415
€148.62
Special impurity filter for plasma cutter
Reference: W88X1456A-LAF1250
€173.74
Cartridge for special plasma impurity filter
Reference: W8800117RCustomer reviews
Product reviews
-
Products conform to the description and of quality
-
Very good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Supplier stock
Gys
Reference: 081093
€3,683.85
2 995,00 € tax excl.
or 4 x 920,96 €
Free delivery
2-year warranty
The CUTTER 105 CT is a high-performance plasma cutter, lightweight (29 kg) and powerful (105 A), designed for intensive use both in the workshop and on site. It provides a cutting capacity of up to 50 mm thickness on steel and offers 5 operating modes: cutting solid sheets, perforated sheets and gouging.
Key performance
-
High duty cycle: 105 A at 60%, for maximum productivity.
-
Cuts all types of metals (mild steel, stainless steel, hardened steel, HLE, aluminium, copper).
-
Concentrated arc for a clean cut with minimal slag.
Suited for harsh environments
-
Optimised cooling with electronic dust protection.
-
Reinforced casing, anti-shock feet, IP23 protection for outdoor use.
-
Compatible with generator (30 kW recommended).
-
Can be transported by a single person.
Ease of use
-
5 cutting modes with locked trigger options.
-
Manual air pressure adjustment with front panel indicator.
-
Air filter with automatic purge to protect the torch.
-
HF-free ignition, avoiding electronic interference.
-
Integrated consumables compartment.
-
Optional analogue CNC kit for cutting tables.
-
Easy software update via USB-B port.
Save 20%
In stock
Gys
Reference: 080768
(2 reviews)
€1,430.02
€1,787.52
1 162,64 € tax excl.
or 4 x 357,51 €
Free delivery
2-year warranty
Thanks to its integrated compressor, the EASYCUT K35 PFC plasma cutter allows you to cut metal on any construction site where a single-phase power supply is available.
Its PFC technology allows it to operate from 195 V to 265 V and achieve quality cuts even on 100 m construction site extension cords.
Small, lightweight and easy to transport, it is capable of delivering 35 A of power to cut different types of metals up to 15 mm thick in separation cut.
Automatic air regulation adapted to the TPT 35 torch.
Cuts all steels (mild, stainless, hardened, HSLA), aluminum, copper, etc. and cutting speed higher than Oxy-fuel thermal cutting
Very practical on construction sites thanks to its integrated compressor.
Internal air filter with automatic purge to prevent condensation in the torch.
HF-free ignition that avoids interference that could damage nearby electronic equipment.
Storage compartment for consumables.
Ideal for travel and construction sites
Accepts extension cords up to 100 m.
Reinforced body and anti-shock skids.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Rated IP23S to withstand harsh environments.
Optimized cooling with a ventilation channel that isolates the electronic components from dust.
Delivered with:
a TPT 35 torch with a length of 4 m
a ground clamp with a 10 mm² cross-section cable, length 2 m
Two nozzles and two electrodes
Save 10%
In stock
Telwin
Reference: 816148
(2 reviews)
€1,224.87
€1,360.97
995,83 € tax excl.
or 4 x 306,22 €
Free delivery
2-year warranty
This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with a warning indicator light for consumable replacement
Supplied with a 4 m torch + ground clamp and 3 m cable
In stock
Gys
Reference: 013858
€970.73
789,21 € tax excl.
or 4 x 242,68 €
Free delivery
2-year warranty
The EASYCUT 30 FV is a 30 A plasma cutter capable of cutting steel up to 10 mm (15 mm separation cut). Its HF-free ignition extends consumable life and protects surrounding electronic equipment. Ideal for maintenance and bodywork, it combines robustness with ease of use.
Thanks to inverter technology, it delivers quality cutting on mild steel, stainless steel, hardened steel, HSLA, aluminium and copper. The interface is clear with manual adjustment of current and air pressure via a front-panel flow meter.
The ergonomic 4 m air-cooled torch is designed for safe, stable and shock-resistant use. It is easily disconnectable for easy transport.
Equipped with Flexible Voltage technology (85–265V) and PFC, it adapts to all single-phase voltages and optimises power consumption with up to 30% energy savings. Its reinforced casing, anti-slip feet and compact format make it a reliable and portable tool for all environments.
