Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- Out of stock
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm
Reference: 358370
Welding brush wooden handle with 4 rows of straight stainless steel wires
€9.74
7,92 € tax excl.
Out of stock
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm
Customer reviews
Product reviews
-
If my torch is not stretched to the max, the wire does not come out. A small loop, and it doesn't come out, we'll look into the problem but I think the sheath isn't superb.
-
Soft and handy leather. Good manufacturing. The table which guides the size of the gloves is correct.
-
Can be used in all situations
-
the thread is of good quality and corresponds to the descriptions
-
To brush iron you absolutely must use stainless steel
-
Delivery is very fast I have already used a few soldering machines from different brands but with GYS none are up to the task
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Gys
Reference: 039483
(6 reviews)
€19.42
15,79 € tax excl.
Fast delivery
2-year warranty
Drive roller for GYS MIG-MAG welding machine for steel or stainless steel wire of cross-section 0.6 and 0.8 mm.
Compatible with GYS welding machines:
Easymig: 110 - 130 and 140
Smartmig 110
Sparkmig 110
Neomig 130
Compatible with DECA welding machines:
Miga 215 - Miga 218 and Miga 220.
In stock
DECA
Reference: DECA-GAL-JOB220-AL
€14.15
11,50 € tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA machines:
JOB 220 LAB
MIGA 225 XL
for aluminum welding wire of diameter
0.8 / 1 mm
1 / 1.2 mm
In stock
Kemppi
Reference: 4307660
(1 review)
€58.63
47,67 € tax excl.
Fast delivery
2-year warranty
Teflon wire liner for aluminium wire Ø 0.6 to 1 mm.
Compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.
In stock
StrongHandTools
Reference: MS2
(2 reviews)
€128.13
104,17 € tax excl.
Free delivery
2-year warranty
The quick and easy way to hold round or flat workpieces
Two on/off switches for independent operation
2 sizes are available:
MS2-80: pulling force 55 kg - Dimensions 152 x 152 x 38 mm.
MS2-90: pulling force 120 kg - Dimensions 197 x 197 x 48 mm
In stock
StrongHandTools
Reference: MFT10
(9 reviews)
€17.93
14,58 € tax excl.
Fast delivery
2-year warranty
The best way to position and tack pieces together
Suitable for different shapes, round, flat or angled metal surfaces.
Features 6 magnets
In stock
Kemppi
Reference: 4307650
€28.03
22,79 € tax excl.
Fast delivery
2-year warranty
Wire guide liner for steel or stainless steel wire Ø 0.6 to 1 mm.
Suitable for KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on the MINARMIG 170 AND 200 EVO welding machines sold on our website.
In stock
Le Lorrain
Reference: 094200
(101 reviews)
€97.38
79,17 € tax excl.
Fast delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
They comply with and are designed according to standard EN 585/ISO 2503
Both gauges are individually covered with a soft rubber casing to protect them from possible impacts. Gauge dimensions: Ø 50 mm
This regulator has an adjustable flow rate from 0 to 30 liters/minute
Type C connection thread.
French Manufacturing
In stock
Trafimet
Reference: KCF
(5 reviews)
€3.30
2,68 € tax excl.
Fast delivery
2-year warranty
1 Female quarter-turn connector.
In stock
Oxyturbo
Reference: 215310
(17 reviews)
€26.54
21,58 € tax excl.
Fast delivery
2-year warranty
Flow meter for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O².
The maximum possible setting with this regulator is 6 liters per minute when fully open
M10 thread
Ridged fitting for hose with inner Ø 6.3 to 7.5 mm
We offer two models
- With one gauge to adjust the flow rate precisely
- With two gauges to check the fill level of the cylinder and adjust the flow rate precisely
Regulators accepting gas hoses with an inner diameter of 6.5 to 7.3 mm
HELVI
Reference: 23000133
(1 review)
€50.84
41,33 € tax excl.
Fast delivery
2-year warranty
Replacement torch for Fox 160 Helvi MIG welder
Length 2m
Sold without contact tip or contact tube.
In stock
Sacit
Reference: KIT-242/245
(10 reviews)
€31.16
25,33 € tax excl.
Fast delivery
2-year warranty
Earth clamp 250 Amperes + 16 mm² cable 3 m long (kit-245) or 4 m long (kit-242)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 25 connector
In stock
Telwin
Reference: 803073
(3 reviews)
€265.47
215,83 € tax excl.
or 3 x 88,49 €
Free delivery
2-year warranty
This trolley is the ideal way to move your welding machine.
This is a 2-in-1 trolley: welding machine + gas cylinder on the same support.
Welding machine up to 65 cm in height.
Gas cylinder up to 4 m³
Assembled dimensions: 940 x 480 x H 1180 mm
The cylinder and the welding machine are secured to the trolley with straps (included).
Trolley sold without equipment.
The stated price does not include the gas cylinder or the welding machine.
Delivered unassembled.
In stock
Weldline
Reference: W000335164
(10 reviews)
€7.07
5,75 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
In stock
DECA
Reference: 011224
€42.53
34,58 € tax excl.
Fast delivery
2-year warranty
2 drive rollers for DECA multi-process machine reference JOB 522 or 523 LAB, for flux-cored welding wire (gasless) with diameter 0.8 to 1.2 mm.
Supplier stock
StrongHandTools
Reference: MVDF 44
(14 reviews)
€35.88
29,17 € tax excl.
Fast delivery
2-year warranty
Articulated positioner for holding sheet metal, round, flat or square workpieces during welding operations
Each positioner has 4 magnets
Pack of 4 positioners
In stock
Telwin
Reference: 722130
(1 review)
€24.55
19,96 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for flux-cored steel MIG welding wire Ø 0.8 - 0.9 - 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 230 and 243 WAVE -240 - 260
ELECTROMIG 220 Synergic - 230 - 300 SYN. - 330 WAVE
TELMIG 281/2 TURBO
MASTERMIG 220/2 - 270/2 - 300
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm