This accessory allows the use of wire spools with a diameter of 100 mm (flux-cored, stainless steel or aluminum wire) on Telwin welding machine models when not supplied upon purchase.
This is particularly the case for the welding machine: Technomig 215 Dual Synergic.
14,90 € tax excl.
This accessory allows the use of wire spools with a diameter of 100 mm (flux-cored, stainless steel or aluminum wire) on Telwin welding machine models when not supplied upon purchase.
This is particularly the case for the welding machine: Technomig 215 Dual Synergic.
very good
Very good
Meets my expectations
T
Complies with the order and identical to the original. No problem with replacement.
Impeccable just had to remove 3 nipples but it's perfect, good price, delivered quickly, I can confirm
Highly heat protective gloves
Apart from delivery nothing to say
This positioner allows you to precisely position the part and activate the magnet function after placement, which is much more practical than with permanent magnets.
not yet used -
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
In stock
Telwin
Reference: 722305
€17.38
14,13 € tax excl.
Fast delivery
2-year warranty
Swan neck for MIG-MAG torch reference MT 15 found on Telwin brand welding machines, models
Technomig 180 Euro - Technomig 210 and 215
Electromig 220 - Mastermig 220/2
In stock
Trafimet
Reference: MC0017
€8.97
7,29 € tax excl.
Fast delivery
2-year warranty
This nozzle fits onto the end of your MIG torch
Its role is to direct the gas flow towards the weld and the molten wire.
Its small diameter allows work in tight spaces where room is limited.
In stock
Sacit
Reference: GAMMA
€13.49
10,97 € tax excl.
Fast delivery
2-year warranty
Die-cast brass earth clamp
Copper strip shunt for optimum conductivity
Cable secured with malleable copper lamella and copper-plated steel cable clamp
GAMMA 0 For cable cross-section 16 - 25 mm²
150 A @ 60% and 200 A @ 35%
Opening: 45 mm
GAMMA 1 For cable cross-section 25 - 35 mm²
200 A @ 60% and 250 A @ 35%
Opening: 55 mm
GAMMA 2 For cable cross-section 50-70 mm²
400 A @ 60% and 500 A @ 35%
Opening: 65 mm
In stock
SOUDO METAL
Reference: MI-MPH35
€16.40
13,33 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg
In stock
Trafimet
Reference: GM0512
€8.66
7,04 € tax excl.
Fast delivery
2-year warranty
Wire liner for steel or stainless steel wire - Length 5 m for wire Ø 1 and 1.2 mm.
Inner diameter 2 mm and outer diameter of the liner 4.6 mm
In stock
Trafimet
Reference: MD0009
€9.15
7,44 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire
3 diameters available: 0.8 - 1 and 1.2 mm
M6 thread. Length 28 mm
For MIG-MAG torch 250A @60%
In stock
Hyundai
Reference: Supershield.11
€81.95
66,63 € tax excl.
Fast delivery
2-year warranty
Flux-cored wire spool for welding structural steels for general use and galvanized steels.
All-position welding.
Stable arc, easy to control, low spatter.
Application field: Light metal construction, Automotive bodywork, round steel for concrete .....
Perfectly suitable for outdoor welding work and repair work, when the use of gas-shielded wire is not possible.
Wire section offered: 0.9 mm
Standard AWS A5.20 - E71T-11
The use of this welding wire does not require a gas shielding during operation. It is the flux core of the melting wire that provides protection during the welding process.
Delivered in cardboard box.
Spool Ø 200 mm weight 5 kg
In stock
HELVI
Reference: 33805101
€9.18
7,46 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag Fox 185 Flex Line welder for steel and stainless steel welding wire Ø 0.8 and 0.1 mm.
Also compatible with the following Helvi welder models:
Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195
In stock
DECA
Reference: 011224
€42.53
34,58 € tax excl.
Fast delivery
2-year warranty
2 drive rollers for DECA multi-process machine reference JOB 522 or 523 LAB, for flux-cored welding wire (gasless) with diameter 0.8 to 1.2 mm.
In stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Aluminium
€110.70
90,00 € tax excl.
Fast delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
Supplier stock
DECA
Reference: 010470
€162.98
132,50 € tax excl.
or 3 x 54,33 €
Free delivery
2-year warranty
MIG torch for DECA brand machine suitable for models:
DECASTAR 140 - 150E and 180E.
DECAMIG 4180 E and DECAMIG 4190 E
D-MIG 350 - D-MIG 380 (if torch is fixed to the machine)
Length 2 m
160 A @ 60 %
This reference is a replacement accessory; it is not required when purchasing a new machine.
Supplier stock
Trafimet
Reference: MA4202-030-ALU
€117.87
95,83 € tax excl.
Fast delivery
2-year warranty
New MIG-MAG Torch Trafimet model Ergoplus 25 Premium
The MIG ERGOPLUS torch series has been redesigned, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible spring plastic support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m fitted with a liner and a contact tip for aluminium wire Ø 1 mm
Euro connector
Air cooling.
Duty cycle: 220 A @ 60%
Supplier stock
DECA
Reference: DECA-GAL-JOB220
€14.19
11,54 € tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
DECA
Reference: 010673
€4.61
3,75 € tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
In stock
HELVI
Reference: 33805063
€15.33
12,46 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag welder for steel or stainless steel welding wire Ø 1 and 1.2 mm.
Also compatible with the following Helvi welder models:
Multimaker 192
Panther 152 / 172
Easymig 177 / 188 / 208N / 238
Monomig 166
Fox 180 / 181
Monomig 186 / 196
Diameter: 30.23 mm
Thickness 15.40 mm
Bore 9 mm
In stock
DECA
Reference: DECA-2GAL-JOB522-AL
€33.83
27,50 € tax excl.
Fast delivery
2-year warranty
The drive rolls proposed below are compatible with the following DECA multi-process welding machines:
JOB 522 and 523 LAB
for aluminum welding wire
Ø 0.8 / 1 mm
Ø 1 / 1.2 mm
This accessory allows the use of wire spools with a diameter of 100 mm (flux-cored, stainless steel or aluminum wire) on Telwin welding machine models when not supplied upon purchase.
This is particularly the case for the welding machine: Technomig 215 Dual Synergic.
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
