Supplier stock

ESAB

Reference: 0559130004

ESAB Cutmaster 30+

14,754.24 kr

14 754,24 kr tax excl.

Free delivery

2-year warranty

The Cutmaster 30+ combines power and portability, offering a high-performance solution for plasma cutting. Its 4.3" TFT LCD screen and enhanced features ensure precise control and increased flexibility for clean cuts up to 10 mm. Equipped with the SL60 1Torch, you get the complete plasma cutting package.

Recommended piercing and cutting capacity: 10 mm

Maximum edge cutting capacity: 16 mm

Key features:

Portable and durable with three handles and an industrial, lightweight, weather-resistant enclosure
Bright 4.3" TFT LCD screen with glove-friendly adjustment knob to simplify use and provide increased control and flexibility
Dual input 120-240 V, single-phase power supply with automatic voltage detection that defines the maximum output amperage
Equipped with an SL60 1Torch industrial torch with 2T/4T function, safety trigger lock and dual-pressure trigger to preserve bottled air
Switching between normal cutting and grid cutting modes
Automatic air pressure detection and post-cut air purge to extend consumable life
Duty cycle of 40% at 30 A (120V) 100% at 20 A (120V)
Cutmaster Black Series consumables included for up to 60% longer service life
3-year warranty on the power supply and 1-year warranty on the torch and cables

PACK: ROGUE ESAB ET201i Pro CE welding machine + Regulator + Gas

Save 865.41 kr

Supplier stock

ESAB

Reference: PET201iA

PACK: ROGUE ESAB ET201i Pro CE welding machine + Regulator + Gas

12,287.05 kr

13,152.46 kr

12 287,05 kr tax excl.

Free delivery

2-year warranty

This pack contains:
- ESAB TIG 201i Pro CE welding machine
- Regulator with flow meter and column 254400
- INDUS refillable gas cylinder

By choosing this pack, you save €80 on your purchase.

PACK: ESAB TIG 181iCE welding machine + Regulator + Gas

Save 865.42 kr

Supplier stock

ESAB

Reference: PET181iA

PACK: ESAB TIG 181iCE welding machine + Regulator + Gas

10,303.84 kr

11,169.26 kr

10 303,84 kr tax excl.

Free delivery

2-year warranty

This pack contains:
- ESAB TIG 181iCE welding machine
- Regulator with flow meter and column 254400
- INDUS refillable cylinder

By choosing this pack, you save €80 on your purchase.

Available for order

ESAB

Reference: 0367556004

ESAB | 1 drive roll for aluminum wire Ø 1/1.2 mm

319.77 kr

319,77 kr tax excl.

or 4 x 79,94 kr

Free delivery

2-year warranty

1 reversible drive roll for aluminum wire, section 1 and 1.2 mm, compatible with the ESAB welder references listed below.

ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c

Available for order

ESAB

Reference: 0349312497

0349312497

211.49 kr

211,49 kr tax excl.

or 3 x 70,50 kr

Free delivery

2-year warranty

1 feed roller for flux-cored wire (gasless) with diameter 0.9 to 1.2 mm, compatible with the ESAB welder references listed below.

ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c

Available for order

ESAB

Reference: 036755

ESAB | 1 roller for stainless steel or steel wire

(2 reviews)

319.77 kr

319,77 kr tax excl.

or 4 x 79,94 kr

Free delivery

2-year warranty

We offer 3 wire feed rollers for steel or stainless steel wire, compatible with the ESAB welder models listed below.

ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c

Combinations	Price	quantity
0.6 / 0.8 mm	207.16 kr
0.8 / 1 mm	207.16 kr
1 - 1.2 mm	319.77 kr

Available for order

ESAB

Reference: FILTRE-ESAB

ESAB |Pre-filter and Filter for SENTINEL A60 AIR powered welding helmet

(1 review)

369.64 kr

369,64 kr tax excl.

or 4 x 92,41 kr

Free delivery

2-year warranty

Pre-filter and P3 Filter for ESAB PAPR EPR-X1 powered air purifying respirator module
This powered air purifying respirator module fits the ESAB SENTINEL A60 AIR welding helmet

Reference 0700500902: pack of 5 pieces - retains particles to prevent clogging the filter
Reference 0700500903: single pack - retains fine particles

Combinations	Price	quantity
0700500903	369.64 kr
0700500902	80.70 kr

Available for order

ESAB

Reference: 700.600

ESAB | protective lenses for SENTINEL A60 and A60 AIR welding helmet

(5 reviews)

184.77 kr

184,77 kr tax excl.

or 3 x 61,59 kr

Free delivery

2-year warranty

Multiple choices available:

0700600880 : 2 clear outer lenses
0700600881: 2 amber outer lenses
0700600882 : 2 high-resistance clear outer lenses
0700600866 : 5 clear inner lenses

Combinations	Price	quantity
0700600880	184.77 kr
0700600881	189.31 kr
0700600866	65.34 kr
0700600882	270.44 kr

Available for order

ESAB

Reference: 0700300869

ESAB - TIG Torch ET17V length 4 m

(2 reviews)

2,388.87 kr

2 388,87 kr tax excl.

or 4 x 597,22 kr

Free delivery

2-year warranty

TIG torch with valve type 17, length 4 m
This torch is suitable for the REBEL 215 C welding machine

Duty cycle: 135 A@35%
Recommended gas flow: 5 to 10 L/minute
Shielding gas: AR or AR/He

Supplied with:
A ceramic nozzle GR 5 - Ø 8MM
A gold cerium electrode Ø 2.4 mm
An electrode holder and diffuser 2.4/3.2 mm

ESAB - REBEL 205ic AC DC | Multi-process AC DC inverter welder

Save 20%

Supplier stock

ESAB

Reference: 0700300998

ESAB - REBEL 205ic AC DC | Multi-process AC DC inverter welder

(2 reviews)

33,534.81 kr

41,918.52 kr

33 534,81 kr tax excl.

Free delivery

2-year warranty

This multi-process machine allows welding of: MIG-MAG including flux-cored wire, MMA, and AC/DC TIG

It therefore allows aluminium welding in TIG mode, making it the only one in its category.

Excellent performance in industrial MIG applications, flux-cored wire, MMA (including 6010 cellulosic electrodes), DC TIG and AC TIG.

