Italy
Germany
Netherlands
Denmark
Ireland
Portugal
Spain
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Reference: 802955
Automatic plasma torch length 12 m - with consumables
8,499.66 kr
8 499,66 kr tax excl.
Supplier stock
Dispatched within 5 to 7 days
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Description
Important
The torch must be fitted with the correct consumables, chosen according to the application and the set current. A poor choice of consumable will cause cutting defects, premature wear of consumables and even malfunction of the entire unit.
Regularly check the wear condition of the protective nozzle, the tip and the electrode, or in the event of a significant reduction in cutting speed. It is recommended to replace the tip and electrode at the same time.
Consumables are wear parts; it is important to know when to replace them. Visually: melted or damaged consumables, nozzle holes>1.5mm, worn electrodes, melted pads… Practically: loss of cutting performance, difficult arc starting on workpiece, etc.
Regarding the nozzle: Tighten the nozzle so that all parts are firmly locked. The nozzle should not turn easily.
Use compressed air with oil and water filtration.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Save 20%
Available for order
Telwin
Reference: 804059
TELWIN - Compass kit for plasma cutter Technology XT series
1,353.33 kr
1,691.66 kr
1 353,33 kr tax excl.
or 4 x 338,33 kr
Free delivery
2-year warranty
This compass kit delivered in a case is suitable for the torches on the following plasma cutters:
Superior plasma 70
Superior plasma 100
Superior plasma 160
Supplier stock
Telwin
Reference: 804041
Manual plasma torch length 6 m - with consumables
5,360.90 kr
5 360,90 kr tax excl.
Free delivery
2-year warranty
This manual plasma torch TWIN PV is suitable for the TELWIN plasma cutter: Superior Plasma 70
It is supplied with a 70 A nozzle.
Length: 6 m
- PV torch for plasma cutting system with 4-metre cable (EURO connection).
- Maximum current 65 A@60% / 50 A@100%.
- Maximum cutting thickness 20 mm.
- Equipped with an air cooling system (pressure 5 bar and flow rate 200-220 litres/min).
Supplier stock
Gys
Reference: 037564
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
(5 reviews)
315.91 kr
315,91 kr tax excl.
or 4 x 78,98 kr
Free delivery
2-year warranty
5 electrodes 20/70 A for plasma torch MT-70 / AT-70
Available for order
Gys
Reference: 037984
Compass kit for Plasma torch MT70 - MT125
(1 review)
1,434.99 kr
1 434,99 kr tax excl.
or 4 x 358,75 kr
Free delivery
2-year warranty
The compass kit allows you to quickly and precisely cut circles up to 82 cm in diameter.
- Ideal for making circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches MT-70 and MT-125 A
- Premium quality.
Supplier stock
Gys
Reference: 037649
1 cutting deflector pad 20/70A for torch AT-70
(3 reviews)
234.25 kr
234,25 kr tax excl.
or 3 x 78,08 kr
Free delivery
2-year warranty
1 cutting deflector pad 20/70A for automatic torch AT-70
Available for order
Gys
Reference: 037618
GYS | Ohmic Detection Nozzle 20 / 70 A
(1 review)
785.18 kr
785,18 kr tax excl.
or 4 x 196,30 kr
Free delivery
2-year warranty
Ohmic detection nozzle 20 / 70 A designed for use with the Plasma torch reference AT-70
Supplier stock
Telwin
Reference: 802956
TELWIN- Consumable kit for plasma cutter Superior 100
1,525.20 kr
1 525,20 kr tax excl.
or 4 x 381,30 kr
Free delivery
2-year warranty
This kit for manual torch includes:
1 Skid
1 Electrode
1 Nozzle 85 A
1 Cup
1 Diffuser
This kit is suitable for TELWIN brand plasma cutters;
References:
SUPERIOR PLASMA 100
SUPERIOR PLASMA 160
Save 10%
Available for order
Trafimet
Reference: CV0024
Cutting guide carriage for plasma torch
(4 reviews)
252.74 kr
280.82 kr
252,74 kr tax excl.
or 3 x 84,25 kr
Free delivery
2-year warranty
Cutting guide carriage for plasma cutter torch
Compatible with TRAFIMET torches;
References:
Ergocut S 25K / S 35K / S 25
Ergocut S45
Supplier stock
Gys
Reference: 040212
10 nozzles for GYS Cutter 31 and 40 FV and 35KF-45CT plasma cutter torch
(8 reviews)
296.96 kr
296,96 kr tax excl.
or 3 x 98,99 kr
Free delivery
2-year warranty
10 nozzles for GYS plasma cutter torch
Models Cutter 31 - 40 FV - Easycut 40 and the model with integrated compressor Cutter 35KF - 45 CT
Available for order
Gys
Reference: 080799
GYS |10 nozzles for plasma cutter torch Cutter 35KF PFC
(1 review)
297.83 kr
297,83 kr tax excl.
or 3 x 99,28 kr
Free delivery
2-year warranty
10 nozzles for TPT35 type torch supplied with the GYS Cutter 35 K PFC plasma cutter
Available for order
Gys
Reference: 037601
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
(3 reviews)
426.92 kr
426,92 kr tax excl.
or 4 x 106,73 kr
Free delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
Available for order
Trafimet
Reference: PC01
4 shield nozzles for plasma cutter
(1 review)
608.43 kr
608,43 kr tax excl.
or 4 x 152,11 kr
Free delivery
2-year warranty
4 nozzles for Trafimet plasma cutter torch
Reference PC0135 fits in particular on the DECA IPAC 1235K plasma cutter available on our website.
Reference PC0116 fits in particular on the DECA IPAC 1235 plasma cutter available on our website and D-PAC 60
Available for order
Telwin
Reference: 804417
Consumable kit for Telwin 60 XT plasma cutter
(2 reviews)
893.48 kr
893,48 kr tax excl.
or 4 x 223,37 kr
Free delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
Available for order
Lincoln Electric
Reference: W03X0893-78R
Lincoln - 1 cutting guide for plasma cutter torch LC 25 or LC30
184.98 kr
184,98 kr tax excl.
or 3 x 61,66 kr
Free delivery
2-year warranty
Cutting guide for plasma cutter torches on the Lincoln Invertec PC 210 and Tomahawk 30K plasma cutters
This cutting guide is designed for torch models LC25 and LC30
Available for order
Gys
Reference: 039988
GYS - CNC interface kit for plasma cutter
(1 review)
2,969.29 kr
2 969,29 kr tax excl.
or 4 x 742,32 kr
Free delivery
2-year warranty
This CNC interface kit is installed between your Plasma cutter and a numerically controlled cutting table
This kit is compatible with Gys brand plasma cutters whose model names are listed below:
Plasma 45-70-85-105-125
Available for order
Gys
Reference: 080782
GYS | Accessories kit for plasma torch TPT35
487.35 kr
487,35 kr tax excl.
or 4 x 121,84 kr
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 tips Ø0.9 mm
- 3 electrodes
This kit is compatible with the TPT 35 torch model, notably used on the GYS Cutter 35K PFC plasma cutter
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m