Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Male / Male Coupler
Compatible with isocouple quick-release fittings 150380-150382-150-388
Reference: 150376
Male / Male ISOCOUPLE coupler
€7.02
5,71 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Male / Male Coupler
Compatible with isocouple quick-release fittings 150380-150382-150-388
Accessories for Male / Male ISOCOUPLE coupler
Customer reviews
Product reviews
-
Not yet tested
-
good quality of the chosen material
-
As described
-
meets my expectations very well.
-
Very good. As for the quick coupling. What is the O-ring used for?
-
Good material, fast delivery works perfectly
-
Not yet used but practical storage box
-
Good value for money.
-
Ras product conforms to the description
-
Practical for switching from an argon bottle to argon co2, no more wrench or pliers.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
DECA
Reference: CDC-DECA
(9 reviews)
€14.05
11,42 € tax excl.
Fast delivery
2-year warranty
Swan neck for MIG-MAG DECA torch.
This product is a replacement accessory, it is not required when purchasing a new welder.
The swan neck reference must be selected according to your DECA welder reference:
Swan neck 010240 for DECA welders:
Decastar 130 and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Swan neck 010485 for DECA welders:
Decastar 150 E and 180 E
Decamig 180 E.
D-MIG 350 and 380 if your welder is fitted with a torch without EURO connection fixed to your welder.
Swan neck 010488 for DECA welders:
Decamig 2500
D-MIG 390 and 420S
JOB220 LAB -522-523
D-Mig 520T - 525T - 530S - 520SD -530SD - 525TD
MIGA 218- 220-225XL
Swan neck 010824 for DECA welder
MIGA 215
Save 10%
In stock
DECA
Reference: 010464
(12 reviews)
€76.87
€85.41
62,50 € tax excl.
Fast delivery
2-year warranty
MIG torch for DECA welding machine using flux-cored wire (gasless) suitable for the following machines:
DECASTAR 130 AC
STARFLUX 130 AC
D-MIG 230
Length 2 m
140 A @ 60%
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
In stock
StrongHandTools
Reference: MFT10
(9 reviews)
€17.93
14,58 € tax excl.
Fast delivery
2-year warranty
The best way to position and tack pieces together
Suitable for different shapes, round, flat or angled metal surfaces.
Features 6 magnets
In stock
SOUDO METAL
Reference: MI-MPH35
(92 reviews)
€16.40
13,33 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg
In stock
Soudexpert
Reference: 486
(150 reviews)
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Disposable PURE Argon gas cylinder for aluminium welding in MIG-MAG mode or for welding all metals in TIG mode.
M10 Valve thread.
Capacity: 2.2 L Pressure 110 Bar: i.e. 220 Litres of welding gas
In stock
Sacit
Reference: GAMMA
(22 reviews)
€13.49
10,97 € tax excl.
Fast delivery
2-year warranty
Die-cast brass earth clamp
Copper strip shunt for optimum conductivity
Cable secured with malleable copper lamella and copper-plated steel cable clamp
GAMMA 0 For cable cross-section 16 - 25 mm²
150 A @ 60% and 200 A @ 35%
Opening: 45 mm
GAMMA 1 For cable cross-section 25 - 35 mm²
200 A @ 60% and 250 A @ 35%
Opening: 55 mm
GAMMA 2 For cable cross-section 50-70 mm²
400 A @ 60% and 500 A @ 35%
Opening: 65 mm
Klingspor
Reference: 358370
(6 reviews)
€9.74
7,92 € tax excl.
Fast delivery
2-year warranty
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm
In stock
Telwin
Reference: 742575
(2 reviews)
€10.21
8,30 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2
In stock
Oxyturbo
Reference: 245400
(8 reviews)
€91.23
74,17 € tax excl.
Fast delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².
They comply with and are designed according to standard EN 585/ISO 2503
Pressure gauge size: Ø 70 mm.
This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter
In stock
Trafimet
Reference: FB0117
(5 reviews)
€6.69
5,44 € tax excl.
Fast delivery
2-year warranty
2 Contact tip holders for ERGOPLUS 15 and ERGOPLUS 15 Premium torch
In stock
SOUDO METAL
Reference: F11805S
(21 reviews)
€7.68
6,24 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 295 grams
Steel handle with a total length of 27 cm.
In stock
Gys
Reference: 041226
(22 reviews)
€50.22
40,83 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 0.6 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 0.8 M6 aluminium
3 contact tip holders 150 A
5 nozzle springs
3 gas nozzles
In stock
Trafimet
Reference: ERGOPLUS-500
(1 review)
€186.55
151,67 € tax excl.
or 3 x 62,18 €
Free delivery
2-year warranty
ERGOPLUS 500 EURO TORCH Water-cooled.
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new double swivel joint,
- removable torch handle (included in all standard torch assemblies),
- cable assembly fitted with a new reduced surface friction, for smooth movement without snagging,
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- new rear housing to prevent crushing of water hoses,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Water cooling - 1.6 L/minute
Duty cycle 450 A @ 100% with mixed gas
For use with welding wire Ø 1 to 2.4 mm
Accepts M8 threaded contact tips
factory-equipped with a liner for steel or stainless steel wire Ø 1.2/1.6 mm and a 1.2 mm contact tip
In stock
Telwin
Reference: 804208
(29 reviews)
€10.25
8,33 € tax excl.
Fast delivery
2-year warranty
Quick connector for easy connection of the hose to the regulator and your welding machine
Compatible with TELWIN welding machines:
Technomig DUAL 150 - 180 -210 -215 -260
Technomig 240 Wave
Electromig 220 - 300 - 400 Synergic
Electromig 450 - 550 Synergic Aqua
Electromig 230- 330 and 430 Wave Aqua
Inverpulse 60.30 - 60.40 Wave Aqua
Superior 400 - 630 CE VRD
Supermig 380
Mastermig220/2 -270/2
Maxima 230 - 270 Synergic
Infinity TIG 225 DC-HF/LIFT VRD
Technology 230 DC HF/LIFT and 222AC/DC HF/LIFT vrd
Superior TIG 251 DC -252 AC/DC - 311 DC - 322 AC/DC - 421 DC - 422 AC/DC
In stock
Telwin
Reference: 802817
€97.38
79,17 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines: Technomig 215 Dual Synergic - Electromig 220 Synergic and 230 Wave
It includes:
1 wire liner guide - 1 wire feed roller 0.8 / 1 mm - 3 contact tips Ø 0.8 mm and 1 mm.
In stock
Gys
Reference: 041332
(40 reviews)
€37.82
30,75 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
Male / Male Coupler
Compatible with isocouple quick-release fittings 150380-150382-150-388