- Advanced AC TIG features such as high-frequency arc starting, balance and offset adjustment, frequency adjustment up to 400 Hz and dual current. The DC TIG process also offers a pulsed mode up to 500 Hz.

- sMIG technology - The unique sMIG ("smart MIG") function allows the system to "learn" and constantly adapt to the operator's welding technique to deliver a stable arc and superior reproducible welds; it also increases the productivity of more experienced welders and reduces the training time of less experienced welders.

- Unmatched portability and robustness - Weighing 25.5 kg, the Rebel™ EMP 205ic AC/DC, with a 5-handle protection cage construction, can tackle any job in the workshop or on site.

- Multilingual TFT screen - feature-rich, the Rebel™ EMP 205ic AC/DC has 4 programmable memory slots for each process, language selection, inductance adjustment, pre/post gas flow adjustment and spot welding adjustment, allowing you to fine-tune your welds for optimal performance.

The welding machine is supplied with:

- 1 MIG torch type MXL 201, 3 m,

- TIG torch type SR-B 26 with accessories (1 electrode holder Ø 1.6-2.4-3.2 mm, + 1 diffuser 1.6-2.4-3.2 mm, + 1 long cap, 3 Gold tungsten electrodes of 1.6-2.4-3.2 mm), + 1 ceramic nozzle GR 6-7-8
- 1 cable length 3 m cross-section 25 mm² with electrode holder.
- 1 cable length 3 m cross-section 25 mm² with earth clamp.
- 4.5 m gas hose with quick connector,
- 2 reversible drive rolls for steel or stainless steel wire Ø 0.6/0.8 mm, and 0.8/1.0 mm (1 fitted on the machine)
- 2 contact tips 0.8 mm and 2 contact tips 1 mm

Available for order

ESAB

Reference: 0700600860

ESAB - Sentinel A60

(18 reviews)

3,560.86 kr

3 560,86 kr tax excl.

or 4 x 890,22 kr

Free delivery

2-year warranty

High-performance automatic welding helmet. Sentinel A60 was designed with enhanced vision in mind.
Viewing area 40% larger than A50 (118 x 71 mm) for a wider view of your work.
Its new ADF offers excellent 1/1/1/1 EN optics from all angles
Ultra-clear True-Color lenses to reduce eye fatigue
Shade range from 3/5 to 13 adjustable in half-unit digital increments to optimise vision
4 overactive arc detection sensors for automatic brightness recognition in any work environment
Bright two-colour LED display for easy viewing in low-light conditions
New graphics to adjust sensitivity and delay time
Buttons carefully spaced apart from each other, easy to use even with gloves
ADF with nine programmable memory slots to save and quickly access welding profiles
Esab Sentinel A60 features an external grinding mode button for easy activation
New shade lock function to bypass the ADF and keep the helmet in its darkest state.
2 replaceable CR2450 lithium batteries with solar support
Internal warning indicators for grinding mode, low battery and ADF bypass lock
The signature flip-front design of the Sentinel A60 with infinite adjustment distributes weight
around the head.
Switching time (light to dark): 0.04 ms; switching time (dark to light): 0.1–0.9 s, adjustable

Approvals: CE: EN175, EN379, EN166; ANSI Z87.1; CSA Z94.3; AS/NZS 1337.1, 1338.1; TP TC 019/2011; ISO 16321-1/2

3-year warranty (battery excluded)

DELIVERED COMPLETE WITH 2 AMBER REPLACEMENT EXTERNAL PROTECTION LENSES, 2 CLEAR EXTERNAL PROTECTION LENSES, 2 INTERNAL PROTECTION LENSES AND A PRACTICAL PROTECTIVE CARRY BAG.

ESAB - ROGUE ES 181i - MMA Inverter welding machine

Save 10%

Available for order

ESAB

Reference: 0705002008

ESAB - ROGUE ES 181i - MMA Inverter welding machine

(6 reviews)

3,921.43 kr

4,357.15 kr

3 921,43 kr tax excl.

or 4 x 980,36 kr

Free delivery

2-year warranty

Why choose the Rogue ESAB ES 181i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 170A @20%
Compact and powerful: 10–180A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height

Supplier stock

ESAB

Reference: 0559150004

ESAB Cutmaster 50+

26,954.09 kr

26 954,09 kr tax excl.

Free delivery

2-year warranty

The Cutmaster 50+ plasma cutter is the ideal combination of power and portability for portable plasma cutting machines.
Portable and durable with its three handles and a lightweight, industrial, weather-resistant enclosure. The bright 10.9 cm (4.3-inch) TFT LCD screen with a glove-compatible adjustment knob simplifies use and allows for increased control and flexibility.

Available for order

ESAB

Reference: 0705002011

ESAB - ROGUE ET 181i CE - TIG DC inverter welding machine

(3 reviews)

7,833.84 kr

7 833,84 kr tax excl.

Free delivery

2-year warranty

ESAB Rogue ET 181i Tig welding machine

Rogue ET181i is a DC HF-start TIG and MMA welding machine built with the latest inverter technologies to guarantee an extremely stable welding arc, ideal for working on steel, stainless steel, brass, cast iron...

The electronic boards of the Rogue ET181i are protected by a special coating that insulates them from moisture and dust (IP23S protection). The body is very robust and the dimensions are compact so that the operator can transport and use this welding machine in the workshop or on site even in adverse environmental conditions.

The Rogue ET181i can generate a maximum welding current of 180 A and has a duty cycle of 116 A at 60%; these characteristics make this welding machine ideal for installation, maintenance and light joinery work.

The control panel of the Rogue ET181i is easy to use and the practical LCD screen allows the operator to accurately view the welding parameters. From the control panel, it is possible to modify the TIG welding parameters to adapt the process to the needs the operator faces: LIFT or HF trigger mode, pre and post gas, initial and final current, up and down slope, 2T or 4T.

If you use the Rogue ET181i in MMA mode for MMA welding (electrode holder optional), it is possible to select the percentage of Arc-Force and hot start that best suits the welder's operating style; furthermore, from the control panel, it is possible to select the welding mode for CELLULOSE-coated electrodes.