In stock
Telwin
Reference: 816147
(3 reviews)
€1,224.87
995,83 € tax excl.
or 4 x 306,22 €
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables clean cutting of materials up to 12 mm thick or 15 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable change indicator device
This cutter is fitted with a warning indicator light for consumable replacement
Delivered with a 4 m torch + ground clamp and cable 3 m long
Save 10%
In stock
Gys
Reference: 013629
(5 reviews)
€1,430.03
€1,588.92
1 162,66 € tax excl.
or 4 x 357,51 €
Free delivery
2-year warranty
The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 20* mm thickness on a wide range of materials. Designed to operate in harsh environments, it features a very robust mechanism and an intuitive control panel.
• Cuts steels (mild, stainless, hardened, HSLA), aluminum, copper…
• 3 working modes:
- Cutting on solid sheets
- Cutting on grid supports
- Trigger lock
• HF-free ignition that avoids interference which could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.
Supplied with a TPT 40 torch for cutting only, with a length of 4 m.
* Clean cut is 15 mm, separation cut 20 mm and piercing 8 mm when this cutter is equipped with a TPT 40 torch
Supplier stock
ESAB
Reference: 0559170004
€3,646.95
2 965,00 € tax excl.
or 4 x 911,74 €
Free delivery
2-year warranty
The Cutmaster 70+ plasma cutter is the ideal combination of power and portability for portable plasma cutting machines. Portable and durable with its three handles and a lightweight, industrial, weather-resistant enclosure. The bright 10.9 cm (4.3-inch) TFT LCD screen with a glove-compatible adjustment knob simplifies use and allows for increased control and flexibility.
Supplier stock
ESAB
Reference: 0559150004
€3,064.75
2 491,67 € tax excl.
or 4 x 766,19 €
Free delivery
2-year warranty
The Cutmaster 50+ plasma cutter is the ideal combination of power and portability for portable plasma cutting machines.
Portable and durable with its three handles and a lightweight, industrial, weather-resistant enclosure. The bright 10.9 cm (4.3-inch) TFT LCD screen with a glove-compatible adjustment knob simplifies use and allows for increased control and flexibility.
Supplier stock
Telwin
Reference: 816070
€1,965.54
1 598,00 € tax excl.
or 4 x 491,39 €
Free delivery
2-year warranty
Inverter plasma cutter with contact pilot arc ignition.
Enables fast, distortion-free cutting, cutting on mesh and gouging of all conductive materials, such as steel, stainless steel, galvanised steel, aluminium, copper, or brass for example.
Easy-to-read digital display.
High cutting current stability.
Thermostatic protections for over-voltage and under-voltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20–30 mm depending on materials.
Adjustment range: 20 to 70 A
Options:
1) Interface with automated cutting table
2) Remote control
Requires connection to a compressor delivering 200 l/min of air at a pressure of 4–5 bar.
Supplied with:
In stock
Telwin
Reference: 816146
(2 reviews)
€886.62
720,83 € tax excl.
or 4 x 221,66 €
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass....
It is compact and has a small footprint (420 x 182 x H 292 mm) and weight (7 kg)
This cutter allows a clean cut on materials up to 15 mm thick or 18 mm in separation.
It allows piercing of sheet metal (refer to the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable replacement indicator device c
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with an indicator light signalling the need to replace consumables.
Delivered with a 4 m torch + earth clamp and cable 3 m long
Save 5%
Supplier stock
Lincoln Electric
Reference: K14391-1
€1,835.68
€1,932.29
1 492,45 € tax excl.
or 4 x 458,92 €
Free delivery
2-year warranty
The Tomahawk 45 plasma cutter is light enough to be transported to any job site — simply connect the compressed air and start cutting immediately.
Ideal for maintenance work, small-scale fabrication (e.g. ventilation duct installation), demolition work..
- High performance - Innovative electrode and cutting nozzle design.
- Flexible - a single-phase 230V power supply is sufficient.
- Contact cutting device Reliable plasma arc ignition without high frequency.
- Enhanced safety: The parts-in-place system detects correct installation of torch consumables
- Cutting of various metals – Unalloyed steel, stainless steel, aluminium and others.
Power supply from a generator is possible
Output current range 15 - 45 A
Duty cycle 40A@60% - 45A@145% - 30A@100%
Example of possible cutting thickness for steel:
Recommended cutting thickness: 16 mm
Clean cutting thickness: 20 mm maximum
Severance cutting thickness: 25 mm maximum
Supplied with
One manual torch length 6 m - EURO connector
Cable and ground clamp
In stock
Gys
Reference: 029743
(15 reviews)
€815.05
662,67 € tax excl.
or 4 x 203,76 €
Free delivery
2-year warranty
Suitable for maintenance and bodywork, the EASYCUT 40 plasma cutter easily cuts all types of metal up to 15 mm thick. With a power output of 40 A, it excels at precision cutting at low amperage.
