Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
- -40%
- Out of stock
Sanding belt 100x1000 mm grit 60
Reference: DEST3239936
Sanding belt 100x1000 mm grit 60
€4.10
€2.46
2,00 € tax excl.
Out of stock
Sanding belt 100x1000 mm grit 60
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Save 20%
Available for order
Optrel
Reference: 1006.600
Optrel - VEGAVIEW 2.5 black welding helmet
(5 reviews)
€404.88
€506.10
329,17 € tax excl.
or 4 x 101,22 €
Free delivery
2-year warranty
This Optrel VEGAVIEW 2.5 welding helmet features 3 sensitivity sensors with the possibility of angle variation via a slider.
Powered by 2 x 3V CR2032 batteries.
The switching time of this helmet is 0.100ms at ambient temperature and 0.070ms at 55°C.
The EN 379 classification of this model is: 1/1/1/2.
Protection level (adjustable shade): 8-12.
Light shade: 2 in grinding mode for maximum clarity.
Weight: 482 g.
Temperature resistance: Welding helmet 220° and cover lens up to 137°.
Suitable for MMA, MIG/MAG and TIG welding as well as plasma cutting. This helmet also features a grinding mode.
Supplied with:
1 headband adjustable in width and length.
Storage bag.
2 x CR2032 batteries.
1 spare outer cover lens.
Warranty card.
2-year warranty with 1 additional year (excluding the battery) if the product is registered within the first 6 months after purchase on www.optrel.com.
Save 20%
Available for order
TOTAL
Reference: 41826
Brushless battery-powered hammer drill TIDLI206681 | 20 V
€60.48
€75.60
49,17 € tax excl.
Fast delivery
2-year warranty
20 V battery-powered hammer drill. Brushless motor. Maximum torque of 66 Nm. Metal and automatic chuck with 13 mm capacity, 22 tightening positions, one drilling position and one hammer position. Impact rate 30,000 bpm. RPM 0-550 / 0-2200. 2 speeds and LED light. Batteries and charger not included.
Save 10%
Available for order
Gys
Reference: 065109
GYS MULTIPEARL 210-4 XL Welding Machine
(16 reviews)
€1,280.22
€1,422.47
1 040,83 € tax excl.
or 4 x 320,06 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating
Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls
TIG torch optional
Save 40%
Available for order
Soudexpert
Reference: E6013255
Rutile electrodes Ø 2.5 x 350 mm for steel welding - 5kg
(1 review)
€18.45
€30.75
15,00 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode CURRENT E6013
Diameter: 2.5 mm
Rod length: 350 mm
Box of 5 kg
5kg equals +/- 245 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framing
Available for order
Gys
Reference: GYSPOT 34.02-34.04
GYS - GYSPOT Stud Puller - Straightening Unit 3500 A - Manual Gun
€1,204.37
979,16 € tax excl.
or 4 x 301,09 €
Free delivery
2-year warranty
The GYSPOT 34.02 and 34.4 have a power of 3500 A. These dent pullers are tools for dent repair and straightening of steel body panels (hood, door, roof, etc.). They feature several functions that make them complete and versatile tools. Thanks to its low power consumption, this nail puller model is powered by a simple 230 V outlet for the 34.02 model
We offer it in two versions: Single-phase 230 V (reference 065741) and three-phase 400 V (reference 067943)
A MULTI-FUNCTION DENT PULLER
Operating modes: • Welding of stars or rings for steel sheet pulling operations.
• Welding of corrugated wire, ideal for straightening a rounded profile (e.g.: wheel arch)
• Shrinking, for light impacts and finishing work.
• Use of the graphite pencil. • Welding of steel studs.
EASY TO USE
• Switch to toggle to graphite pencil mode.
• Intuitive, the potentiometer allows you to select both the power and the desired mode.
• Manual, the weld is generated by a simple press of the gun trigger.
It comes with an inertia hammer fitted with a star tip, nail puller + 3 stars - 1 shrinking tip and a ground pad
Cable lengths:
Ground: Section 50mm² - length 1.7 m
Gun: Section 50 mm² - length 2 m
Save 20%
Available for order
Gys
Reference: 080768
GYS Cutter 35 KF PFC |GYS Plasma Cutter with integrated compressor
(2 reviews)
€1,635.01
€2,043.77
1 329,30 € tax excl.
or 4 x 408,75 €
- Integrated compressor
- Fe 15 mm
- Al/CrNi 10 mm
Free delivery
2-year warranty
Thanks to its integrated compressor, the EASYCUT K35 PFC plasma cutter allows you to cut metal on any construction site where a single-phase power supply is available.