The Rogue ET 181i comes with:

- Instruction manual
- Shoulder strap for transport
- ESAB SR26 TIG torch 4 metres with a grey Cerium tungsten electrode Ø 2.4 mm)
- Ground cable 16mm2 cross-section - length 3 m
- Gas hose with quick connector

This machine replaces the ESAB ROGUE ET180i model and additionally features the PULSE function compared to that previous model.

The Pulse function of the Rogue allows welders to better control heat input and arc stability. The controlled pulse action helps create a stable arc, avoiding excessive spatter and minimizing the risk of weld defects or the need for post-weld cleaning. Rogue's Pulse technology facilitates penetration and fusion in the welding process, which is essential for creating strong and durable weld beads and for ensuring the structural integrity of fabricated components. Pulse technology helps minimize the heat-affected zone, thereby reducing the likelihood of material distortion or unintended metallurgical changes.

Supplier stock

ESAB

Reference: 0559170004

ESAB Cutmaster 70+

32,074.43 kr

32 074,43 kr tax excl.

Free delivery

2-year warranty

The Cutmaster 70+ plasma cutter is the ideal combination of power and portability for portable plasma cutting machines. Portable and durable with its three handles and a lightweight, industrial, weather-resistant enclosure. The bright 10.9 cm (4.3-inch) TFT LCD screen with a glove-compatible adjustment knob simplifies use and allows for increased control and flexibility.

ESAB | Multi-process welder ROGUE EMP 210 PRO

Save 10%

Available for order

ESAB

Reference: 0700301092

ESAB | Multi-process welder ROGUE EMP 210 PRO

(6 reviews)

13,467.98 kr

14,964.42 kr

13 467,98 kr tax excl.

Free delivery

2-year warranty

The ESAB Rogue EMP 210 PRO is a multi-process INVERTER technology welding machine designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system offers industrial-level arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics to suit the material being welded.
Weighing only 16.7 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.
True multi-process unit with Synergic MIG, Manual MIG, MIG brazing, flux-cored, Lift TIG and MMA (including 6010) processes
The 5.0" TFT screen is intuitive and clear, allowing the welder easy adjustment and a quick learning curve.
Synergic welding programs: complete range of welding parameters, 0.5 to 10.0 mm with a single control knob
Power Factor Correction (PFC): ensures a stable arc, resistant to mains voltage fluctuations, even when working with long extension cords up to 100 m
Unique robust industrial design: multiple handles for easy handling and cable management
Arc dynamics: precise adjustment of arc characteristics for a crisp / stable arc for carbon steel or a fluid / soft arc for stainless steel
Jobs: ability to save / recall up to 10 operations
Compliant with IP23S standard for indoor / outdoor use

Applications
Automotive construction
Automotive bodywork
Agricultural equipment
Civil engineering
Mechanical contractors
Repair and maintenance
Light fabrication

Package contents:
1 Multi-process welding machine 210 A with 3 m power cable and 16 A plug
1 MIG torch MXL 201, 3 m with Euro connector, with 1 contact tip for steel or stainless steel wire Ø 0.8 mm
1 Ground clamp with 3 m cable, OKC 35-50 16 mm2.
1 Electrode holder, Handy 200 A, heavy-duty 50 mm OKC, with 3 m cable.
1 Gas hose 4.5 m with quick connector.
1 Ø 200 mm spool of ESAB OK AristoRod steel wire 0.8 mm, weight 1 kg
1 Feed roller 0.6 / 0.8 mm (fitted on the machine) + 1 roller 0.8 / 1 mm for steel or stainless steel wire.
1 roller 0.8 / 0.9 mm for flux-cored wire
1 roller 1 / 1.2 mm for aluminum wire
1 nozzle for flux-cored wire (gasless) + 1 contact tip Ø 0.8 mm and 1 contact tip Ø 0.9 mm
1 user manual and safety instructions.

Available for order

ESAB

Reference: 0705002010

ESAB - ROGUE ET 201i PRO CE - TIG DC inverter welding machine

(3 reviews)

9,817.05 kr

9 817,05 kr tax excl.

Free delivery

2-year warranty

Rogue ET 201i PRO TIG welder

Rogue ET180i is a TIG welder with HF ignition in direct current (DC) and MMA, built with the latest inverter technologies to guarantee an extremely stable welding arc, ideal for working on iron, stainless steel, brass, cast iron...

The electronic boards of the Rogue ET 201i PRO are protected by a special coating that insulates them from moisture and dust (IP23S protection). The body is very robust and the dimensions are compact, allowing the operator to transport and use this welding machine in the workshop or on-site even in adverse environmental conditions.

The Rogue ET201i PRO can generate a maximum welding current of 200A and has a duty cycle of 129 A at 60%; these characteristics make this welding machine ideal for installation, maintenance and light carpentry work.

The control panel of the Rogue ET201i PRO is easy to use and the convenient LCD screen allows the operator to accurately view the welding parameters. From the control panel, it is possible to modify the TIG welding parameters to adapt the process to the operator's needs: LIFT or HF trigger mode, pre and post gas, initial and final current, up and down slope, 2T or 4T.

If you use the Rogue ET201i PRO in MMA mode for MMA welding (electrode holder optional), it is possible to select the Arc-Force and hot start percentages that best suit the welder's operating style; furthermore, from the control panel, it is possible to select the welding mode for electrodes with CELLULOSE coating.

The Rogue ET 201i is delivered with:

- Instruction manual
- Shoulder strap for transport
- ESAB SR26 TIG torch, 4 meters, with a grey Cerium tungsten electrode Ø 2.4 mm)
- Ground cable cross-section 16mm2 – length 3 m
- Gas hose with quick connector

This unit replaces the ESAB ROGUE ET200i PRO model and additionally features the PULSE function compared to the previous model.

The Rogue's Pulse function allows welders to better control heat input and arc stability. The controlled pulse action helps create a stable arc, avoiding excessive spatter and minimizing the risk of weld defects or the need for post-weld cleaning. The Rogue's Pulse technology facilitates penetration and fusion in the welding process, which is essential for creating strong and durable weld beads and for ensuring the structural integrity of fabricated components. Pulse technology helps minimize the heat-affected zone, thereby reducing the likelihood of material distortion or unintended metallurgical changes.

