Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Reference: 802955
Automatic plasma torch length 12 m - with consumables
€958.38
779,17 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Description
Important
The torch must be fitted with the correct consumables, chosen according to the application and the set current. A poor choice of consumable will cause cutting defects, premature wear of consumables and even malfunction of the entire unit.
Regularly check the wear condition of the protective nozzle, the tip and the electrode, or in the event of a significant reduction in cutting speed. It is recommended to replace the tip and electrode at the same time.
Consumables are wear parts; it is important to know when to replace them. Visually: melted or damaged consumables, nozzle holes>1.5mm, worn electrodes, melted pads… Practically: loss of cutting performance, difficult arc starting on workpiece, etc.
Regarding the nozzle: Tighten the nozzle so that all parts are firmly locked. The nozzle should not turn easily.
Use compressed air with oil and water filtration.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Lincoln Electric
Reference: W100000329
€50.12
40,75 € tax excl.
Fast delivery
2-year warranty
5 nozzles 45 A for Lincoln plasma cutter torch, original supply with the Tomawak 45
Supplier stock
Reference: W100000325
€444.85
361,67 € tax excl.
or 4 x 111,21 €
Free delivery
2-year warranty
Lincoln LC 30 4M plasma torch FOR LINCOLN TOMAHAWK 30K MACHINE
Save 20%
In stock
Telwin
Reference: 804059
€153.70
€192.13
124,96 € tax excl.
or 3 x 51,23 €
Free delivery
2-year warranty
This compass kit delivered in a case is suitable for the torches on the following plasma cutters:
Superior plasma 70
Superior plasma 100
Superior plasma 160
Save 10%
Supplier stock
Trafimet
Reference: CV0025
€73.43
€81.59
59,70 € tax excl.
Fast delivery
2-year warranty
This compass kit can be used with the DECA 1235 and 1235 K plasma cutter.
Compatible with TRAFIMET torches, references:
-Ergocut S25K / S35K / S25
-Ergocut S45 / S45P
In stock
Gys
Reference: 040205
(7 reviews)
€101.48
82,50 € tax excl.
Fast delivery
2-year warranty
This compass kit for single-phase plasma torch is used with plasma cutters equipped with one of the plasma torch models below
MT25K - MT35K - TPT40 - Z
This kit also includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut circles up to 134 cm in diameter.
- Ideal for making circular cuts between 10 and 134 cm in diameter.
- Magnetic centring pin for fast cuts on all ferrous surfaces.
- Screw-in centring pin for non-metallic materials.
- "Centre punch" centring pin for precise centring without perforating the sheet metal.
In stock
Gys
Reference: 037618
(1 review)
€89.18
72,50 € tax excl.
Fast delivery
2-year warranty
Ohmic detection nozzle 20 / 70 A designed for use with the Plasma torch reference AT-70
In stock
Gys
Reference: 037601
(3 reviews)
€48.49
39,42 € tax excl.
Fast delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
In stock
Lincoln Electric
Reference: W03X0893-78R
€21.01
17,08 € tax excl.
Fast delivery
2-year warranty
Cutting guide for plasma cutter torches on the Lincoln Invertec PC 210 and Tomahawk 30K plasma cutters
This cutting guide is designed for torch models LC25 and LC30
In stock
Lincoln Electric
Reference: W03X0893
(1 review)
€34.34
27,92 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
4 amperage options available depending on your needs: 40 - 60 - 80 - 100 A
Supplier stock
Telwin
Reference: 804415
(3 reviews)
€107.63
87,50 € tax excl.
Fast delivery
2-year warranty
This kit contains:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
This kit is suitable for the Telwin plasma cutters listed below
Technology 41XT
Infinity PLASMA 40
In stock
Telwin
Reference: 804169
(1 review)
€59.45
48,33 € tax excl.
Fast delivery
2-year warranty
This compass kit is suitable for the torches on the following plasma cutters:
Technology plasma 41 XT
Technology plasma 54 XT
Technology plasma 60 XT
In stock
Lincoln Electric
Reference: W03X0893-66A
(2 reviews)
€78.79
64,06 € tax excl.
Fast delivery
2-year warranty
1 gouging nozzle for Lincoln LC 105 plasma torch, manual or automatic
Compatible with the Tomahawk 1538 plasma cutter
Supplier stock
Telwin
Reference: 804976
€151.70
123,33 € tax excl.
or 3 x 50,57 €
Free delivery
2-year warranty
This CNC interface kit is installed between your plasma cutter and a numerically controlled cutting table
This kit is compatible with TELWIN brand plasma cutters whose model names are listed below:
Superior Plasma 70-100-160.
Cable length 10 m
In stock
Gys
Reference: 037632
(3 reviews)
€25.12
20,42 € tax excl.
Fast delivery
2-year warranty
1 gouging pad 20/70A for torch MT -70
Supplier stock
Telwin
Reference: 804041
€608.85
495,00 € tax excl.
or 4 x 152,21 €
Free delivery
2-year warranty
This manual plasma torch TWIN PV is suitable for the TELWIN plasma cutter: Superior Plasma 70
It is supplied with a 70 A nozzle.
Length: 6 m
- PV torch for plasma cutting system with 4-metre cable (EURO connection).
- Maximum current 65 A@60% / 50 A@100%.
- Maximum cutting thickness 20 mm.
- Equipped with an air cooling system (pressure 5 bar and flow rate 200-220 litres/min).
In stock
Lincoln Electric
Reference: W03X0893-77A
€32.29
26,25 € tax excl.
Fast delivery
2-year warranty
1 shield cup for Lincoln PC 210 and Tomahawk 30K plasma cutter torch
This nozzle is suitable for Lincoln LC 25 and LC30 torches
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m