Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
1 cutting guide 20/70A for torch MT -70
Reference: 037625
1 cutting guide 20/70A for torch MT -70
€26.60
21,63 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
1 cutting guide 20/70A for torch MT -70
Accessories for 1 cutting guide 20/70A for torch MT -70
€507.38
Manual plasma torch MT-70 - without accessories
Reference: MT-70
€25.12
1 gouging pad 20/70A for torch MT -70
Reference: 037632
€48.49
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
Reference: 037601
€25.12
5 cutting nozzles 20 / 50 A for plasma torch MT-70 / AT-70
Reference: 037571
€23.06
5 cutting nozzles 70 A for plasma torch MT-70 / AT-70
Reference: 037588
€35.88
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
Reference: 037564Customer reviews
Product reviews
-
good
-
Good accessory
-
very good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
Gys
Reference: 061613
GYS Plasma Accessories Kit for GYS MT-70 Torch
(1 review)
€142.47
115,83 € tax excl.
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles
- 3 electrodes
- 1 deflector pad
This kit is compatible with the MT-70 torch model.
Available for order
Gys
Reference: 039964
Consumable set for Plasma Gys CUTTER 35K
(2 reviews)
€50.22
40,83 € tax excl.
Fast delivery
2-year warranty
This complete set contains:
- 1 nozzle
- 1 diffuser
- 3 contact tips
- 3 electrodes
It is suitable for the Gys Cutter 35 K plasma cutter
Available for order
Gys
Reference: 040199
Cutting guide carriage for plasma torch
(4 reviews)
€28.70
23,33 € tax excl.
Fast delivery
2-year warranty
Cutting carriage for plasma torch S25K / S35K / S45
Supplier stock
Gys
Reference: 037588
5 cutting nozzles 70 A for plasma torch MT-70 / AT-70
(1 review)
€23.06
18,75 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles 70 A for plasma torch MT-70 / AT-70
Available for order
Gys
Reference: 080799
GYS |10 nozzles for plasma cutter torch Cutter 35KF PFC
(1 review)
€33.83
27,50 € tax excl.
Fast delivery
2-year warranty
10 nozzles for TPT35 type torch supplied with the GYS Cutter 35 K PFC plasma cutter
Available for order
Gys
Reference: 037977
Trolley for plasma torch MT-70
(1 review)
€76.88
62,50 € tax excl.
Fast delivery
2-year warranty
Replacement trolley for the MT70/125A compass kit
Available for order
Lincoln Electric
Reference: W88X1456A-LAF1250
Special impurity filter for plasma cutter
(6 reviews)
€148.62
120,83 € tax excl.
Free delivery
2-year warranty
This filter protects your torch and consumables from small particles carried by air that interfere with its proper operation.
It comes with a filter cartridge (reference W8800117R)
Lincoln reference: W88X1456A
Available for order
Gys
Reference: 037595
5 gouging nozzles 70 A for plasma torch MT-70
(2 reviews)
€45.72
37,17 € tax excl.
Fast delivery
2-year warranty
5 gouging nozzles 70 A for plasma torch MT-70
Available for order
Gys
Reference: 037571
5 cutting nozzles 20 / 50 A for plasma torch MT-70 / AT-70
(3 reviews)
€25.12
20,42 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles for plasma torch MT-70 / AT-70
Available for order
Gys
Reference: MT-70
Manual plasma torch MT-70 - without accessories
(1 review)
€507.38
412,50 € tax excl.
or 4 x 126,85 €
Free delivery
2-year warranty
Torch for plasma cutter MT-70
This torch also allows gouging
Duty cycle: 50 A@100% - 65 A@60% - 70 A @ 50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
For gouging: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
For gouging: 5.6 bar - 185 l/min
For torch installation, the power source must be switched off.
Supplied without consumables.
Available for order
Gys
Reference: 040182
GYS |4 protection nozzles for plasma cutter Cutter 35 KF PFC
(1 review)
€55.04
44,75 € tax excl.
Fast delivery
2-year warranty
4 nozzles suitable for the torch on the Gys Cutter 35 KF PFC plasma cutter.
These nozzles are also compatible with plasma cutters equipped with a torch of type MT25K - TPT25 - TPT35
Available for order
Gys
Reference: 039957
Consumable kit for Plasma Gys CUTTER 31-40 FV -45CT
(13 reviews)
€60.48
49,17 € tax excl.
Fast delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 nozzle tips
- 3 electrodes
It is compatible with the Gys Cutter 31 and 40 FV and Easycut 40 plasma cutters
Available for order
Gys
Reference: 040205
Compass Kit for Plasma Torch MT25K /35K - TPT40 - Z
(7 reviews)
€101.48
82,50 € tax excl.
Fast delivery
2-year warranty
This compass kit for single-phase plasma torch is used with plasma cutters equipped with one of the plasma torch models below
MT25K - MT35K - TPT40 - Z
This kit also includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut circles up to 134 cm in diameter.
- Ideal for making circular cuts between 10 and 134 cm in diameter.
- Magnetic centring pin for fast cuts on all ferrous surfaces.
- Screw-in centring pin for non-metallic materials.
- "Centre punch" centring pin for precise centring without perforating the sheet metal.
Supplier stock
Gys
Reference: 064720
Consumable Kit 85/105A for Plasma Gys CUTTER 125
€335.18
272,50 € tax excl.
or 4 x 83,80 €
Free delivery
2-year warranty
This complete kit IS suitable for the Gys Cutter 125 CT plasma torch
Supplier stock
Gys
Reference: AT-70
Automatic plasma torch AT-70 -without accessories-
(2 reviews)
€691.88
562,50 € tax excl.
or 4 x 172,97 €
Free delivery
2-year warranty
Automatic plasma torch for plasma cutter at-70
Duty cycle: 50 A@100% - 65 A@60% - 70 A@50%
Switch (trigger) characteristics: 0.5 A / 48 VDC
Applied standard EN60974-7/2013
2 lengths available: 6 and 12 m.
Recommended pressure / flow rate:
6 m torch:
For cutting 20 and below 70 A: 5.0 bar - 185 l/min
12 m torch
For cutting 20 and below 70 A: 5.6 bar - 185 l/min
Before installing the torch, the generator must be switched off.
Supplied without consumables.
Product available on order only
Available for order
Gys
Reference: 037557
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
(4 reviews)
€39.98
32,50 € tax excl.
Fast delivery
2-year warranty
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
1 cutting guide 20/70A for torch MT -70