Supplier stock

ESAB

Reference: 0700300985

ESAB - REBEL EMP215ic | Multi-process inverter welder

21,590.25 kr

21 590,25 kr tax excl.

Free delivery

2-year warranty

This multi-process unit allows you to weld: MIG-MAG including flux-cored wire, MMA, and DC TIG

The sMIG ("smart MIG") function allows the system to "learn" and constantly adapt to the operator's welding technique to deliver a stable, reproducible arc

The innovative user interface with large TFT screen offers a clear view of welding parameters and settings

Unique industrial design with five-handle protection cage and monobloc steel structure housed in a light and highly mobile unit; full three-year warranty

Supplied ready to weld with the following consumables and accessories:

• ESAB MXL 200 MIG torch, 3 m
• M6 contact tip for 0.8 mm wire (qty 2)
• M6 contact tip for 1.0 mm wire (qty 2)
• Gas hose, 4.5 m, quick connector
• Electrode holder + 3 m cable
• Earth clamp + 3 m cable
• Steel wire spool Ø0.8 mm weighing 5 kg
• Reversible drive roll for 0.6/0.8 mm steel wire (installed in the drive system)
• Reversible drive roll for 0.8/1.0 mm steel wire
• 0.6 mm – 0.8 mm wire liner (installed in the MIG torch)
• 3 m power cable, fitted with plug
• Safety manual
• USB user manual

Optional: SR17 TIG torch

Supplier stock

ESAB

Reference: 0700600868

A60 air welding helmet headband

420.81 kr

420,81 kr tax excl.

or 4 x 105,20 kr

Free delivery

2-year warranty

A60 air welding helmet headband

ESAB - Multi-Process Three-Phase Welder Rustler EM 350C PRO Synergic

Save 10%

Supplier stock

ESAB

Reference: 0448350992

ESAB - Multi-Process Three-Phase Welder Rustler EM 350C PRO Synergic

25,264.70 kr

28,071.88 kr

25 264,70 kr tax excl.

Free delivery

2-year warranty

High duty cycle: 200A at 100%
Multi-process: MIG with/without gas and MMA
Designed for performance and precision
4-roller wire feed system
Wire diameter: 0.6-1.2mm / 0.8-1.2mm
Compact and mobile design with integrated wheels and cylinder support
Lighter and more practical torch
Robust enclosure compliant with IP23 standard
Perfect for welding aluminum, stainless steel, bronze and mild steel
Three-phase - 400V
Weight 61kg - Dimensions 977 x 487x 800 mm

Ideal for fabrication, maintenance, repair, construction and production welding

ESAB - ROGUE ES 181iP PRO - MMA Inverter welding machine

Save 10%

Available for order

ESAB

Reference: 0705002007

ESAB - ROGUE ES 181iP PRO - MMA Inverter welding machine

(4 reviews)

4,949.06 kr

5,498.95 kr

4 949,06 kr tax excl.

Free delivery

2-year warranty

Why choose the Rogue ESAB ES 181iP Pro?
For experienced welders seeking power
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 116A@60% and 180A @25%
Compact and powerful: 10–180A single-phase (230V)
3-meter cable for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, and Cast Iron electrodes in direct current
Generator compatible – IP23S
Ideal for maintenance services and agriculture
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable, 3 m length – 13 mm connector
1 ground clamp + 16 mm² cable, 3 m length – 13 mm connector
1 shoulder strap for carrying the unit when working at height

ESAB - ROGUE ES 201iP PRO - MMA Inverter welding machine

Save 10%

Available for order

ESAB

Reference: 0705002009

ESAB - ROGUE ES 201iP PRO - MMA Inverter welding machine

(10 reviews)

6,265.26 kr

6,961.39 kr

6 265,26 kr tax excl.

Free delivery

2-year warranty

Why choose the ESAB Rogue ES 201IP Pro?
Two welding processes: MMA / Lift TIG
Duty cycle: 129A@60% and 200A @25%
Robust and powerful: 10–200A single-phase (230V)
3 m cables for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes on DC
Generator compatible - IP23S
Ideal for craftsmen and advanced DIY enthusiasts
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable, length 3 m - 13 mm connector
1 ground clamp + 16 mm² cable, length 3 m - 13 mm connector
1 shoulder strap for carrying the unit when working at height

Supplier stock

ESAB

Reference: 0447700881

ESAB - RENEGADE ES210i | - Inverter MMA welding machine

9,871.13 kr

9 871,13 kr tax excl.

Free delivery

2-year warranty

Why choose the ESAB Renegade ES 210i?
Delivers maximum welding power for a single-phase unit
Welds 6010 cellulosic electrodes in addition to Rutile, Basic, Stainless, and Cast Iron electrodes
Duty cycle: 210A@25% and 135A @60%
Two welding processes: MMA / Lift TIG
Compact and powerful: 10–210A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 4 mm
Generator compatible – IP23S
Ideal for shipbuilding, pipe manufacturing and industry
3-year warranty

Supplied with:
1 electrode holder + 25 mm² cable, 3 m length – 13 mm connector
1 earth clamp + 25 mm² cable, 3 m length – 13 mm connector
1 strap allowing the unit to be carried over the shoulder when working at height + anchor points for lifting.

Available for order

ESAB

Reference: 0700026291

ESAB - button torch EXEOR SR21 8M

3,959.27 kr

3 959,27 kr tax excl.

or 4 x 989,82 kr

Free delivery

2-year warranty

ESAB - button torch EXEOR SR21 8M notably compatible with the ESAB Rogue ET 230 and Renegade ET 210 welding machines

Available for order

ESAB

Reference: 46592535Z0

ESAB OK GoldRox 1kg Ø 2.5mm 6013 Rutile electrodes

198.29 kr

198,29 kr tax excl.

or 3 x 66,10 kr

Free delivery

2-year warranty

ESAB OK GoldRox 6013 – Rutile electrodes Ø 2.5 X L350 mm – 1 kg
Contains approximately: 55 electrodes
Reliability and performance for versatile use.

Why choose OK GoldRox?