Inverter technology ensuring quality cutting on all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Easy and quick consumable installation (Trafimet® standard).
Efficient cutting: air-cooled torch body providing high arc stability at various operating levels.
Easy-to-use trigger mechanism for greater comfort. Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required.
Manual air pressure adjustment (2.5 < 6.5 bar) with front panel bargraph.
Automatic torch detection.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Protected against overvoltage and overcurrent
Torch presence or insufficient air pressure indicator.
→ Requires connection to a compressed air supply delivering 100 l/minute at a variable pressure between 2.5 and 6.5 bar depending on the machine setting.
Supplied with a TPT 40 torch 4 m long and a 10 mm² section earth clamp cable 2 m long.
Supplier stock
ESAB
Reference: 0559130004
€1,677.60
1 363,90 € tax excl.
or 4 x 419,40 €
Free delivery
2-year warranty
The Cutmaster 30+ combines power and portability, offering a high-performance solution for plasma cutting. Its 4.3" TFT LCD screen and enhanced features ensure precise control and increased flexibility for clean cuts up to 10 mm. Equipped with the SL60 1Torch, you get the complete plasma cutting package.
Recommended piercing and cutting capacity: 10 mm
Maximum edge cutting capacity: 16 mm
Key features:
- Portable and durable with three handles and an industrial, lightweight, weather-resistant enclosure
- Bright 4.3" TFT LCD screen with glove-friendly adjustment knob to simplify use and provide increased control and flexibility
- Dual input 120-240 V, single-phase power supply with automatic voltage detection that defines the maximum output amperage
- Equipped with an SL60 1Torch industrial torch with 2T/4T function, safety trigger lock and dual-pressure trigger to preserve bottled air
- Switching between normal cutting and grid cutting modes
- Automatic air pressure detection and post-cut air purge to extend consumable life
- Duty cycle of 40% at 30 A (120V) 100% at 20 A (120V)
- Cutmaster Black Series consumables included for up to 60% longer service life
- 3-year warranty on the power supply and 1-year warranty on the torch and cables
Save 10%
In stock
Gys
Reference: 065543
(2 reviews)
€635.51
€706.12
516,67 € tax excl.
or 4 x 158,88 €
Free delivery
2-year warranty
The EASYCUT 25 plasma cutter is an ideal solution for precise cutting of all types of metals up to 8 mm thick. Ultra-lightweight (7.8 kg) and easy to transport, it delivers excellent performance without compromising on quality.
Equipped with inverter technology, it ensures clean cutting on steel (mild, stainless, hardened, HSLA), aluminum, copper, and more. Its HF-free ignition protects nearby electronic equipment, while its ergonomic torch, resistant to shocks and heat, ensures comfort and stability.
Easy to use, the EASYCUT 25 features an intuitive control ring, manual air pressure adjustment (2.5 to 6.5 bar) with a bargraph, as well as automatic torch detection. Its robust design with reinforced body and disconnectable components makes it a reliable and durable tool, ideal for workshops and bodywork applications.
Supplier stock
Gys
Reference: 013636
€2,331.83
1 895,83 € tax excl.
or 4 x 582,96 €
Free delivery
2-year warranty
The Gys CUTTER 70 CT plasma cutter has a cutting capacity of 35 mm thickness on steel and 25 mm on aluminium in separation.
Suited to industrial environments, it is highly effective on solid sheets, mesh or painted structures.
Cutting speed superior to oxy-fuel.
Cuts all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Optimised unit cooling thanks to the ventilation channel that isolates electronic components from dust.
Easy and fast consumable installation for maximum efficiency.
Premium TECMO® torch (leading supplier in Europe).
Superior cut quality: air-cooled torch body offering excellent arc stability at various operating levels.
Hypertherm®-compatible consumables.
Designed to withstand shocks and heat.
Quick torch connection/disconnection without tools, facilitating transport and maintenance.
Easy-to-use trigger mechanism for greater comfort.
Intuitive control panel: - 3 working modes: solid sheet / perforated sheet / lock -
manual air pressure adjustment (4.1 < 6.5 bar) with front bargraph.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Compatible with CNC kit for automated cutting table.
Gouging with maximum removal - Enables significant metal elimination (Pad and Nozzle specific options available)
Reinforced casing & non-slip feet.
Supplied with: one earth clamp + cable 4 m long - 10 mm² cross-section
This plasma cutter requires connection to a compressed air source with a flow rate of 185 L / minute.
Save 10%
In stock
Gys
Reference: 068063
€917.37
€1,019.30
745,83 € tax excl.
or 4 x 229,34 €
Free delivery
2-year warranty
The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).
Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).