Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
5,75 € tax excl.
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
RAS
Good value for money, does the job very well.
Top
It does the job and I like its handling
Not expensive at all and perfect.
This like gets the job done
Compliant product but haven't had time to try yet
Strong, long gloves that protect the hands and forearms well
Spool of stainless steel wire at the right price to try over time.
Not tried yet but good quality product
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
In stock
Sacit
Reference: KIT-243/244
€40.37
32,82 € tax excl.
Fast delivery
2-year warranty
Earth clamp 250 Amperes + 25 mm² cable length 3 m (KIT-243) or length 4 m (KIT 244)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
Connector TX 25
Opening 45 mm
In stock
Gys
Reference: AMF
€10.10
8,21 € tax excl.
Fast delivery
2-year warranty
Male / Female Adapter AMF 50/25
Note: 2 references available:
Female: Ø 9 mm - Male 13 mm for reference 038127
Female: Ø 13 mm - Male 9 mm for reference 038110
Duty cycle 300A @ 35% - 200 A @60%
In stock
Telwin
Reference: 722626
€5.08
4,13 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel flux-cored wire Ø 0.9 - 1.2 mm
Compatible with TELWIN machines:
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 Synergic - 210 - 180 EURO - 210 Dual Synergic - 150 DUAL SYNERGIC - 180 DUAL SYNERGIC -
MAXIMA 160 - 190 - 200 - 230 - 270
TELMIG 281/2 TURBO
In stock
DECA
Reference: 010821
€46.13
€54.27
37,50 € tax excl.
Fast delivery
2-year warranty
MIG torch for DECA brand welding machine, adapted to the MIGA 215 model
Allows the use of solid wire Ø 0.6 / 0.8 mm or flux-cored wire of section Ø 0.6 to 0.9 mm
Length 2 m
110 A @ 35 %
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
Lincoln Electric
Reference: 2GAL-Aluminium
€23.06
18,75 € tax excl.
Fast delivery
2-year warranty
The aluminium wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL-WELDING (OTAI)
Futura 2005 and 0505C
for welding wire:
Aluminium Ø 0.8 / 1 mm
Aluminium Ø 1.2 / 1.6 mm
In stock
Trafimet
Reference: lot 010341
€11.45
€12.72
9,31 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
In stock
Gys
Reference: 072336
€51.20
41,63 € tax excl.
Fast delivery
2-year warranty
This kit is suitable for the GYS MULTIPEARL 210-2 welding machine
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 1 type A roller with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
In stock
DECA
Reference: DECA-2GAL-JOB522
€33.31
27,08 € tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 522 and 523 LAB
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
Supplier stock
Jelt
Reference: Jelt-58
€12.56
10,21 € tax excl.
Fast delivery
2-year warranty
3 products are available for 3 different results after application:
Galva Flash
The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance
Matt Galva
The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.
Gloss Galva
The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.
In stock
Gys
Reference: 041417
€56.37
45,83 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 1.0 M8 steel / stainless steel
5 contact tips Ø 1.2 M8 steel / stainless steel
5 contact tips Ø 1.0 M8 aluminium
5 contact tips Ø 1.2 M8 aluminium
3 diffusers 350 A
3 gas nozzles 350 A
HELVI
Reference: 23005007
€8.97
7,29 € tax excl.
Fast delivery
2-year warranty
This nozzle fits on the end of your MIG torch
Its role is to direct the gas flow toward the weld and the melting wire.
This nozzle has an internal thread fitting the torches of HELVI Fox 160 and Panther 132 welding machines
DECA
Reference: CDC-DECA
€14.05
11,42 € tax excl.
Fast delivery
2-year warranty
Swan neck for MIG-MAG DECA torch.
This product is a replacement accessory, it is not required when purchasing a new welder.
The swan neck reference must be selected according to your DECA welder reference:
Swan neck 010240 for DECA welders:
Decastar 130 and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Swan neck 010485 for DECA welders:
Decastar 150 E and 180 E
Decamig 180 E.
D-MIG 350 and 380 if your welder is fitted with a torch without EURO connection fixed to your welder.
Swan neck 010488 for DECA welders:
Decamig 2500
D-MIG 390 and 420S
JOB220 LAB -522-523
D-Mig 520T - 525T - 530S - 520SD -530SD - 525TD
MIGA 218- 220-225XL
Swan neck 010824 for DECA welder
MIGA 215
In stock
Le Lorrain
Reference: 150381
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Female neutral gas nozzle
Compatible with quick isocouple connectors 150376
This nozzle fits onto the outlet of your fixed-position regulator and allows you to couple your gas hose fitted with connector 150376
In stock
StrongHandTools
Reference: MS
€22.55
18,33 € tax excl.
Fast delivery
2-year warranty
The quick and easy way to hold parts.
Equipped with a central hole for easier gripping
Several angle options depending on the chosen model:
MS 45: pulling force 30 kg - Dimensions 111x95x19mm - Angles 45 and 90°
MS 60: pulling force 25 kg - Dimensions 111x95x19mm - Angles 60 and 90°
MS346C: pulling force 40 kg - Dimensions 140x111x19mm - Angles 45 - 60 and 90°
In stock
Lincoln Electric
Reference: W000011139
€169.13
137,50 € tax excl.
or 3 x 56,38 €
Free delivery
2-year warranty
This 35C50 kit includes:
1 SEGURA 300 electrode holder + 35 mm² cable 4 m long
1 Hippo 400 earth clamp + 35 mm² earth cable 4 m long
Conductor diameter 13 mm
Duty cycle 300A@35%
In stock
Trafimet
Reference: MD0005-1
€11.41
9,28 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire
3 diameters available: 0.8 - 1 and 1.2 mm
M8 thread. Length 30 mm
For Mig-Mag torch 450A @100%
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
