Disposable Argon Cylinder Adapter - Flow meter for disposable Argon CO2 gas cylinder

Active filters

Filter by

Brand

Brand

By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.

Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.

Active filters

favorite_border favorite
Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)

In stock

Oxyturbo

Reference: 215310

Flow meter for disposable neutral gas cylinder (Argon and Argon +CO²)
(17 reviews)

€26.54

21,58 € tax excl.

Fast delivery

2-year warranty

Flow meter for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O².

The maximum possible setting with this regulator is 6 liters per minute when fully open

M10 thread
Ridged fitting for hose with inner Ø 6.3 to 7.5 mm

We offer two models

  • With one gauge to adjust the flow rate precisely  
  • With two gauges to check the fill level of the cylinder and adjust the flow rate precisely 

 

Regulators accepting gas hoses with an inner diameter of 6.5 to 7.3 mm

 

 

 

Combinations Price quantity
€26.54
€42.53
favorite_border favorite
Flow regulator for disposable neutral gas cylinder (Argon and Argon +CO²)

In stock

Oxyturbo

Reference: OXY215

Flow regulator for disposable neutral gas cylinder (Argon and Argon +CO²)
(257 reviews)

€40.90

33,25 € tax excl.

Fast delivery

2-year warranty

Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder

3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely

Regulators accepting gas hoses with 4 mm inner diameter

 

Combinations Price quantity
€19.37
€26.54
€40.90
favorite_border favorite
Gas supply adapter kit for disposable cylinder

In stock

Telwin

Reference: 990702

Gas supply adapter kit for disposable cylinder
(117 reviews)

€13.84

11,25 € tax excl.

Fast delivery

2-year warranty

This kit allows you to connect your Mig or Tig machine and your gas cylinder to your regulator for disposable cylinders.
It fits onto the rubber hose connected to the gas outlet fitting of your welding machine, and the other end of this small-diameter hose connects directly to the quick connector on the regulator for disposable cylinders.
Outer diameter of hose: 4 mm
Length 65 cm

Back to top