By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
Available for order
DECA
Reference: 010821
405.53 kr
477.09 kr
405,53 kr tax excl.
or 4 x 101,38 kr
Free delivery
2-year warranty
MIG torch for DECA brand welding machine, adapted to the MIGA 215 model
Allows the use of solid wire Ø 0.6 / 0.8 mm or flux-cored wire of section Ø 0.6 to 0.9 mm
Length 2 m
110 A @ 35 %
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
DECA
Reference: 010241
71.69 kr
71,69 kr tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner. Wire Ø 0.6/1 mm for steel wire - stainless steel wire and flux-cored wire (gasless)
Length 3 m
This liner fits DECA welding machines
MIGA 215
D-MIG 230 AC - Starflux 130 AC
D-MIG 235 - 265 - 350 - 380 with fixed torch
Supplier stock
DECA
Reference: DECA-GAL-MIGA
105.43 kr
105,43 kr tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA units:
MIGA 215 - MIGA 218 - MIGA 220
for welding wire:
Steel Ø 0.6 / flux-cored wire Ø 0.6 to 1.2* mm
Steel or stainless steel Ø 0.8 / 1** mm
* Flux-cored wire Ø 1.2 mm is possible with the MIGA 220 and MIGA 225XL units
For MIGA 215 and 218 models, flux-cored wire up to Ø 0.9 mm only.
** solid wire Ø1 mm steel or stainless steel is possible from the MIGA 220 unit
| Combinations | Price | |
| 79.26 kr | ||
| 105.43 kr | ||
DECA
Reference: 011252
105.43 kr
105,43 kr tax excl.
Fast delivery
2-year warranty
Reversible drive roller for aluminium wire Ø 0.8 / 1 mm for the DECA welding machines listed below:
MIGA 215 - MIGA 218 - MIGA 220
This drive roller should also be used with the MIGA 220 welding machine when welding with aluminium wire Ø 1.2 mm.
Available for order
DECA
Reference: 010764
71.69 kr
71,69 kr tax excl.
Fast delivery
2-year warranty
Crushing electrode to erase the weld tip created by the star
Available for order
DECA
Reference: DECA-GAL-JOB220-F
160.91 kr
160,91 kr tax excl.
or 3 x 53,64 kr
Free delivery
2-year warranty
The rollers listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for gasless welding wire
Ø 0.8 / 0.9 mm
Ø 0.9 / 1.2 mm
| Combinations | Price | |
| 160.91 kr | ||
| 160.91 kr | ||
Available for order
DECA
Reference: DECA-2GAL-JOB522-AL
297.37 kr
297,37 kr tax excl.
or 3 x 99,12 kr
Free delivery
2-year warranty
The drive rolls proposed below are compatible with the following DECA multi-process welding machines:
JOB 522 and 523 LAB
for aluminum welding wire
Ø 0.8 / 1 mm
Ø 1 / 1.2 mm
| Combinations | Price | |
| 297.37 kr | ||
| 297.37 kr | ||
Available for order
DECA
Reference: DECA-2GAL-JOB522
292.83 kr
292,83 kr tax excl.
or 3 x 97,61 kr
Free delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 522 and 523 LAB
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
| Combinations | Price | |
| 292.83 kr | ||
| 292.83 kr | ||
Available for order
DECA
Reference: DECA-GAL-JOB220-AL
124.36 kr
124,36 kr tax excl.
Free delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA machines:
JOB 220 LAB
MIGA 225 XL
for aluminum welding wire of diameter
0.8 / 1 mm
1 / 1.2 mm
| Combinations | Price | |
| 125.22 kr | ||
| 124.36 kr | ||
Available for order
DECA
Reference: 011224
373.93 kr
373,93 kr tax excl.
or 4 x 93,48 kr
Free delivery
2-year warranty
2 drive rollers for DECA multi-process machine reference JOB 522 or 523 LAB, for flux-cored welding wire (gasless) with diameter 0.8 to 1.2 mm.
DECA
Reference: KITBOUT
43.25 kr
43,25 kr tax excl.
Fast delivery
2-year warranty
This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.
It is suitable for DECA machines:
Decastar 135 EVO.
Startwin 135 EVO.
