Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- -40%
- Out of stock
Sanding belt 100x1000 mm grit 60
Reference: DEST3239936
Sanding belt 100x1000 mm grit 60
36.38 kr
21.83 kr
21,83 kr tax excl.
Out of stock
Sanding belt 100x1000 mm grit 60
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Save 10%
In stock
Gys
Reference: 083622
1,229.06 kr
1,365.62 kr
1 229,06 kr tax excl.
or 4 x 307,27 kr
Free delivery
2-year warranty
Ideal for getting started with MMA welding
Duty cycle: 50A at 60% and 35A at 100%
Current range: 10 to 100A
Welds steel, cast iron and stainless steel up to 5mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 2.5 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 63 V
Featherlight: 2kg - 2-year warranty
Supplied with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap
Save 10%
In stock
Telwin
Reference: 816208
16,744.18 kr
18,604.65 kr
16 744,18 kr tax excl.
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) steel, stainless steel, copper, nickel ...including aluminium .
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High frequency CONTACTLESS ignition
TIG 2T/4T (manual or automatic welding)
TIG SPOT allows tacking of parts before welding.
HOT START adjustable: additional starting power for electrodes that are difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor according to the current intensity and the welding duration.
VRD: Improves safety during welding operations in damp environments
It also features the PULSE function particularly suited for welding thin plates where low heat input to the workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision improves as well.
It also features the EASY PULSE system allowing immediate pulsed mode welding even if the welder is not familiar with TIG welding, thanks to automatic parameter adjustment
THINSPOT function, enabling fast and precise spot welding.
For gas connection of the machine, it is recommended to use fitting 804208.
Save 10%
In stock
ESAB
Reference: 0705002009
(10 reviews)
6,327.38 kr
7,030.42 kr
6 327,38 kr tax excl.
Free delivery
2-year warranty
Why choose the ESAB Rogue ES 201IP Pro?
Two welding processes: MMA / Lift TIG
Duty cycle: 129A@60% and 200A @25%
Robust and powerful: 10–200A single-phase (230V)
3 m cables for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes on DC
Generator compatible - IP23S
Ideal for craftsmen and advanced DIY enthusiasts
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable, length 3 m - 13 mm connector
1 ground clamp + 16 mm² cable, length 3 m - 13 mm connector
1 shoulder strap for carrying the unit when working at height
Save 20%
In stock
HELVI
Reference: 23000132
(1 review)
444.25 kr
555.32 kr
444,25 kr tax excl.
or 4 x 111,06 kr
Free delivery
2-year warranty
Replacement torch for Helvi FOX 165 welding machine
Length 2.7m
Save 10%
In stock
Telwin
Reference: 816076
(3 reviews)
17,162.95 kr
19,069.94 kr
17 162,95 kr tax excl.
Free delivery
2-year warranty
Multi-process machine allowing MMA - MIG - TIG welding.
Multi-process MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine controlled by microprocessor.
The WAVE OS system makes welding operations: customisable according to user requirements; traceable and analysable, thanks to data recording on USB; simplified, thanks to synergic parameter adjustment and the presence of specific programs for materials to be welded.
Features:
- 55 customisable programs,
- continuous and pulsed operation,
- user-friendly interface with colour TFT screen,
- Wave OS operating system with pulsed welding programs for specific materials (AB Pulse for aluminium and galvanised sheet metal) and low heat input for thin thicknesses (ATC).
Supplied with 250 A torch length 3 m duty cycle 200 A@60%, and earth clamp + cable 3 m
Save 10%
In stock
Telwin
Reference: 802050
(1 review)
236.77 kr
263.07 kr
236,77 kr tax excl.
or 3 x 78,92 kr
Fast delivery
2-year warranty
For TIG welding (Steel, Stainless steel, Aluminium) and MIG/MAG semi-automatic welding (WIRE) (Aluminium). Specifications: Volume: 950 cc Pressure: 60 bar at 20°C Contents: 60 L max Output valve: M10 Weight: 1120 g Pressure test: PH 165 bar
In stock
SILICONI
Reference: PROTECT 700
(1 review)
499.82 kr
499,82 kr tax excl.
or 4 x 124,96 kr
Free delivery
2-year warranty
PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.
Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.
INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS
It is also possible to apply this anti-spatter product with a brush on the surface to be treated.
Save 10%
In stock
Gys
Reference: 068063
8,148.16 kr
9,053.51 kr
8 148,16 kr tax excl.
Free delivery
2-year warranty
The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).
Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).
This product is Euro Welding's choice
Save 20%
Supplier stock
TOTAL
Reference: 41848
2,130.37 kr
2,662.96 kr
2 130,37 kr tax excl.
or 4 x 532,59 kr
Free delivery
2-year warranty
20 V brushless impact wrench and battery-powered LED floodlight set. 20 V battery-powered brushless impact wrench. Brushless motor. 1/2'' drive. 850 Nm tightening torque. 1,000 Nm loosening torque. 3 screwdriving positions. RPM 0–1600 / 0–2100 / 0–2400. Impacts 0–1500 / 0–1800 / 0–2200. LED light. 2,000 lumens ±10% LED floodlight. 24 W LED output. 120° rotating head. With 1 set of 10 CR-V impact sockets: 10, 12, 13, 14, 15, 17, 19, 21, 22 and 24 mm. 2 x 5 Ah batteries and charger.
