Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
Remote control 1 potentiometer 5 m
Reference: 6185409
Kemppi remote control R10 5M
€405.90
330,00 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
Remote control 1 potentiometer 5 m
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
SILICONI
Reference: MOLISIL
SILICONI | MOLISIL welding torch protection
(2 reviews)
€9.18
7,46 € tax excl.
Fast delivery
2-year warranty
MOLISIL is used as an anti-spatter product to protect the torch "nozzle" against droplet adhesion.
It is a very effective anti-spatter because it contains MOS2 and graphite in slightly higher quantities than a standard anti-spatter product
(oil-based).
MOLISIL can also be used as a lubricant to lubricate moving mechanical parts, prevent friction and reduce wear. It is used for high-temperature lubrication.
500 ml aerosol can
INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve clogging.
SPECIFICATIONS
Base: Molybdenum disulphide and graphite
Propellant: Odourless denatured hydrocarbon.
Temperature resistance: 700°C
Appearance: Dry grey film
CFC-FREE CHLORINE-FREE
Available for order
Gys
Reference: GYS-GAL-B-ALUMINIUM
1 Type B roller for aluminium wire MIG welding GYS welder
€19.37
15,75 € tax excl.
Fast delivery
2-year warranty
1 double V-groove roller 35° for GYS MIG welder for solid aluminium wires, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibility:
• MONOGYS 200-2CS et 250-4CS
• TRIMIG 200-4S, 250-4S et 300-4S
• PROMIG 350-4S et 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL et 201.4
• CARMIG
• M1, M3, T1 et T3 GYS
• W5S-4L
Available for order
Soudexpert
Reference: TIG308L241
TIG Filler Metal - STAINLESS 308L Ø2.4 x 1000mm - 1 kg
€21.22
17,25 € tax excl.
Fast delivery
2-year warranty
TIG STAINLESS 308L filler metal rods
Diameter: 2.4 mm
Rod length: 1 metre
1 kg sleeve
1 kg is equivalent to +/- 28 rods
Requires the use of welding gas (pure Argon)
Ideal for direct current (DC) welding of austenitic stainless steels of type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L
Applications:
- Piping
- Tubes and vessels in petrochemistry
Supplier stock
Weldline
Reference: W000306205
Seat for electrode holder of PROTIG 10 or 10 W torch
€11.28
9,17 € tax excl.
Fast delivery
2-year warranty
This seat is required for use with any size of electrode holder for the PROTIG 10 and 10 W torch model.
This torch is found on Lincoln and SAFPRO brand welding machines.
Available for order
GEKA
Reference: TIG - CUsn12
TIG filler metal rods CuSn12 case 0.5 kg - bronze welding
€59.04
48,00 € tax excl.
Fast delivery
2-year warranty
TIG filler metal rods CuSn12 - ER5410
Diameter: 1.6 mm
Rod length: 1 metre
Sleeve of 0.5 kg
Requires use of welding gas (Argon)
Ideal for welding deoxidized copper and copper alloys, copper-tin alloys or castings, bronze, repair of cast bronze parts or the rebuilding of anti-friction surfaces and wear parts
Standards: AWS A5.7 ER CuSI-A
Supplier stock
Jelt
Reference: Jelt-58
Jelt cold galvanizing
(18 reviews)
€12.56
10,21 € tax excl.
Fast delivery
2-year warranty
3 products are available for 3 different results after application:
Galva Flash
The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance
Matt Galva
The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.
Gloss Galva
The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.
Supplier stock
GEKA
Reference: LOTUS
Geka|Lotus - RUTILE Electrodes for steel welding 1 kg pack
(3 reviews)
€9.99
8,13 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for steel welding
Supplied in a plastic case
Standard AWS A 5.1 - E 6013
Standard ISO 2560-A - E 42 0 RC11
The pack of Ø 2.5 mm electrodes contains 1 kg, i.e. 54 pieces, length 350 mm
The pack of Ø 3.2 mm electrodes contains 1 kg, i.e. 34 pieces. Length 350 mm
Available for order
SOUDO METAL
Reference: 170.00
Screw-type electrode holder 150 A
(2 reviews)
€9.74
7,92 € tax excl.
