Italy
Germany
Netherlands
Ireland
Portugal
Norway
Spain
Perfecta 3 electrode holder 250 Amperes + 35 mm² cable length 4 m (KIT-516) or length 5 m (KIT 566)
Ground clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 50 connector
Reference: KIT-516
Electrode holder 250 A + 35 mm² cable - 13 mm connector
758.20 kr
606,56 kr tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
Perfecta 3 electrode holder 250 Amperes + 35 mm² cable length 4 m (KIT-516) or length 5 m (KIT 566)
Ground clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 50 connector
Customer reviews
Product reviews
-
Very good
-
RAS
-
good
-
super and long .extra length
-
Very good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
SOUDO METAL
Reference: MIMTSM
Magnetic holder for MIG torch
(68 reviews)
77.46 kr
61,97 kr tax excl.
Fast delivery
2-year warranty
Magnetic holder for MIG torch
Available for order
Telwin
Reference: 742090
Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm
(3 reviews)
159.60 kr
127,68 kr tax excl.
or 3 x 53,20 kr
Free delivery
2-year warranty
Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm
Compatible with TELWIN welding machines:
TECHNOMIG 215 Dual Synergic - 225 - 240 - 260
ELECTROMIG 220 Synergic - 230 - 330 WAVE
MASTERMIG 220/2 - 270/2 - 300
DECA
Reference: 010241
Steel wire guide liner for DECA MIG torch
(3 reviews)
61.95 kr
49,56 kr tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner. Wire Ø 0.6/1 mm for steel wire - stainless steel wire and flux-cored wire (gasless)
Length 3 m
This liner fits DECA welding machines
MIGA 215
D-MIG 230 AC - Starflux 130 AC
D-MIG 235 - 265 - 350 - 380 with fixed torch
Available for order
GEKA
Reference: FIL-200.CORTEN
CORTEN steel wire coil diameter Ø 200 mm weight 5 kg
(26 reviews)
466.10 kr
372,88 kr tax excl.
or 4 x 116,53 kr
Free delivery
2-year warranty
CORTEN steel wire coil type 80 SG Ø 200 mm Weight 5 Kg
Standard AW A5.28 - ER 80S-G
Standard ISO 16834-A - G ZMn3Ni1 Cu
Wire section available: 0.8, 1 and 1.2 mm
The use of this welding wire requires the supply of gas (Argon + CO² mixture) during use.
Available for order
Le Lorrain
Reference: 514004
2 ear clamps for hose outer Ø 11/13 mm
(15 reviews)
18.69 kr
14,95 kr tax excl.
Fast delivery
2-year warranty
2 ear clamps Ø 11/13 mm for hose with Ø internal 6.3 mm
Available for order
Gys
Reference: AMF
1 male / female adapter
(26 reviews)
76.72 kr
61,37 kr tax excl.
Fast delivery
2-year warranty
Male / Female Adapter AMF 50/25
Note: 2 references available:
Female: Ø 9 mm - Male 13 mm for reference 038127
Female: Ø 13 mm - Male 9 mm for reference 038110
Duty cycle 300A @ 35% - 200 A @60%
Save 10%
Supplier stock
Trafimet
Reference: lot 010341
Set chipping hammer + 3-row steel welding brush
(32 reviews)
86.96 kr
96.62 kr
69,57 kr tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
Available for order
Kemppi
Reference: 9591079
KEMPPI - 5 insulating rings
133.16 kr
106,53 kr tax excl.
Free delivery
2-year warranty
5 insulating rings compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model found on the MINARMIG 170 AND 200 EVO welding machines sold on our website.
Available for order
Oxyturbo
Reference: 245400
Regulator with flowmeter and column for refillable cylinder
(8 reviews)
693.07 kr
554,46 kr tax excl.
or 4 x 173,27 kr
Free delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².
They comply with and are designed according to standard EN 585/ISO 2503
Pressure gauge size: Ø 70 mm.
This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter
Available for order
Trafimet
Reference: GM0512
Trafimet wire liner for MIG torch steel or stainless steel welding Length 5 M
65.78 kr
52,63 kr tax excl.
Fast delivery
2-year warranty
Wire liner for steel or stainless steel wire - Length 5 m for wire Ø 1 and 1.2 mm.
Inner diameter 2 mm and outer diameter of the liner 4.6 mm
Available for order
Le Lorrain
Reference: 054202
2-Column Regulator Argon and Argon +CO² Gas
(3 reviews)
2,328.33 kr
1 862,67 kr tax excl.
or 4 x 582,08 kr
Free delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
It is manufactured in accordance with standard EN 585/ISO 2503
This regulator can supply two TIG or MIG machines simultaneously or provide parallel inerting of the pipe to be welded
This regulator has an adjustable flow rate from 0 to 30 litres/minute. The column reading allows very precise gas flow measurement
The pressure gauge measures 50 mm and is protected by a rubber cap
Type C connection thread
French manufacture.
Available for order
Telwin
Reference: 802037
Stainless steel kit for welding spool Ø 100 mm Telwin unit
(5 reviews)
465.63 kr
372,50 kr tax excl.
or 4 x 116,41 kr
Free delivery
2-year warranty
This kit allows your Telwin welding unit, whose references are indicated below, to accept welding wire spools of Ø 100 mm.
It contains:
- 1 spool adapter.
- 1 stainless steel wire spool Ø 0.8 mm weighing 500 g.
- 1 drive roller for steel or stainless steel wire Ø 0.6 and 0.8 mm.
- 10 contact tips for steel wire Ø 0.8 mm
- 2 gas nozzles Ø 12 mm
This kit fits the following TELWIN units:
Bimax 132-152-162-4.135-4.195
Telmig 150/1- 170/1 - 180/2 -195/2 -200/2 -203/2 -250/ 2 - 251/2 - 281/2
Mastermig 200/2 - Technomig Synergic Dual 150 - 180 -210- 215
Electromig 220 Synergic - Technomig 223 Treo Synergic - Technomig 225.
Available for order
Kemppi
Reference: W00
KEMPPI - Drive rolls for Minargmig welder
(1 review)
303.69 kr
242,95 kr tax excl.
or 4 x 75,92 kr
Free delivery
2-year warranty
These drive rolls are suitable for the Minarmig 170 and 200 EVO welding machines.
2 references depending on your needs
For use with flux-cored wire diameter 0.8 to 1 mm (without gas): W001692
For use with solid steel, stainless steel or aluminum wire diameter 0.6 to 1 mm (without gas): W000749
Available for order
Kemppi
Reference: 9580173
KEMPPI - 1 gas diffuser
(1 review)
58.40 kr
46,72 kr tax excl.
Fast delivery
2-year warranty
1 gas diffuser compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.
Supplier stock
DECA
Reference: DECA-GAL-JOB220
Steel wire drive roll for DECA JOB 220 and MIGA 225 XL welding machine
(2 reviews)
107.83 kr
86,27 kr tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
Available for order
Oxyturbo
Reference: 255200.01
Mini Dual-Gauge Regulator for refillable cylinder
(51 reviews)
385.45 kr
308,36 kr tax excl.
or 4 x 96,36 kr
Free delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
They comply with and are designed according to standard EN 585/ISO 2503
Gauge dimensions: Ø 50 mm
This regulator has an adjustable flow rate from 0 to 30 litres / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
The quick isocoupler fittings sold on our website are not compatible with this regulator
Perfecta 3 electrode holder 250 Amperes + 35 mm² cable length 4 m (KIT-516) or length 5 m (KIT 566)
Ground clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 50 connector