- Ultra-easy arc striking, even with low-voltage machines
- Stable and consistent arc for a quality weld bead
- Low spatter = less cleanup
- Easy slag removal for immediate time savings
- All-position use (flat, vertical, overhead)

Available for order

ESAB

Reference: 0700301091

ESAB | ROGUE EM 180 Multi-Process Welder

(3 reviews)

11,439.70 kr

11 439,70 kr tax excl.

Free delivery

2-year warranty

The ESAB Rogue EMP 180 is a multi-process welding machine with INVERTER technology, designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system delivers industrial-grade arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics according to the material being welded.
Weighing only 16.2 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.

Its features

Large 14-segment display – instant readout of voltage and wire feed speed for clear visibility
- Synergic welding programs: easy adjustment of welding parameters for welds on material thicknesses from 0.5 to 8.0 mm
- Power Factor Correction (PFC) – ensures a stable arc, resistant to power fluctuations even when working with extension cables up to 100 m
- Unique robust industrial design with multiple lifting points and optimised cable management
- Arc Dynamics: Allows precise adjustment of arc characteristics to achieve a hard arc for carbon steel or a soft arc for stainless steel.
- Provision for torch with integrated spool; Rogue automatically configures when the torch is connected.
- IP23S protection rating for ideal use on job sites.

The Esab Rogue EM 180 comes with:

- 1 power cable 3 metres with Schuko 16 A plug,

- 1 MIG torch MXL 201 Euro 3 m,

- 1 earth cable kit 16 mm², 3 m,

- 1 gas hose with quick connector 4.5 m,

- 1 ESAB OK AristoRod mild steel/iron welding wire spool 12.50 0.8 mm 1 kg,

- 1 drive rollers 0.6/0.8 mm V (fitted), 0.8/1.0 mm V and 0.8/0.9 mm VK x flux-cored wire,

- safety instructions.

Available for order

ESAB

Reference: 46593235Z0

ESAB OK GoldRox 1kg Ø 3.2mm 6013 Rutile electrodes

179.90 kr

179,90 kr tax excl.

or 3 x 59,97 kr

Free delivery

2-year warranty

ESAB OK GoldRox 6013 – Rutile electrodes Ø 3.2 X L350 mm – 1 kg
Contains approximately: 34 electrodes
Reliability and performance for versatile use.

Why choose OK GoldRox?

- Ultra-easy arc striking, even with low-voltage machines
- Stable and consistent arc for a quality weld bead
- Low spatter = less cleanup
- Easy slag removal for immediate time savings
- All-position use (flat, vertical, overhead)

Available for order

ESAB

Reference: 46594035Z0

ESAB OK GoldRox 1kg Ø 4.0mm 6013 Rutile electrodes

179.90 kr

179,90 kr tax excl.

or 3 x 59,97 kr

Free delivery

2-year warranty

ESAB OK GoldRox 6013 – Rutile electrodes Ø 4.0 X 350mm – 1 kg
Contains approximately: 23 electrodes
Reliability and performance for versatile use.

Why choose OK GoldRox?

- Ultra-easy arc striking, even with low-voltage machines
- Stable and consistent arc for a quality weld bead
- Low spatter = less cleanup
- Easy slag removal for immediate time savings
- All-position use (flat, vertical, overhead)

Available for order

ESAB

Reference: 46592025Z0

ESAB OK GoldRox 1kg Ø 2.0mm 6013 Rutile Electrodes

(1 review)

189.31 kr

189,31 kr tax excl.

or 3 x 63,10 kr

Free delivery

2-year warranty

ESAB OK GoldRox 6013 – Rutile Electrodes Ø 2.0 mm X L 300mm – 1 kg
Contains approximately: 230 electrodes
Reliability and performance for versatile use.

Why choose OK GoldRox?

- Ultra-easy arc striking, even with low-voltage machines
- Stable and consistent arc for a quality weld bead
- Low spatter = less cleaning
- Easy slag removal for immediate time savings
- All-position use (flat, vertical, overhead)

Available for order

ESAB

Reference: 4659323510

Esab 6013 OK GoldRox Rutile electrodes Ø3.2mm 2.3kg

(1 review)

359.69 kr

359,69 kr tax excl.

or 4 x 89,92 kr

Free delivery

2-year warranty

ESAB OK GoldRox 6013 – Rutile electrodes Ø 3.2 mm – 2.3 kg
Contains approximately: 80 electrodes
Reliability and performance for versatile use.

Why choose OK GoldRox?

- Ultra-easy arc striking, even with low-voltage machines
- Stable and consistent arc for a quality weld bead
- Low spatter = less cleanup
- Easy slag removal for immediate time savings
- All-position use (flat, vertical, overhead)

Available for order

ESAB

Reference: 4659253510

Esab 6013 OK GoldRox Rutile electrodes Ø2.5mm 2.5kg

369.64 kr

369,64 kr tax excl.

or 4 x 92,41 kr

Free delivery

2-year warranty

ESAB OK GoldRox 6013 – Rutile electrodes Ø 2.5 mm – 2.5 kg
Contains approximately: 140 electrodes
Reliability and performance for versatile use.

Why choose OK GoldRox?

- Ultra-easy arc striking, even with low-voltage machines
- Stable and consistent arc for a quality weld bead
- Low spatter = less cleanup
- Easy slag removal for immediate time savings
- All-position use (flat, vertical, overhead)

Supplier stock

ESAB

Reference: 0447750890

ESAB - RENEGADE ET 210i PRO Advanced | - TIG Inverter Welding Machine

18,519.87 kr

18 519,87 kr tax excl.

Free delivery

2-year warranty

This ESAB Renegade ET 210Ip Advanced is a single-phase professional TIG welding machine with high-frequency ignition and MMA, with IP23 protection rating, capable of being used even in the most demanding environments.

Thanks to its low weight, the various lifting points provided on the outer body and the high-quality shoulder strap, the Renegade ET 210Ip Advanced can be transported easily.

Renegade ET 210Ip Advanced is equipped with an integrated active PFC circuit that allows it to be used even on a low-power network or if an extension cord is used (length up to 100 m).

Easy to use. It offers direct access to parameter settings and features a
simple and intuitive user interface that allows you to read the parameters, even from a distance.

It allows MMA welding of rutile, basic, stainless steel, cast iron... and also cellulosic electrodes.

Technical specifications:

- High robustness with IP23 protection rating, for use in workshops and on job sites, in demanding environments

- Pulsed TIG up to 999 Hz to increase control of heat input and weld pool

- Integrated PFC circuit for a stable arc even with an extra-long power cable, up to 100 m

- Intuitive panel, quick to configure, for greater precision and reduced downtime

- Dual functionality - Current mode trigger to switch between two output current levels to control
heat input and weld pool size

- 4.3-inch color screen with visual display of settings

- Easy access to up to 10 personal programs via the flashlight button

- Modular system to connect the cooling unit (optional) and the cart (optional)
without tools

Examples of application sectors
Shipbuilding and offshore
Civil construction
Pipe manufacturing
Repair and maintenance
Heavy fabrication
Industrial and general manufacturing
Mining
Steel formwork

Supplied with:
1 ground clamp + cable 25 mm² length 3 m - 13 mm connector
1 strap for carrying the unit on the shoulder when working at height + anchor points for lifting.
1 TIG torch SR 17 length 4 m
1 gas hose length 4 m

Electrode holder optional

Supplier stock

ESAB

Reference: 8350404020

ESAB OK Weartrode 50 Hardfacing Electrodes 4mm X L450mm 4.6kg

937.57 kr

937,57 kr tax excl.

or 4 x 234,39 kr

Free delivery

2-year warranty

ESAB OK Weartrode 55
Diameter: 4 mm
Package weight: 4.6 kg
Number of electrodes: 56 pieces

Key characteristics
Basic coating: Stable arc and precise deposit control.
Deposit hardness: 50–60 HRC – for heavily stressed surfaces.
Chemical composition: Cr 5.6%, Mn 1.4%, Si 1.2%, C 0.6%, W <1%
Standard: PN-EN 14700: E Z Fe3

Supplier stock

ESAB

Reference: 8350504020

ESAB OK Weartrode 50 Hardfacing Electrodes 5mm X L450mm 4.7kg

1,041.20 kr

1 041,20 kr tax excl.

or 4 x 260,30 kr

Free delivery

2-year warranty

ESAB OK Weartrode 55 Diameter: 5 mm Package weight: 4.7 kg Number of electrodes: 36 pieces

Key features Basic coating: Stable arc and precise deposit control. Deposit hardness: 50–60 HRC – for heavily stressed surfaces. Chemical composition: Cr 5.6%, Mn 1.4%, Si 1.2%, C 0.6%, W <1% Standard: PN-EN 14700: E Z Fe3

Supplier stock

ESAB

Reference: 0700600875

Magnifying lens for ESAB welding helmet

80.27 kr

80,27 kr tax excl.

Fast delivery

2-year warranty

1 ESAB 2.5 magnifying lens adapted for ESAB A60 welding helmets

Available for order

ESAB

Reference: 8350323030

ESAB OK Weartrode 50 Hardfacing Electrodes 3.2mm X L350mm 1.8kg

369.64 kr

369,64 kr tax excl.

or 4 x 92,41 kr

Free delivery

2-year warranty

ESAB OK Weartrode 55 Diameter: 3.2 mm Package weight: 1.8 kg Number of electrodes: 43 pieces

Key features Basic coating: Stable arc and precise deposit control. Deposit hardness: 50–60 HRC – for heavily stressed surfaces. Chemical composition: Cr 5.6%, Mn 1.4%, Si 1.2%, C 0.6%, W <1% Standard: PN-EN 14700: E Z Fe3

Supplier stock

ESAB

Reference: 0700500904

Replacement battery for EPXR A60 ESAB welding helmet

793.26 kr

793,26 kr tax excl.

or 4 x 198,32 kr

Free delivery

2-year warranty

Replacement battery for EPXR A60 ESAB welding helmet

Supplier stock

ESAB

Reference: 0479100401

ESAB | ROGUE ET230iP AC/DC with cooling unit

(1 review)

39,619.76 kr

39 619,76 kr tax excl.

Free delivery

2-year warranty

The Rogue ET 230iP AC/DC is a professional, portable, high-quality AC/DC TIG welding machine designed to excel in the daily welding of aluminium, stainless steel and carbon steel.

The intuitive graphical interface with a 5-inch color screen offers new features for quick and easy adjustments. The machine can handle a wide range of material thicknesses, including very thin sheets.

The selectable waveforms (square, soft square, sinusoidal, triangle) allow optimized heat input for high penetration on thicker materials and low distortion on thin sheets. The pulsed DC TIG and AC TIG capabilities provide better control of the weld pool, allowing the welder to further customize the arc for multiple applications. TIG arc starts are designed to optimize performance based on the selected tungsten electrode diameter and type.

The durable enclosure design combines strength and functionality with multiple lifting points for easy handling in the workshop and on-site.

Its key features:

- Different AC/DC waveforms (square - sinusoidal - triangle) for optimal energy transfer.
- Pulsed in AC TIG AND DC TIG up to 200 Hz for better control of heat input and the weld pool
- The integrated PFC circuit allows a stable arc, even with extremely long power cables, up to 100 m
- New CoolMini 3 water cooling unit for lightweight TIG torches
An intuitive and highly visible interface with a 5-inch color screen reduces downtime and improves precision.
- The dual current mode switches between two output current levels to control heat input and weld pool size.
- Easy access via the flashlight button to saved jobs
- Modular system with tool-free connection to the trolley.
- New Exeor TIG torch included.

Delivered with:
A ground cable 3 m long
An Exeor SR21 TIG torch 4 m long
A gas hose 4 m long
A CoolMini 3 cooling unit

Supplier stock

ESAB

Reference: 0700500950

ESAB - SAVAGE A50 LUX

(1 review)

3,380.53 kr

3 380,53 kr tax excl.

or 4 x 845,13 kr

Free delivery

2-year warranty

The Savage A50 LUX welding helmet adopts the proven performance of the Sentinel A60 welding helmet to deliver True-Color OpTCS rendering at an impeccable EN 1/1/1/1 optical level.
The optoelectronic cell features a simple and intuitive control panel that allows the most critical functions related to all welding types to be controlled: wide shade selection; 5 delay and sensitivity levels.
To complete the versatility of the Savage A50 LUX, a dual 50-lumen LED light is integrated behind the protective lens. The light is powered by its own "AA" battery for a long service life thanks to the integrated arc sensor, which only turns off the lamp when an arc or intense light is detected.
The 5-point adjustable Halo headband of the Savage A50 LUX is the same as the one on the Sentinel A60.

