Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
Reference: 802582-804109
Multi-purpose special MIG MAG pliers
€18.40
14,96 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
Customer reviews
Product reviews
-
You just need to resize the pliers tips to be able to properly clean the nozzle.
-
Not yet used
-
Top
-
Nickel
-
Fast service
-
Tip too big to clean the inside of the nozzle.
-
Perfect
-
Good but nozzle cleaning nozzles a little thick for small nozzles
-
Very good
-
particularly effective product.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Sacit
Reference: KIT-512/528
(9 reviews)
€71.40
58,05 € tax excl.
Fast delivery
2-year warranty
NEVADA 3 ground clamp + 35 mm² cable available in lengths of 3 and 4 m
Duty cycle 300 A @60% - 400 A @ 35%
Dinse TX 50 connector
H01N2-D-HAR rubber electrical wiring
Electrozinc-plated sheet steel clamp with brass contacts bridged by a copper braid. Cable clamped with a copper strip and steel cable clamp
Maximum opening 73 mm.
In stock
Gys
Reference: 042889
(13 reviews)
€4.61
3,75 € tax excl.
Fast delivery
2-year warranty
This adapter for a 5 kg welding wire spool is mounted on the shaft of your 15 kg spool holder so that your welding machine accepts Ø 200 mm spools.
It is used in particular with the Multi-Pearl 201-4 welding machine available on our website.
In stock
Trafimet
Reference: GM07
(8 reviews)
€30.17
24,53 € tax excl.
Fast delivery
2-year warranty
Trafimet Teflon wire liner with copper terminal for aluminium wire
2 lengths available: 3 metres and 4 metres
2 liner diameters available:
For aluminium wire Ø 0.6 to 0.9 mm reference GM0710 (blue liner) length 3 metres
For aluminium wire Ø 1 and 1.2 mm reference GM0715 length 3 metres (red liner) and GM0716 length 4 metres
Soudure pro
Reference: 010845
(20 reviews)
€40.90
33,25 € tax excl.
Fast delivery
2-year warranty
CuSi3 solid wire
Wire spool Ø 100 mm - Weight 0.8 KG - Wire Ø: 0.8 mm
Welding wire suitable for HSS steel in MIG Brazing mode on electro-galvanized or galvanized steels or Cu-Si, Cu-Mn alloys.
Wire recommended for joining copper materials and various steel sheets.
Wire particularly used in the automotive industry (HSS steel, better wetting performance)
Wire classification: AWS A5.7: ERCuSi-A EN ISO 24373: S Cu 6560 (CuSi3Mn1) DIN 1733 SG-CuSi3
Shielding gas required during welding: Pure Argon
In stock
Gys
Reference: GYS+GAL1D-FLUX
(7 reviews)
€17.93
14,58 € tax excl.
Fast delivery
2-year warranty
Reversible roller for:
Solid wire Ø0.8 / flux-cored wire 0.9
Flux-cored wire Ø 0.6 / 0.9 mm
Suitable for GYS machines:
Easymig 110 - 130 and 140
Smartmig 110
suitable for DECA machines:
Miga 215 - Miga 218 and Miga 220.
suitable for SCHUMACHER machines:
M 120 NG
D 144WG
In stock
Trafimet
Reference: MD0009
(31 reviews)
€9.15
7,44 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Trafimet contact tips for welding with steel or aluminium wire
3 diameters available: 0.8 - 1 and 1.2 mm
M6 thread. Length 28 mm
For Mig-Mag torch 250A @60%
In stock
Le Lorrain
Reference: 054201
(3 reviews)
€203.97
165,83 € tax excl.
or 3 x 67,99 €
Free delivery
2-year warranty
This column regulator provides very precise gas flow control, ideal for TIG welding of stainless steel and aluminium
Regulator set at 3.5 bar with column (rotameter) from 0 to 30 L
Type C connection thread
French Manufacturing
In stock
Le Lorrain
Reference: 054200
(16 reviews)
€162.98
132,50 € tax excl.
or 3 x 54,33 €
Free delivery
2-year warranty
The DDI regulator is a new generation regulator for rechargeable gas cylinders — compact, extremely sturdy and easy to use
This regulator is designed for use with neutral welding gases such as pure Argon or Argon + CO²
It offers many advantages:
It corrects overpressure issues related to the use of gas welding equipment
It is very easy to use: the recommended welding pressures are pre-set
The pre-set working pressure allows for gas savings
The high-pressure gauge is protected by a PA casing
Type C connection thread
Made in France
In stock
StrongHandTools
Reference: MAV120
(1 review)
€252.10
204,96 € tax excl.
or 3 x 84,03 €
Free delivery
2-year warranty
Adjustable magnetic square from 30 to 275° Fast and efficient for holding round or flat pieces together. Handle to adjust and lock the desired angle
In stock
Weldline
Reference: W000335164
(10 reviews)
€7.07
5,75 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
Save 10%
In stock
DECA
Reference: 010464
(12 reviews)
€76.87
€85.41
62,50 € tax excl.
Fast delivery
2-year warranty
MIG torch for DECA welding machine using flux-cored wire (gasless) suitable for the following machines:
DECASTAR 130 AC
STARFLUX 130 AC
D-MIG 230
Length 2 m
140 A @ 60%
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
HELVI
Reference: 23005007
(7 reviews)
€8.97
7,29 € tax excl.
Fast delivery
2-year warranty
This nozzle fits on the end of your MIG torch
Its role is to direct the gas flow toward the weld and the melting wire.
This nozzle has an internal thread fitting the torches of HELVI Fox 160 and Panther 132 welding machines
In stock
Sacit
Reference: WP2116
(39 reviews)
€5.33
4,33 € tax excl.
Fast delivery
2-year warranty
Specific cable for welding, compliant with the European low voltage directive.
Sheath color: BLACK.
Reference standard: H01N2-D HAR.
Operating characteristics:
Maximum operating temperature of the copper braid: 90 °C.
Short-circuit temperature: 250 °C.
Good resistance to abrasion, atmospheric agents and ozone.
Good resistance to frequent bending and twisting.
Type of use: Production of ground cables and electrode holder cables.
During application the welding cable must not be coiled.
Three sections available:
16 mm² for use 120 A @60% - 130 A @35%
25 mm² for use 164 A @60% - 184 A @35%
35 mm² for use 210 A @60% - 241 A @35%
Sold by the linear meter
If you want 2 linear meters of cable, you must order 2 pieces in your cart.
In stock
HELVI
Reference: 33805104
(2 reviews)
€13.27
10,79 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag welder for aluminum welding wire Ø 0.8 and 0.1 mm.
Also compatible with the following Helvi welder models:
Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195
In stock
Trafimet
Reference: ERGOPLUS-15P
(8 reviews)
€73.48
59,74 € tax excl.
Fast delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 15 Premium
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural grip handle,
- new plastic spring flexible support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- reduced swan neck temperature,
- reduced consumable utilization rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Air-cooled.
Duty cycle: 150 A @ 60%
For use with Ø 0.6 to 0.9 mm welding wire
Accepts M6 threaded contact tips
Originally equipped with a liner for 0.6 / 0.9 mm wire, and a 0.8 mm contact tip.
In stock
Sacit
Reference: F11373
(5 reviews)
€39.15
31,83 € tax excl.
Fast delivery
2-year warranty
Rotating magnetic earth clamp 400 Amperes
Duty cycle 300 A @ 60% and 400 A @ 35%
Ideal for welding parts with a large flat surface
Maximum cable cross-section: 16-25 / 35-50 mm²
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle