Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
Reference: 039988
GYS - CNC interface kit for plasma cutter
€337.23
274,17 € tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
Customer reviews
Product reviews
-
top
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Supplier stock
Gys
Reference: 037540
Consumable Kit for Plasma Gys CUTTER 70 CT
€173.22
140,83 € tax excl.
or 3 x 57,74 €
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles and 3 x 70 A nozzles
- 3 electrodes
- 1 deflector pad
It is compatible with the Gys Cutter 70 CT plasma cutter.
Supplier stock
Gys
Reference: 037564
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
(5 reviews)
€35.88
29,17 € tax excl.
Fast delivery
2-year warranty
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
Available for order
Gys
Reference: MT-70
Manual plasma torch MT-70 - without accessories
(1 review)
€507.38
412,50 € tax excl.
or 4 x 126,85 €
Free delivery
2-year warranty
Torch for plasma cutter MT-70
This torch also allows gouging
Duty cycle: 50 A@100% - 65 A@60% - 70 A @ 50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
For gouging: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
For gouging: 5.6 bar - 185 l/min
For torch installation, the power source must be switched off.
Supplied without consumables.
Available for order
Lincoln Electric
Reference: W8800117R
Cartridge for special plasma impurity filter
(2 reviews)
€173.74
141,25 € tax excl.
or 3 x 57,91 €
Free delivery
2-year warranty
Replacement cartridge to be inserted in the Gys filter reference 039728 or the Lincoln filter reference LAF1250.
Available for order
Gys
Reference: 040205
Compass Kit for Plasma Torch MT25K /35K - TPT40 - Z
(7 reviews)
€101.48
82,50 € tax excl.
Fast delivery
2-year warranty
This compass kit for single-phase plasma torch is used with plasma cutters equipped with one of the plasma torch models below
MT25K - MT35K - TPT40 - Z
This kit also includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut circles up to 134 cm in diameter.
- Ideal for making circular cuts between 10 and 134 cm in diameter.
- Magnetic centring pin for fast cuts on all ferrous surfaces.
- Screw-in centring pin for non-metallic materials.
- "Centre punch" centring pin for precise centring without perforating the sheet metal.
Available for order
Gys
Reference: buses 40
4 shield nozzles for plasma cutter GYS Cutter 31-40FV and 35 KF
(4 reviews)
€51.05
41,50 € tax excl.
Fast delivery
2-year warranty
4 plasma torch nozzles, compatible with GYS Cutter 31, 40 FV, EasyCut 40 models, as well as the Cutter 35KF model with built-in compressor
Supplier stock
Gys
Reference: 037625
1 cutting guide 20/70A for torch MT -70
(3 reviews)
€26.60
21,63 € tax excl.
Fast delivery
2-year warranty
1 cutting guide 20/70A for torch MT -70
Available for order
Gys
Reference: 037618
GYS | Ohmic Detection Nozzle 20 / 70 A
(1 review)
€89.18
72,50 € tax excl.
Fast delivery
2-year warranty
Ohmic detection nozzle 20 / 70 A designed for use with the Plasma torch reference AT-70
Available for order
Gys
Reference: 040199
Cutting guide carriage for plasma torch
(4 reviews)
€28.70
23,33 € tax excl.
Fast delivery
2-year warranty
Cutting carriage for plasma torch S25K / S35K / S45
Available for order
Gys
Reference: 061613
GYS Plasma Accessories Kit for GYS MT-70 Torch
(1 review)
€142.47
115,83 € tax excl.
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles
- 3 electrodes
- 1 deflector pad
This kit is compatible with the MT-70 torch model.
Available for order
Gys
Reference: 037601
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
(3 reviews)
€48.49
39,42 € tax excl.
Fast delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
Available for order
Gys
Reference: 039964
Consumable set for Plasma Gys CUTTER 35K
(2 reviews)
€50.22
40,83 € tax excl.
Fast delivery
2-year warranty
This complete set contains:
- 1 nozzle
- 1 diffuser
- 3 contact tips
- 3 electrodes
It is suitable for the Gys Cutter 35 K plasma cutter
Supplier stock
Gys
Reference: 040212
10 nozzles for GYS Cutter 31 and 40 FV and 35KF-45CT plasma cutter torch
(8 reviews)
€33.73
27,42 € tax excl.
Fast delivery
2-year warranty
10 nozzles for GYS plasma cutter torch
Models Cutter 31 - 40 FV - Easycut 40 and the model with integrated compressor Cutter 35KF - 45 CT
Supplier stock
Gys
Reference: AT-70
Automatic plasma torch AT-70 -without accessories-
(2 reviews)
€691.88
562,50 € tax excl.
or 4 x 172,97 €
Free delivery
2-year warranty
Automatic plasma torch for plasma cutter at-70
Duty cycle: 50 A@100% - 65 A@60% - 70 A@50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
Before installing the torch, the generator must be switched off.
Supplied without consumables.
Product available on order only
Available for order
Gys
Reference: 037984
Compass kit for Plasma torch MT70 - MT125
(1 review)
€162.98
132,50 € tax excl.
or 3 x 54,33 €
Free delivery
2-year warranty
The compass kit allows you to quickly and precisely cut circles up to 82 cm in diameter.
- Ideal for making circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches MT-70 and MT-125 A
- Premium quality.
Available for order
Gys
Reference: 037557
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
(4 reviews)
€39.98
32,50 € tax excl.
Fast delivery
2-year warranty
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125