Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Compatible with any MB15 type torch, this kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
10 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 nozzle springs
2 gas nozzles Ø 12 mm - Length 53 mm
Reference: MT0580
TRAFIMET |Accessory kit for MIG torch 150 A
245.81 kr
245,81 kr tax excl.
Supplier stock
Dispatched within 5 to 7 days
Compatible with any MB15 type torch, this kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
10 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 nozzle springs
2 gas nozzles Ø 12 mm - Length 53 mm
Customer reviews
Product reviews
-
Perfect
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Sacit
Reference: URANIA
(1 review)
297.16 kr
297,16 kr tax excl.
or 3 x 99,05 kr
Free delivery
2-year warranty
Lever electrode holder
Die-cast brass body
Insulating coating in non-flammable, heat-resistant thermosetting materials
Electrode clamping in 5 positions
URANIA 5 For cable cross-section 35 - 50 mm²
250 A @ 60% and 300 A @ 35% - For electrodes from 3.2 to 5 mm
URANIA 6 For cable cross-section 50-70 mm²
300 A @ 60% and 400 A @ 35% - For electrodes from 4 to 6.3 mm
In stock
Sacit
Reference: F11371
(2 reviews)
202.66 kr
202,66 kr tax excl.
or 3 x 67,55 kr
Free delivery
2-year warranty
Magnetic ground clamp 500 Amperes
Duty cycle 400 A @ 60% and 500 A @ 35%
Ideal for welding parts with a large flat surface
Maximum cable cross-section: 35-50 mm²
In stock
Gys
Reference: 042407
(8 reviews)
363.69 kr
363,69 kr tax excl.
or 4 x 90,92 kr
Free delivery
2-year warranty
2 double-groove drive rollers for GYS MIG-MAG welder for flux-cored wire Ø 0.9 and 1.2 mm
Compatible with GYS welders:
TRIMIG 200-4S, 250-4S and 300-4S
PROMIG 350-4S and 350-4S DUO DV
TF-4R
MULTIPEARL 200.4 XL and 201.4
W5S-4L
MONOGYS
In stock
Trafimet
Reference: MD0001
(26 reviews)
60.96 kr
60,96 kr tax excl.
Fast delivery
2-year warranty
These contact tips are available in 3 diameters: 0.6, 0.8 and 1 mm.
The Ø 1 mm diameter allows the use of flux-cored wire.
Thread M5
Length: 18 mm
These contact tips are intended in particular on our site for the Fox 160 and Panther 132 welding machines
In stock
Oxyturbo
Reference: 215310
(17 reviews)
235.76 kr
235,76 kr tax excl.
or 3 x 78,59 kr
Free delivery
2-year warranty
Flow meter for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O².
The maximum possible setting with this regulator is 6 liters per minute when fully open
M10 thread
Ridged fitting for hose with inner Ø 6.3 to 7.5 mm
We offer two models
- With one gauge to adjust the flow rate precisely
- With two gauges to check the fill level of the cylinder and adjust the flow rate precisely
Regulators accepting gas hoses with an inner diameter of 6.5 to 7.3 mm
Lincoln Electric
Reference: S33444
(2 reviews)
101.93 kr
101,93 kr tax excl.
Fast delivery
2-year warranty
These drive rolls are designed for Lincoln welder models in the BESTER 190C -Multi and 215MP range
4 drive rolls available depending on the Ø and type of wire to be welded:
For solid steel or stainless steel wire Ø 0.6 / 0.8 mm ( Lincoln reference S33444-20 )
For solid steel or stainless steel wire Ø 0.8 / 1 mm ( Lincoln reference S33444-21 )
For solid aluminium wire Ø 0.8/ 1 mm ( Lincoln reference S33444-22 )
For flux-cored wire Ø 0.9 / 1.2 mm ( Lincoln reference S33444-23 )
The drive roll is reversible; with one drive roll you have two possible wire diameters.
In stock
Oxyturbo
Reference: OXY215
(257 reviews)
363.25 kr
363,25 kr tax excl.
or 4 x 90,81 kr
Free delivery
2-year warranty
Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder
3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely
Regulators accepting gas hoses with 4 mm inner diameter
In stock
Telwin
Reference: 742054
(5 reviews)
141.15 kr
141,15 kr tax excl.
Free delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 1- 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic - 300 syn. - 230 - 330 wave-300 syn. -
MASTERMIG 220/2 - 270/2 - 300
TELMIG 281/2
In stock
Trafimet
Reference: MC0020
(15 reviews)
60.96 kr
60,96 kr tax excl.
Fast delivery
2-year warranty
This spot welding nozzle fits onto the end of your MIG torch and guides you in your spot welding work by allowing you to see your welding spot, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.
It is suitable for any torch brand with a duty cycle of 150A @ 60%
Length 61.5 mm
Diameter: 16 mm
In stock
Trafimet
Reference: MC0017
(3 reviews)
79.64 kr
79,64 kr tax excl.
Fast delivery
2-year warranty
This nozzle fits onto the end of your MIG torch
Its role is to direct the gas flow towards the weld and the molten wire.
Its small diameter allows work in tight spaces where room is limited.
In stock
GEKA
Reference: FIL-200.CORTEN
(26 reviews)
544.94 kr
544,94 kr tax excl.
or 4 x 136,24 kr
Free delivery
2-year warranty
CORTEN steel wire coil type 80 SG Ø 200 mm Weight 5 Kg
Standard AW A5.28 - ER 80S-G
Standard ISO 16834-A - G ZMn3Ni1 Cu
Wire section available: 0.8, 1 and 1.2 mm
The use of this welding wire requires the supply of gas (Argon + CO² mixture) during use.
In stock
Gys
Reference: 039483
(6 reviews)
172.50 kr
172,50 kr tax excl.
or 3 x 57,50 kr
Free delivery
2-year warranty
Drive roller for GYS MIG-MAG welding machine for steel or stainless steel wire of cross-section 0.6 and 0.8 mm.
Compatible with GYS welding machines:
Easymig: 110 - 130 and 140
Smartmig 110
Sparkmig 110
Neomig 130
Compatible with DECA welding machines:
Miga 215 - Miga 218 and Miga 220.
In stock
Trafimet
Reference: ME0517P
(1 review)
97.01 kr
97,01 kr tax excl.
Fast delivery
2-year warranty
5 ceramic gas diffusers for ERGOPLUS 36 and ERGOPLUS 36 Premium torch
In stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Aluminium
983.25 kr
983,25 kr tax excl.
or 4 x 245,81 kr
Free delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
In stock
A.T.I
Reference: 16500
(32 reviews)
35.94 kr
35,94 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Total brush length including handle 245 mm
Useful length 135 mm
In stock
Gys
Reference: 041523
207.14 kr
207,14 kr tax excl.
or 3 x 69,05 kr
Free delivery
2-year warranty
1 nail welding nozzle for 150 A torch
This nozzle fits onto the end of your torch as a replacement for the gas nozzle.
It allows you to weld studs for dent pulling on car bodywork.
Compatible with any MB15 type torch, this kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
10 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 nozzle springs
2 gas nozzles Ø 12 mm - Length 53 mm