Customer service: 02 97 80 78 91 Mon > Fri 9am-12pm / 1:30pm-5pm
Delivery free from €120!By choosing a welding machine on Soudure.pro, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with EN 60974-1 guarantees that the equipment is intended for industrial and professional use and, regarding electromagnetic compatibility rules, that it is class A equipment.
Before use, you must check the following points in particular:
- The electrical network used with this type of device must be properly grounded.
- The electrical line to which the welding machine is connected must be controlled by a fuse with an amperage matching the value shown on the rating plate or in the supplier manual.
Depending on the model you are interested in, especially its power in amperes or current type, single-phase or three-phase, you should contact your electricity supplier to make sure your subscription is suitable.
- Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other health effects that are not yet known.
In general, as with any other tool, it is essential to read the user manual supplied with the machine, including the safety instructions, before using this equipment.
View as
Supplier stock
Reference: 130712
32,40 €
27,00 € fara TVA.
Fast delivery
2-year warranty
7 buses pour chalumeau soudeur ROC 0 De 40 à 400 l/h Filetage 8x100
L'étoile comporte 6 buses +1 pour chalumeau oxygène/acétylène
Ces dernières diffusent le gaz avec un débit de 63 à 400 l/h selon la buse
Ce pack comprend :
- Une étoile porte becs
- 7 buses : 63/100/160/200/250/315/400
Supplier stock
Reference: 136027
22,00 €
18,33 € fara TVA.
Fast delivery
2-year warranty
Buse de coupe IC pour chalumeau HP MINI ROC 10/10
Épaisseur de découpe : 10 à 25 mm
Supplier stock
Reference: 136026
22,00 €
18,33 € fara TVA.
Fast delivery
2-year warranty
Buse de coupe IC pour chalumeaux type HP MINI ROC 7/10
Épaisseur de découpe : 3 à 5 mm
Supplier stock
Reference: 1805
22,00 €
18,33 € fara TVA.
Fast delivery
2-year warranty
BUSE DE COUPE HP CONE G1 20/10
Gaz ACETYLENE
Epaisseur de coup de 80 à 120mm
Supplier stock
Reference: 1802
22,00 €
18,33 € fara TVA.
Fast delivery
2-year warranty
BUSE DE COUPE HP CONE G1 12/10
Pour coupeur ROC : cone G1
Calibre 12/10 Gaz : ACETYLENE
Epaisseur de coupe de 20 à 50mm
