SILICONI | CERAMSTAK protection for welding torch

PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.

Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.

INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS

 It is also possible to apply this anti-spatter product with a brush on the surface to be treated.

Ceramic-based anti-spatter spray with very fast drying that protects welding equipment and wear parts against welding spatter.

Extremely fast drying (a few seconds)
Long-lasting hold and resistance of the protective film

Ceraskin guarantees 8 hours of continuous welding work without needing to reapply the product

Silicone-free anti-spatter spray for protection of contact tips and gas nozzles.
Volume 400 ml
For use on cold parts, compatible with paint.

MOLISIL is used as an anti-spatter product to protect the torch "nozzle" against droplet adhesion.
It is a very effective anti-spatter because it contains MOS2 and graphite in slightly higher quantities than a standard anti-spatter product
(oil-based).
MOLISIL can also be used as a lubricant to lubricate moving mechanical parts, prevent friction and reduce wear. It is used for high-temperature lubrication.

500 ml aerosol can

INSTRUCTIONS FOR USE

Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve clogging.

SPECIFICATIONS

Base: Molybdenum disulphide and graphite
Propellant: Odourless denatured hydrocarbon.
Temperature resistance: 700°C
Appearance: Dry grey film
CFC-FREE CHLORINE-FREE

DISTAC WELD is a silicone-free anti-spatter aerosol for metal.
It is used as an anti-spatter product for parts to be welded and also as protection for welding torch nozzles.
Thanks to its silicone-free composition, it allows subsequent treatments such as varnishing, galvanising, chrome plating, etc.
It makes welding easier and faster and helps prevent the formation of cracks and crevices.

500 ml aerosol

DIRECTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Spray the product around the parts to be welded at a distance of 25 cm.

SPECIFICATIONS
Base: Mixture of synthetic silicone-free anti-spatter agents
Propellant: Denatured and odourless hydrocarbon, flammable
Appearance: Clear oil
Temperature resistance: Up to 250°
Biodegradability: More than 85%
Film thickness: 2 to 3 microns
CONTAINS NO CFC OR DICHLOROMETHANE

ANTITEK® is a new generation water-based anti-spatter aerosol, harmless to users. Thanks to its composition, silicone-free and with selected raw materials, ANTITEK® allows subsequent and successive surface treatments (painting, galvanizing or chrome treatment)
ANTITEK® is used to prevent the adhesion of impurities or spatter on welded elements or on the wear parts of welding torches.

500 ml aerosol

INSTRUCTIONS FOR USE
Spray around the end of the torch or on the metal to be welded or cut.
Do not spray on welding strips.
Shake before use.
Apply a first burst into the air when the aerosol is new.
Spray at a distance of 25-30 cm from the parts to create a film that will prevent spatter. Do not spray too long, or closer than 25 cm from the part.
Do not spray an excessive amount of product.
Degrease the welded part with detergent products before proceeding with surface treatments.
Use-by date: 10 months from the production date indicated on the aerosol.

CHARACTERISTICS
Base: Synthetic oil mixed with water base. SILICONE-FREE.
Propellant: Mixed, denatured, non-toxic, ecological gas.
Appearance: Clear liquid
Viscosity at 25°C: 20-50 cst
Odor: None
Anti-spatter performance: Very good

NETMIG is a paste that prevents welding spatter from adhering to nozzles or contact tips.
Does not clog orifices or threads
Does not cause porosity
Solvent-free, silicone-free and odourless.

Compatible with all MIG-MAG torches except fume extraction torches.

Volume 300g

The active ingredient of the SOUDURE ANTI-GRATTONS is effective over time and benefits from high anti-adhesion properties that prevent the adhesion of metal spatter and weld spatters on welding torch nozzles or any surfaces near the work area. Formulated without chlorinated or petroleum solvents, the SOUDURE ANTI-GRATTONS is neither toxic nor irritating.

Thanks to its specific water-based formulation, the SOUDURE ANTI-GRATTONS is non-flammable, releases no unpleasant odour and generates neither smoke nor dangerous vapours for the user during welding operations. The SOUDURE ANTI-GRATTONS is 92% biodegradable.

The SOUDURE ANTI-GRATTONS rinses off very easily with water and contains corrosion inhibitors. Silicone-free, it is compatible with post-finishing operations and can be used on surfaces that are to be painted, bonded or varnished.

The SOUDURE ANTI-GRATTONS is particularly recommended when you want to avoid any trace of grease on metal surfaces. It also facilitates the demoulding of parts made of polyurethane, polyester, epoxy, various plastics or rubber moulded by injection, compression or casting.

SOUDURE ANTI GRATTONS Silicone-free water-based anti-adhesion spray

MAIN CHARACTERISTICS
• Water-based formula without chlorinated or petroleum solvents
• Prevents the adhesion of molten metal spatter: welding spatter.
• Non-flammable
• Easy removal of welding spatter by simple brushing
• Transparent film in the form of micro-droplets
• Long-lasting protection
• Releases no vapour or smoke
• No unpleasant odour • Mould release action
• Contains a corrosion inhibitor
• Very easy removal of the SOUDURE ANTI GRATTONS film
• Silicone-free to facilitate post-finishing operations

FIELDS OF APPLICATION
• Protection of the welding station environment
• Protection of parts before welding
• Nozzle, soldering iron tip
• Welding robots
• Steel or aluminium moulds • Mould release agent for plastic injection moulding