Its PFC technology allows it to operate from 195 V to 265 V and achieve quality cuts even on 100 m construction site extension cords.
Small, lightweight and easy to transport, it is capable of delivering 35 A of power to cut different types of metals up to 15 mm thick in separation cut.
Automatic air regulation adapted to the TPT 35 torch.
Cuts all steels (mild, stainless, hardened, HSLA), aluminum, copper, etc. and cutting speed higher than Oxy-fuel thermal cutting
Very practical on construction sites thanks to its integrated compressor.
Internal air filter with automatic purge to prevent condensation in the torch.
HF-free ignition that avoids interference that could damage nearby electronic equipment.
Storage compartment for consumables.
Ideal for travel and construction sites
Accepts extension cords up to 100 m.
Reinforced body and anti-shock skids.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Rated IP23S to withstand harsh environments.
Optimized cooling with a ventilation channel that isolates the electronic components from dust.
Delivered with:
a TPT 35 torch with a length of 4 m
a ground clamp with a 10 mm² cross-section cable, length 2 m
Two nozzles and two electrodes
Save 40%
Available for order
Soudexpert
Reference: E6013201
Rutile electrodes Ø 2.0 x 300 mm for steel welding - 1kg
(1 review)
€9.23
€15.38
7,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode STEEL CURRENT E6013
Diameter: 2 mm
Rod length: 300 mm
Carton of 1 kg
1 kg is equivalent to +/- 94 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Piping
- Locksmithing
- Sheet metal work
- Steel framing
Available for order
STANZANI
Reference: 010991
Pack of 10 notched washers for dent puller
€7.17
5,83 € tax excl.
Fast delivery
2-year warranty
Pack of 10 notched washers for DECA dent puller
Femi
Reference: Etau
Vise for FEMI column drill press
€38.95
31,67 € tax excl.
Fast delivery
2-year warranty
Vise for Femi column drill press
2 vises are available depending on your drill press model
100 mm vise reference DP12-901 suitable for FEMI drill presses:
DP12-921 - DP12-961 - DP1212-943 -DP12 -941
135 mm vise reference DP12 -902 suitable for drill presses
DP961 - DP12-943
Save 20%
Available for order
Kemppi
Reference: 6102150
KEMPPI - MINARC 150 | MMA Inverter Welding Unit
(3 reviews)
€712.38
€890.47
579,17 € tax excl.
or 4 x 178,10 €
Free delivery
2-year warranty
Key features of the Kemppi Minarc Evo 150:
The little giant of MMA welding by Kemppi
Excellent welding and arc-striking quality
Automatic dynamic function
Compatible with long power cables
High duty cycle: 140A@35%
Lightweight and portable - 4kg
Generator compatible
Made in Finland
2-year warranty
This unit is delivered with:
1 electrode holder + cable (length 3m, cross-section 16 mm²)
1 earth clamp + cable (length 2m, cross-section 16 mm²)
1 power cable with plug, length 3m with Schuko plug
Save 10%
Available for order
Gys
Reference: 066595
GYS - MULTIWELD 200M welding machine - WITH ACCESSORIES
€1,019.88
€1,133.20
829,17 € tax excl.
or 4 x 254,97 €
Free delivery
2-year warranty
Generator on wheels Welds steel, stainless steel and aluminium MIG duty cycle: 115A at 60% / 90A at 100% MMA duty cycle: 104A at 60% / 80A at 100% Amperage range: 30 to 200A Combines 3 welding processes in 1 product: - MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and Alu 0.8 to 1mm) - MIG/MAG without gas (flux-cored wire Ø 0.9 mm) - MMA (basic and rutile electrode up to 4 mm) with Anti-stick function 4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool Removable 250A MAG torch (2T/4T) 3m (8mm contact tip) Digital interface and very intuitive adjustment Compatible with 9kva generator Bottle support for gas cylinder up to 4m3 Single-phase 230 V - 16 A power supply Dimensions: 77 x 79x 47 cm - 32kg IP23 rating for outdoor use Accepts long extension cables (100m)
Delivered with: 1x 250A 3m torch - (MB25) 1x 2m 16mm² ground clamp 1x 2m 16mm² electrode holder 1x 1m20 gas hose
Save 10%
Available for order
Lincoln Electric
Reference: K14098-1
LINCOLN - Inverter multi-process welding machine SPEEDTEC 180 C without torch K1409
(1 review)
€1,224.87
€1,360.97
995,83 € tax excl.
or 4 x 306,22 €
Free delivery
2-year warranty
This Inverter technology machine Lincoln Speedtec 180C allows you to weld using 2 processes: MMA-MIG-MAG
It allows welding with rutile and basic electrodes (stainless steel - cast iron, etc.) of Ø 1.6 to 4 mm (electrode holder not included)
It operates on a 16 A or 25 A - 230 V domestic outlet depending on the amperage setting.
Its adjustment range is 20 to 200 A for MIG-MAG welding and 20 to 160 A for MMA welding.
Easy polarity reversal to allow the use of flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.
It features the following devices:
PFC (power factor corrector) It can be used with a 100 m extension cord without any power loss.
The power supply can be provided from a generator.
HOT START adjustable, which reduces the risk of sticking when the electrode and workpiece are cold, also facilitates arc ignition and penetration.
ARC FORCE adjustable, which maintains constant amperage regardless of arc length.
ANTI-STICKING reduces the risk of the electrode sticking to the workpiece.
Its advantages:
The high duty cycle of this machine guarantees use without premature triggering of the thermal protection system.
This machine is delivered with:
1 power cable 2 m
1 gas hose 2 m
1 ground cable 3 m
1 set of rollers Ø 0.8 and 1 mm for steel welding wire
Save 50%
Available for order
Soudexpert
Reference: 33005
FRENCH 300 A electrode holder
(1 review)
€12.81
€25.62
10,42 € tax excl.
Fast delivery
2-year warranty
Screw electrode holder 300 Amperes
Right-hand thread
For electrodes Ø 1.6 to 3.2 mm
Rotating handle for secure grip
Head and handle fully insulated
2 electrode positions: 90° for flat welding and 45° for positional work
Current capacity: 300 A
Duty cycle: 35% at 300 A and 60% at 250 A
Save 20%
Available for order
Weldline
Reference: W000403824
EUROSPEED LS WELDLINE Welding Helmet
(5 reviews)
€123.00
€153.75
100,00 € tax excl.
Free delivery
2-year warranty
This auto-darkening welding helmet features 2 sensors.
Solar power + 2 AAA batteries
Viewing area: 98 x 40 mm. Wrap-around shape for optimal head protection.
Switching time light/dark: 1/25000 sec
Return to light state adjustable from 0.1 to 1 second.
Adjustable shade from 9 to 13 for welding.
Grinding mode via internal button.
the "LS" technology applied to the lens of this welding helmet, in addition to its role of protecting against harmful rays, helps increase the penetration rate.
In clear mode, the lens lets more color through to the welder's eye, allowing a more precise rendering of detail by reducing the eye's adaptation effort.
The welder will be more precise in their movements and less fatigued during welding operations.
18-month warranty.
Optical class 1/1/1/2
Weight 475 g
Delivered with:
2 outer protective lenses
1 inner protective lens
1 sweatband
1 comfort cushion on headband.
Save 20%
TOTAL
Reference: 41726
1/2'' brushless cordless impact wrench TIWLI20401 | 20 V
€70.73
€88.41
57,50 € tax excl.
Fast delivery
2-year warranty
20 V cordless impact wrench. Brushless motor. 1/2'' insert. Maximum tightening torque 400 Nm. Loosening torque 550 Nm. 20 V No-load speed 0–1600 / 0–1900 / 0–2300 rpm. Impacts 0–2100 / 0–2500 / 0–2900 bpm. LED light. With 3 sockets (17, 19, 21 mm).
Save 30%
Available for order
TOTAL
Reference: 40012
Fast charger TFCLI20411E | 20 V
€22.55
€32.21
18,33 € tax excl.
Fast delivery
2-year warranty
20 V fast battery charger. Charging amperage: 4 Ah. Charging time for 2 Ah battery: 1/2 h. Compatible with all TOTAL 20 V batteries.
TOTAL 40012 | Fast charger TFCLI20411E | 20 V
Sanding belt 100x1000 mm grit 60