Advanced LED lighting with dedicated arc sensor and
power supply
Easily accessible LED work light power button and separate external grinding button
Optoelectronic cell viewing area: 100 x 60 mm with internally adjustable push-button controls
Shade range: DIN 3/5 – 13
ESAB True-Color OpTCS visor technology
Arc sensors: 4
Fast switching time of 0.07 milliseconds
Replaceable CR2450 battery
Low battery and grinding mode LED indicators

Welding processes
- Oxyfuel cutting
- Plasma cutting
- Grinding
- Welding, GMAW (MIG/MAG)
- Welding, GTAW (TIG)
- Welding, PAW (Plasma welding)
- Welding, SMAW/MMA (coated electrode)

The delivery includes: a complete helmet, 2 replacement inner lenses, 4 replacement outer protective lenses, a carrying bag and a safety
manual.

Supplier stock

ESAB

Reference: 0447700911

ESAB - RENEGADE ET 210i PRO | - TIG Inverter welding machine

16,812.52 kr

16 812,52 kr tax excl.

Free delivery

2-year warranty

This ESAB Renegade ET 210iP is a single-phase professional TIG welding machine with high-frequency ignition and MMA, with protection rating IP23, capable of being used even in the most demanding environments.

Thanks to its low weight, the various lifting points provided on the outer body and the high-quality shoulder strap, the Renegade ET 210Ip Advanced can be transported easily.

Renegade ET 210iP is equipped with an integrated active PFC circuit that allows it to be used even on a low-power network or when an extension cord is used (length up to 100 m).

Easy to use. It offers direct access to parameter settings and features a
simple and intuitive user interface that allows you to read the parameters, even from a distance.

It allows MMA welding of rutile, basic, stainless steel, cast iron electrodes... and also cellulosic .

Technical specifications:

- High robustness with IP23 protection rating, for use in workshop and on job sites, in demanding environments

- Pulsed TIG up to 999 Hz to increase control of heat input and weld pool

- Integrated PFC circuit for a stable arc even with an extra long power cable, up to 100 m

- Intuitive and quick-to-configure panel, for greater precision and reduced downtime

- Dual functionality - Current mode trigger to switch between two output current levels to control
heat input and weld pool size

- Modular system to connect the cooling unit (optional) and the trolley (optional)
without tools

Examples of application sectors
Shipbuilding and offshore
Civil construction
Pipe fabrication
Repair and maintenance
Heavy fabrication
Industrial and general manufacturing
Mining
Steel formwork

Delivered with:
1 ground clamp + 25 mm² cable 3 m long - 13 mm connector
1 strap for carrying the unit over the shoulder when working at height + anchor points for lifting.
1 TIG torch SR-B 26 4 m long
1 gas hose 4 m long

Electrode holder optional

Supplier stock

ESAB

Reference: 0479100400

ESAB | ROGUE ET230iP AC/DC

30,235.42 kr

30 235,42 kr tax excl.

Free delivery

2-year warranty

The Rogue ET 230iP AC/DC is a professional, portable, and high-quality AC/DC TIG welding machine designed to excel in daily welding of aluminum, stainless steel, and carbon steel.

The intuitive graphical interface with a 5-inch color screen offers new features for quick and easy settings. The machine can handle a wide range of material thicknesses, including very thin sheet metal.

Selectable waveforms (square, soft square, sinusoidal, triangle) allow optimized heat input for high penetration on thicker materials and low distortion on thin sheet metal. DC TIG and AC TIG pulsed capabilities offer better control of the weld pool, allowing the welder to further customize the arc for multiple applications. TIG arc starts are designed to optimize performance based on the selected tungsten electrode diameter and type.

The durable enclosure design combines strength and functionality with multiple lifting points for easy handling in the workshop and in the field.

Its key features:

- Different AC/DC waveforms (square – sinusoidal – triangle) for optimal energy transfer.
- Pulsed in AC TIG AND DC TIG up to 200 Hz for better control of heat input and the weld pool
- The integrated PFC circuit ensures a stable arc even with extremely long power supply cables, up to 100 m
- New CoolMini 3 water cooling unit for lightweight TIG torches (not included in this version of the machine).
An intuitive, highly visible interface with a 5-inch color screen reduces downtime and improves precision.
- Dual current mode switches between two output current levels to control heat input and weld pool size.
- Easy access via the flashlight button to saved jobs
- Modular system with tool-free connection to the trolley.
- New Exeor TIG torch included.

Included with:
A 3 m ground cable
An Exeor SR17 air-cooled TIG torch, 4 m long
A 4 m gas hose

ESAB - RENEGADE ET 210i PRO Advanced | - TIG Inverter welding machine cooled

Save 10%

Available for order

ESAB

Reference: 0447750891

ESAB - RENEGADE ET 210i PRO Advanced | - TIG Inverter welding machine cooled

24,826.58 kr

27,585.09 kr

24 826,58 kr tax excl.

Free delivery

2-year warranty

This ESAB Renegade ET 210Ip Advanced is a single-phase professional TIG welding machine with high-frequency ignition and MMA, with protection rating IP23, capable of being used even in the most demanding environments.

Thanks to its low weight, the various lifting points provided on the outer body and the high-quality shoulder strap, the Renegade ET 210Ip Advanced can be transported easily.

Renegade ET 210Ip Advanced is equipped with an integrated active PFC circuit that allows it to be used even on a low-power network or when an extension cord is used (length up to 100 m).

Easy to use. It offers direct access to parameter settings and features a
simple and intuitive user interface that allows you to read the parameters, even from a distance.

It allows MMA welding of rutile, basic, stainless steel, cast iron electrodes... and also cellulosic .

Technical specifications:

- High robustness with IP23 protection rating, for use in workshop and on job sites, in demanding environments

- Pulsed TIG up to 999 Hz to increase control of heat input and weld pool

- Integrated PFC circuit for a stable arc even with an extra long power cable, up to 100 m

- Intuitive and quick-to-configure panel, for greater precision and reduced downtime

- Dual functionality - Current mode trigger to switch between two output current levels to control
heat input and weld pool size

- 4.3-inch color screen with visual display of settings

- Easy access to up to 10 personal programs via the flashlight button

- Modular system to connect the cooling unit (optional) and the trolley (optional)
without tools

Examples of application sectors
Shipbuilding and offshore
Civil construction
Pipe fabrication
Repair and maintenance
Heavy fabrication
Industrial and general manufacturing
Mining
Steel formwork

Delivered with:
1 cooling unit EC 1001
1 ground clamp + 25 mm² cable 3 m long - 13 mm connector
1 strap for carrying the unit over the shoulder when working at height + anchor points for lifting.
1 TIG torch Exeor SR 21 4 m long
1 gas hose 4 m long

Electrode holder optional

Available for order

ESAB

Reference: 0700600861 + 0700500920

ESAB | SENTINEL A60 AIR Powered Air Purifying Respirator

(8 reviews)

8,600.06 kr

8 600,06 kr tax excl.

Free delivery

2-year warranty

The Sentinel A60 Air welding helmet builds on the innovations of the standard Sentinel A60, taking welding to the next level. A wide panoramic view and excellent 1/1/1/1 EN optics provide an even wider view of the weld pool without any distortion.

The redesigned auto-darkening filter (ADF) features the new light control technology
with broad-spectrum OpTCS ™ from ESAB. This offers an enhanced True Color vision mode, for less eye fatigue as the working day becomes more demanding. New shade adjustment settings in 0.5 increments allow more precise vision control.

The outer shell retains Sentinel's signature design and integrates a new air diffuser screen.
The fully adjustable Halo ™ internal headband and the external grinding mode button complete the most comfortable and highest-performing lenses ever produced by ESAB.

- ADF viewing area : 118 x 71 mm (4.65 x 2.80 inches)
and intuitive ADF controls, including sensitivity and delay
- Light state range: DIN 3 / 5 – 13, adjustable in 0.5 increments and ADF with adjustable setting
- ESAB OpTCS technology with True Color Lenses
- 9 programmable memory slots
- Arc sensors: 4
- Fast switching time of 0.08 milliseconds - Battery CR2450 replaceable
- Low battery LED, grinding mode LED grinding and shade lock LED

The EPR-X1 respiratory system allows you to adjust the airflow with a simple press of a button, enabling adjustment of the flow through the P3 filter from 170 to 220 litres per minute . The system informs the user of the need to replace the filter by emitting an audible signal. The lithium-ion battery lasts up to 10 hours at 170 l/min.

The ESAB EPR-X1 PAPR unit seamlessly connects to all current ESAB PAPR welding helmets and provides advanced respiratory protection against harmful welding fume particles.

This PAPR is designed for applications ranging from occasional use to full-time industrial applications. The EPR-X1 has a robust and compact structure with a powerful fan to ensure maximum lifespan and performance. Check the battery status, fan settings and filter conditions at a glance thanks to the quick-access LED status indicators. In addition, the PAPR provides audible and vibrating alerts to inform the welder of low airflow (indicating the need to replace the filter) and low battery conditions.

The EPR-X1 turbo unit is controlled by easily accessible buttons with which three airflow speed ranges can be set: 170/190/220 l/minute. The spark arrestor and the two-stage EN12941 TH-3P certified HEPA filter are easily accessible through a removable front door.

DELIVERED COMPLETE WITH 2 AMBER REPLACEMENT EXTERNAL PROTECTION LENSES, 2 CLEAR EXTERNAL PROTECTION LENSES, 2 INTERNAL PROTECTION LENSES AND A PRACTICAL PROTECTIVE CARRYING BAG.

Supplier stock

ESAB

Reference: 0459052003

2 ESAB rollers D1/1.2

369.64 kr

369,64 kr tax excl.

or 4 x 92,41 kr

Free delivery

2-year warranty

2 ESAB rollers D1/1.2

ESAB - ROGUE ES 151i - MMA Inverter Welder

Save 10%

Available for order

ESAB

Reference: 0705002006

ESAB - ROGUE ES 151i - MMA Inverter Welder

(1 review)

3,470.66 kr

3,856.29 kr

3 470,66 kr tax excl.

or 4 x 867,67 kr

Duty cycle 97A @25%
MMA/ Lift TIG
IP23S

Free delivery

2-year warranty

Why choose the Rogue ESAB ES 151i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 150A @25%
Compact and powerful: 10–150A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 3.2 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height

Save 10%

Supplier stock

ESAB

Reference: 0447800881

ESAB - Renegade VOLT ES 200

34,661.61 kr

38,512.90 kr

34 661,61 kr tax excl.

Free delivery

2-year warranty

Key features:
200 A output on mains power (230 V)
Up to 140 A output on battery
Includes (4) DeWALT FlexVOLT 18 V/54 V 12 Ah batteries
AMP+ hybrid mode for increased power
Lightweight and portable battery-powered welder
Durable, impact-resistant housing
Intuitive user interface, readable even in direct sunlight
Memory storage for welding parameters

Supplier stock

ESAB

Reference: 0700500250

ESAB - ROGUE ES 250i THREE-PHASE + Cellulosic

14,378.54 kr

14 378,54 kr tax excl.

Free delivery

2-year warranty

MMA and TIG welding
Special 6010 mode for controlling cellulosic electrodes
Maximum power: 250A at 40%
Welding current 10-250 A
Power supply 400 V three-phase
Open circuit voltage 81 VDC
Protection class: IP23S
Dimensions: 477 x 188 x 360 mm

Supplied with 3m ground cable, 3m electrode holder and 2.5m power cable (without plug)

Save 10%

Supplier stock

ESAB

Reference: 0447100881

ESAB - Fabricator ES 410iC CE

21,581.31 kr

23,979.23 kr

21 581,31 kr tax excl.

Free delivery

2-year warranty

MMA and TIG welding + DC gouging
Maximum power: 400A at 60% and 310 A at 100%
Welding current 10-410 A
Power supply 400 V three-phase
Protection class: IP23S
Dimensions: 525 x 280 x 475 mm - Weight 35kg

ESAB for welding – ESAB France | Superior quality equipment at competitive prices