In stock
Gys
Reference: 052215
(2 reviews)
10,067.89 kr
10 067,89 kr tax excl.
Free delivery
2-year warranty
This dent puller has a power of 3800 A
It runs on a 16A outlet and a 230 V power supply
It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments
Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened
It is supplied with a slide hammer + 1 box of accessories
Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m
Save 10%
In stock
Gys
Reference: 066595
9,058.64 kr
10,065.16 kr
9 058,64 kr tax excl.
Free delivery
2-year warranty
Generator on wheels Welds steel, stainless steel and aluminium MIG duty cycle: 115A at 60% / 90A at 100% MMA duty cycle: 104A at 60% / 80A at 100% Amperage range: 30 to 200A Combines 3 welding processes in 1 product: - MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and Alu 0.8 to 1mm) - MIG/MAG without gas (flux-cored wire Ø 0.9 mm) - MMA (basic and rutile electrode up to 4 mm) with Anti-stick function 4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool Removable 250A MAG torch (2T/4T) 3m (8mm contact tip) Digital interface and very intuitive adjustment Compatible with 9kva generator Bottle support for gas cylinder up to 4m3 Single-phase 230 V - 16 A power supply Dimensions: 77 x 79x 47 cm - 32kg IP23 rating for outdoor use Accepts long extension cables (100m)
Delivered with: 1x 250A 3m torch - (MB25) 1x 2m 16mm² ground clamp 1x 2m 16mm² electrode holder 1x 1m20 gas hose
Save 30%
In stock
Soudexpert
Reference: 1411061
76.09 kr
108.70 kr
76,09 kr tax excl.
Fast delivery
2-year warranty
MIG welding wire STEEL SG2 diameter 0.6 mm
Spool Ø 100mm - Weight 1 kg
Excellent arc-starting properties
For welding thicknesses up to 2 mm
Requires shielding gas (Argon CO2 mix)
High arc stability at elevated currents
Good wire corrosion resistance
All-position welding
Polarity DC +
Applications:
General steel and ironwork applications
Railway construction
Shipbuilding
Standards:
AWS 5.18: ER 70S-6
EN ISO 14341-A: G46 4 M21 3Si1 / G 42 3 C1 3Si1
DIN 8559: SG2
Save 40%
In stock
Soudexpert
Reference: E6013255
(1 review)
163.87 kr
273.12 kr
163,87 kr tax excl.
or 3 x 54,62 kr
Free delivery
2-year warranty
Universal rutile steel electrode CURRENT E6013
Diameter: 2.5 mm
Rod length: 350 mm
Box of 5 kg
5kg equals +/- 245 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framing
Save 15%
In stock
Kemppi
Reference: TX 163 GV D9 4M
2,321.55 kr
2,731.24 kr
2 321,55 kr tax excl.
or 4 x 580,39 kr
Free delivery
2-year warranty
This valve-type 17 TIG torch is supplied with a long back cap, 1 grey cerium tungsten electrode Ø 2.4 mm, 1 nozzle and a diffuser.
Its length is 4 m with a 9 mm connector (for a cable cross-section ranging from 10 to 25 mm²).
This Flexlite TX TIG torch 163 GV 4M offers excellent technical performance, extended consumable life and everyday welding comfort.
The durable silicone rubber material ensures a firm grip while the innovative torch handle design reduces wrist strain, allowing welders to focus on challenging tasks to achieve the perfect weld.
Save 20%
In stock
BLUE-MASTER
Reference: JMB2-2
1,119.85 kr
1,399.81 kr
1 119,85 kr tax excl.
or 4 x 279,96 kr
Free delivery
2-year warranty
This set contains 7 taps sized
M3-M4-M5-M6-M8-M10-M12
Save 20%
In stock
Soudexpert
Reference: 411204
1,538.58 kr
1,923.23 kr
1 538,58 kr tax excl.
or 4 x 384,65 kr
- For professionals
- Duty cycle 120A @ 60%
- MMA and TIG Lift function
Free delivery
2-year warranty
Equipped with 3-meter cables to facilitate the welder's work
LCD control screen for easy and fast adjustment
MMA and TIG LIFT function
Easily welds coated electrodes: rutile, stainless steel, cast iron and basic up to Ø 4mm
on steel, cast iron and stainless steel up to 10 mm thick
Duty cycle: 60% - 120A
Inverter technology: immediate arc striking, smooth fusion and protection
Welding aids: Hot start, Arc force, Anti-stick
Power: 20-200A - 8.3 kVA
Open circuit voltage: 65V
Featherweight (5kg) - Dimensions: D37xH23xW13cm
Compact size and carrying handle
2-year warranty
Delivered complete with:
- 1 Electrode holder + 25 mm² cable (3 meters)
- 1 Ground clamp + 25 mm² cable (3 meters)
- 1 220V single-phase power cable (1.5 meters)
Sanding belt 100x1000 mm grit 60