Supplier stock
DECA
Reference: DECA-GAL-JOB220
124.79 kr
124,79 kr tax excl.
Free delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
| Combinations | Price | |
| 124.79 kr | ||
| 124.79 kr | ||
DECA
Reference: 010673
40.55 kr
40,55 kr tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
| Combinations | Price | |
| 62.18 kr | ||
| 40.55 kr | ||
| 40.55 kr | ||
DECA
Reference: CDC-DECA
123.49 kr
123,49 kr tax excl.
Free delivery
2-year warranty
Swan neck for MIG-MAG DECA torch.
This product is a replacement accessory, it is not required when purchasing a new welder.
The swan neck reference must be selected according to your DECA welder reference:
Swan neck 010240 for DECA welders:
Decastar 130 and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Swan neck 010485 for DECA welders:
Decastar 150 E and 180 E
Decamig 180 E.
D-MIG 350 and 380 if your welder is fitted with a torch without EURO connection fixed to your welder.
Swan neck 010488 for DECA welders:
Decamig 2500
D-MIG 390 and 420S
JOB220 LAB -522-523
D-Mig 520T - 525T - 530S - 520SD -530SD - 525TD
MIGA 218- 220-225XL
Swan neck 010824 for DECA welder
MIGA 215
| Combinations | Price | |
| 123.49 kr | ||
| 150.52 kr | ||
| 116.68 kr | ||
| 118.08 kr | ||
Supplier stock
DECA
Reference: 010464
675.80 kr
750.89 kr
675,80 kr tax excl.
or 4 x 168,95 kr
Free delivery
2-year warranty
MIG torch for DECA welding machine using flux-cored wire (gasless) suitable for the following machines:
DECASTAR 130 AC
STARFLUX 130 AC
D-MIG 230
Length 2 m
140 A @ 60%
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
DECA
Reference: 010312
702.88 kr
702,88 kr tax excl.
or 4 x 175,72 kr
Free delivery
2-year warranty
Dent pulling lever + 3-hook claw DECA
Length 70 cm
Available for order
DECA
Reference: 010923
232.49 kr
232,49 kr tax excl.
or 3 x 77,50 kr
Free delivery
2-year warranty
Magnetic support for corrugated wires for dent puller (supplied without corrugated wire)
Supplier stock
DECA
Reference: 010382
76.56 kr
76,56 kr tax excl.
Fast delivery
2-year warranty
2 replacement outer lenses 138 x 122 mm for the LCD filter protection of the Deca welding helmet
This size is suitable for the following Deca LCD welding helmet models:
WM 35 and WM 35TC
WM40 TC
DECA
Reference: LENT
34.71 kr
34,71 kr tax excl.
Fast delivery
2-year warranty
2 external replacement lenses for the protection of the LCD filter on the DECA welding helmet
2 sizes available:
Dimensions: 107 x 90 mm.
for the DECA WM23- WM25 -WM28 welding helmet models
or
Dimensions: 134 x 114 mm.
for the DECA WM35 welding helmet model
Thickness 1 mm
| Combinations | Price | |
| 77.97 kr | ||
| 34.71 kr | ||
DECA
Reference: 010841
114.44 kr
114,44 kr tax excl.
Fast delivery
2-year warranty
This kit includes
1 roller for use with steel or stainless steel wire Ø 0.6 - 0.8 and 1 mm
1 roller for use with flux-cored wire Ø 0.8 - 0.9 and 1.2 mm
1 roller for use with aluminium wire Ø 0.8 and 1 mm
Supplier stock
DECA
Reference: 010470
1,432.79 kr
1 432,79 kr tax excl.
or 4 x 358,20 kr
Free delivery
2-year warranty
MIG torch for DECA brand machine suitable for models:
DECASTAR 140 - 150E and 180E.
DECAMIG 4180 E and DECAMIG 4190 E
D-MIG 350 - D-MIG 380 (if torch is fixed to the machine)
Length 2 m
160 A @ 60 %
This reference is a replacement accessory; it is not required when purchasing a new machine.
Available for order
DECA
Reference: DEST010339
10.84 kr
18.06 kr
10,84 kr tax excl.
Fast delivery
2-year warranty
Filter lens
Italy
Germany
Netherlands
Denmark
Ireland
Portugal
Spain
