Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Reference: 00157A00
Pack of 5 aluminum plates
€18.04
14,67 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Accessories for Pack of 5 aluminum plates
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Supplier stock
Gys
Reference: 056992
€3,013.50
2 450,00 € tax excl.
or 4 x 753,38 €
Free delivery
2-year warranty
The POWERDUCTION 37LG induction unit provides immediate heating power for loosening, heating steel or aluminium. Light and portable, it can heat metal parts for several minutes without interruption thanks to its liquid cooling system.
The ideal tool in mechanics and maintenance:
• loosening steering tie rods (wheel alignment)
• removal of seized wiper blades, spare wheel carriers
• freeing seized bolts, steering ball joints without damaging the boot
• removal of seized driveshafts in the hub. • removal of car or HGV exhaust lines. • separation of bonded steel or aluminium components
Supplied complete, pre-assembled with 1 x 90° heating inductor
• Heating power: 3700 W, selectable in 250 W increments. Heats to the core of the metal, to a depth of 6 mm. Brings to red heat (approx. 1000°C)
Water cooling
Tank capacity: 1.5 L
• Safety and time saving: Immediate flameless heating on a precise area, allowing work near cables, pipes, or any heat-sensitive parts without dismantling them
• Portable unit: For use in hard-to-reach places. Supplied with a 2-metre induction cable
Supplier stock
Gys
Reference: 085206
€1,512.90
1 230,00 € tax excl.
or 4 x 378,23 €
Free delivery
2-year warranty
POWER PACK 14.22
In stock
Telwin
Reference: 722955
(1 review)
€17.32
14,08 € tax excl.
Fast delivery
2-year warranty
Washer Hook
In stock
Telwin
Reference: 802034
(2 reviews)
€199.88
162,50 € tax excl.
or 3 x 66,63 €
Free delivery
2-year warranty
This dent pulling kit for bodywork is used with the following Telwin welders:
Technomig 180 DUAL SYNERGIC and 180 EURO
Technomig 210 DUAL SYNERGIC - Technomig 215 DUAL SYNERGIC
Telmig 170/1-180/2-195/2-200/2-203/2-250/2-251/2
Mastermig 220/2-270/2
Electromig 220
It includes:
100 studs
1 puller
2 stud pointing nozzles
Supplier stock
Gys
Reference: 026322
€221.40
180,00 € tax excl.
or 3 x 73,80 €
Free delivery
2-year warranty
GYSPACK AIR
Save 20%
In stock
Gys
Reference: 056923
(1 review)
€404.88
€506.10
329,17 € tax excl.
or 4 x 101,22 €
Free delivery
2-year warranty
The Hand-Duction is designed to heat, loosen and easily remove all mechanical parts in a matter of seconds: seized bolts/nuts, screws...etc. It is particularly recommended in the automotive, agricultural, industrial and construction industry sectors
An ergonomic tool
Lightweight, it weighs only 2.54 kg
Its pistol shape provides an excellent grip
Equipped with an LED at its tip, it illuminates the area to be heated
Easy to use, simply plug it in and use it
With a power of 1000 W, the Hand-Duction also features an air cooling circuit. ... WHICH OFFERS A CONSIDERABLE TIME SAVING
A considerable time saving
Immediate flameless heating on a precise area, allowing work close to cables, pipes, or any heat-sensitive part without removing them
Supplied with three inductors, it can be adapted to all kinds of parts. Changing the inductor is very simple via a locking/unlocking system at the end of the product
Save 10%
Supplier stock
Telwin
Reference: 829564
€85.07
€94.53
69,17 € tax excl.
Fast delivery
2-year warranty
Multifunction 12V lithium jump starter and power bank. Equipped with: USB A output for recharging electronic devices (smartphones, tablets, etc.); USB C input for recharging the device; high-intensity LED lamp with thre
Supplier stock
Gys
Reference: 056329
€30.75
25,00 € tax excl.
Fast delivery
2-year warranty
JUMP START CABLES 320A - 16MM2 - 3M
In stock
STANZANI
Reference: 010958
(5 reviews)
€5.54
4,50 € tax excl.
Fast delivery
2-year warranty
Crimped wires for dent puller
Pack of 10 50 pieces
Length 28 cm
In stock
Gys
Reference: 053922
(6 reviews)
€36.38
29,58 € tax excl.
Fast delivery
2-year warranty
This kit includes:
- 20 copper-protected nail-puller stars
- 1 washer electrode
- 50 washers
- 1 earth hook
- 1 carbon electrode
Supplier stock
Gys
Reference: 081000
€1,987.47
1 615,83 € tax excl.
or 4 x 496,87 €
Free delivery
2-year warranty
The CAPATEK 66 FV is an industrial capacitor discharge stud welder with drawback, capable of welding studs from M3 to M8 in copper-coated steel, stainless steel, aluminum and brass onto thin sheet metal without marks or deformation. Its ergonomic and revolutionary gun with adjustable drawback and force ensures an ultra-fast welding rate. Its "FV" technology allows it to be used on all single-phase networks (85 to 265 V).
MAXIMUM PRODUCTIVITY
66 mF capacitor discharge.
Recharge time from 0 to 5 s.
Wide choice of studs, from M3 to M8.
Compatible stud length: 6 to 40 mm.
CONTACT GUN
Adjustable force from 25 to 100 N with cover to prevent accidental adjustments.
Independent tripod design with bayonet locking for better gun stability during welding and to facilitate mandrel installation
Trigger for easy control of the welding action.
LED lighting for the welding area. Unique on the market, several functions:
- Fast LED flash: error, machine under load.
- Slow LED flash: preset stud count reached.
INTUITIVE INTERFACE
Voltage adjustment from 50 V to 200 V.
Settings lock.
Stud counter with adjustable threshold (incremental or decremental).
INDUSTRIAL DESIGN
Protected against overvoltages up to 400 V (PROTEC 400)
Reinforced casing with anti-shock pads on all external faces
Easy welding polarity change via 35/50 bayonet connector
Delivered with two split earth clamps to prevent magnetic arc blow effects
Handle with integrated mains cable winder
Automatic standby mode
ON/OFF switch located at the rear of the machine
Active ventilation as needed
Supplier stock
Gys
Reference: 080935
€189.63
154,17 € tax excl.
or 3 x 63,21 €
Free delivery
2-year warranty
Supplier stock
Gys
Reference: 029460
€107.01
87,00 € tax excl.
Fast delivery
2-year warranty
GYSFLASH 6.24
In stock
DECA
Reference: 010764
€8.15
6,63 € tax excl.
Fast delivery
2-year warranty
Crushing electrode to erase the weld tip created by the star
In stock
Telwin
Reference: 6900
(6 reviews)
€6.92
5,63 € tax excl.
Fast delivery
2-year warranty
Straight electrode Ø 12mm for Telwin spot welder
Modular 20/TI
Modular 230 and 400
Supplier stock
Reference: 079687
€356.70
290,00 € tax excl.
or 4 x 89,18 €
Free delivery
2-year warranty
EV CHARGING CABLE T2/T2 5M - 32A1PH