Fast delivery
2-year warranty
Screw-type electrode holder 150 Amperes
Duty cycle 200 A@35% - 150 A@ 60%
Compatible with rutile, basic or cellulosic electrodes from Ø 1.6 to 4 mm
Maximum cable cross-section: 35 mm²
Electrode locking by screw
RIGHT-hand thread
Full insulation
Compliant with standard EN-60-974-11
Available for order
Trafimet
Reference: MC0025
2 tack welding nozzles Ø 18 mm
€16.30
13,25 € tax excl.
Fast delivery
2-year warranty
This spot welding nozzle fits on the end of your MIG torch and guides you in your spot welding work by allowing you to see your weld point, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.
Suitable for Lincoln torches models LGS and LGP 250
Length: 68 mm
Diameter: 18 mm
Available for order
Gys
Reference: 042407
2 Type B drive rollers for flux-cored wire Ø 0.9-1.2 mm MIG welding GYS welder
(8 reviews)
€40.95
33,29 € tax excl.
Fast delivery
2-year warranty
2 double-groove drive rollers for GYS MIG-MAG welder for flux-cored wire Ø 0.9 and 1.2 mm
Compatible with GYS welders:
TRIMIG 200-4S, 250-4S and 300-4S
PROMIG 350-4S and 350-4S DUO DV
TF-4R
MULTIPEARL 200.4 XL and 201.4
W5S-4L
MONOGYS
Available for order
GEKA
Reference: TIGCUSI3
TIG filler metal rods CuSi3 pack 0.5 kg - copper-tin welding
(11 reviews)
€36.29
29,50 € tax excl.
Fast delivery
2-year warranty
TIG CuSi3 filler metal rods - ER6560
Diameter: from 1.2 to 3 mm
Rod length: 1 metre
Pack of 0.5 kg
Requires the use of welding gas (Argon)
Filler rod for TIG welding of thin sheet metal, particularly suited to automotive repair, galvanised sheets, low-alloy copper alloys, copper-zinc materials and hardfacing of steel and cast iron
Standards: AWS A 5.7 ER CuS1-A1 - ISO 24373S cU 6560 (CuSi3Mn1)
Available for order
Telwin
Reference: Crystal
TELWIN | 1 Crystal champagne glass nozzle
(1 review)
€27.63
22,46 € tax excl.
Fast delivery
2-year warranty
This transparent nozzle is compatible with TIG torches of type 17-18 and 26
2 electrode holder diameters available: 1.6 or 2.4 mm
Tungsten electrode not included
Supplier stock
BINZEL
Reference: W000278905
Flex-head torch for TIG welding SR 20L water-cooled for LINCOLN welding machine
€203.98
165,83 € tax excl.
or 3 x 67,99 €
Free delivery
2-year warranty
LINCOLN TIG SR20 L brand flex-head torch.
Length 8 M.
Water-cooled
Duty cycle:
DC = 220 A @ 100% - AC = 200 @ 100%
Usable tungsten electrode: diameter 0.5 to 3.2 mm.
5-pin connector Ø 35/50 mm
Light and easy to use, these torches offer ideal manoeuvrability for smooth, flexible welding. The moulded GRIP handle provides optimal grip for achieving the perfect weld. Combined with a TIG welding machine fitted with a water cooler, the SR 20 torch is particularly recommended for everyday welding work.
Available for order
Weldline
Reference: NETMIG
NET MIG - POT 300G
(20 reviews)
€11.78
9,58 € tax excl.
Fast delivery
2-year warranty
NETMIG is a paste that prevents welding spatter from adhering to nozzles or contact tips.
Does not clog orifices or threads
Does not cause porosity
Solvent-free, silicone-free and odourless.
Compatible with all MIG-MAG torches except fume extraction torches.
Volume 300g
Available for order
Sacit
Reference: KIT-242/245
Earth clamp 250 A + 16 mm² cable - 9 mm connector
(10 reviews)
€31.16
25,33 € tax excl.
Fast delivery
2-year warranty
Earth clamp 250 Amperes + 16 mm² cable 3 m long (kit-245) or 4 m long (kit-242)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 25 connector
Available for order
Trafimet
Reference: GM0512
Trafimet wire liner for MIG torch steel or stainless steel welding Length 5 M
€8.66
7,04 € tax excl.
Fast delivery
2-year warranty
Wire liner for steel or stainless steel wire - Length 5 m for wire Ø 1 and 1.2 mm.
Inner diameter 2 mm and outer diameter of the liner 4.6 mm
Remote control 1 potentiometer 5 m