Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Crimped wires for dent puller
Pack of 10 50 pieces
Length 28 cm
Reference: 172D
Crimped wires for dent puller
€5.54
4,50 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Crimped wires for dent puller
Pack of 10 50 pieces
Length 28 cm
Customer reviews
Product reviews
-
Very good
-
FAST DELIVERY IN ACCORDANCE WITH ORDER
-
very good
-
Very well matches the description
-
excellent welding machine for welding and light
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
STANZANI
Reference: 010990
(1 review)
€5.13
4,17 € tax excl.
Fast delivery
2-year warranty
Bag of 10 or 50 notched flat washers for dent puller
Supplier stock
Gys
Reference: 085206
€1,512.90
1 230,00 € tax excl.
or 4 x 378,23 €
Free delivery
2-year warranty
POWER PACK 14.22
Supplier stock
Reference: 072411
€59.04
48,00 € tax excl.
Fast delivery
2-year warranty
SOLAR BATTERY MAINTENANCE KIT 4.5W
Save 10%
Supplier stock
Telwin
Reference: 829574
€188.60
€209.56
153,33 € tax excl.
or 3 x 62,87 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Wireless i
Supplier stock
Telwin
Reference: 835012
(1 review)
€1,225.04
996,00 € tax excl.
or 4 x 306,26 €
Free delivery
2-year warranty
This induction heating system allows in particular to:
- Remove all adhesives, logos, strips, mouldings
- Remove bonded glazing while preserving the trim (rear window, quarter window, panoramic roof…)
- Remove anti-gravel coatings and seals
- Loosen and free mechanical parts (bolts, screws, spark plugs, injectors…)
- Remove minor dents from bodywork without needing to repaint (hail damage)
It is particularly suitable for bodywork and guarantees considerably reduced intervention times
It intelligently and completely automatically adjusts its intensity (Smart Power) using an innovative AutoCheck microprocessor system
Using the principle of electromagnetic induction, it can transfer a large amount of heat to a specific area (Smart Protection) in just a few seconds. In this way, glass, rubber, plastic and painted surfaces are not damaged in the area being treated or even in the surrounding areas
Delivered with bolt heater for Ø m8/m10 and M12/M14
In stock
STANZANI
Reference: 00175000
(1 review)
€90.20
73,33 € tax excl.
Fast delivery
2-year warranty
Dent pulling lever for quick and cost-effective repair of small dents on your bodywork
In stock
Telwin
Reference: 803153
(11 reviews)
€227.55
185,00 € tax excl.
or 3 x 75,85 €
Free delivery
2-year warranty
2 straight arms length 350 mm Ø 25 mm + 2 angled electrodes Ø 12mm for Telwin spot welder
In stock
Gys
Reference: 049468
(2 reviews)
€8.55
6,95 € tax excl.
Fast delivery
2-year warranty
5 carbon electrodes sheet metal heating Ø 10 mm Length 300 mm
Weight 200 grams (set of 5)
Supplier stock
Gys
Reference: 081000
€1,987.47
1 615,83 € tax excl.
or 4 x 496,87 €
Free delivery
2-year warranty
The CAPATEK 66 FV is an industrial capacitor discharge stud welder with drawback, capable of welding studs from M3 to M8 in copper-coated steel, stainless steel, aluminum and brass onto thin sheet metal without marks or deformation. Its ergonomic and revolutionary gun with adjustable drawback and force ensures an ultra-fast welding rate. Its "FV" technology allows it to be used on all single-phase networks (85 to 265 V).
MAXIMUM PRODUCTIVITY
66 mF capacitor discharge.
Recharge time from 0 to 5 s.
Wide choice of studs, from M3 to M8.
Compatible stud length: 6 to 40 mm.
CONTACT GUN
Adjustable force from 25 to 100 N with cover to prevent accidental adjustments.
Independent tripod design with bayonet locking for better gun stability during welding and to facilitate mandrel installation
Trigger for easy control of the welding action.
LED lighting for the welding area. Unique on the market, several functions:
- Fast LED flash: error, machine under load.
- Slow LED flash: preset stud count reached.
INTUITIVE INTERFACE
Voltage adjustment from 50 V to 200 V.
Settings lock.
Stud counter with adjustable threshold (incremental or decremental).
INDUSTRIAL DESIGN
Protected against overvoltages up to 400 V (PROTEC 400)
Reinforced casing with anti-shock pads on all external faces
Easy welding polarity change via 35/50 bayonet connector
Delivered with two split earth clamps to prevent magnetic arc blow effects
Handle with integrated mains cable winder
Automatic standby mode
ON/OFF switch located at the rear of the machine
Active ventilation as needed
Supplier stock
Gys
Reference: 023253
€73.80
60,00 € tax excl.
Fast delivery
2-year warranty
TCB 60 Charger - 12V
In stock
Telwin
Reference: 823017
€1,100.85
895,00 € tax excl.
or 4 x 275,21 €
Free delivery
2-year warranty
This portable spot welding system is the ideal tool for assembling thin mild steel sheets such as metal furniture or vehicle restoration
Thanks to the selection of the thickness of the sheets to be assembled, the portaspot defines the optimal current and spot welding time. You can also manually adjust this spot welding time
It allows the assembly of sheets from 0.6 + 0.6 mm up to 2.0 + 2.0 mm
The spot mode is continuous or pulsed depending on the type of sheet
It features clamping force adjustment on the arm and has a handle made of thermal insulating material
Its power supply is three-phase 400 V and requires for its operation an electrical line controlled by a 16 A fuse
Supplied with the standard 120 mm arm
Welder weight 10.5 kg
The arms of this device have a diameter of 20 mm and the electrodes have a diameter of 12 mm
Supplied without power plug.
Supplier stock
STANZANI
Reference: 00171A00
€155.80
126,67 € tax excl.
or 3 x 51,93 €
Free delivery
2-year warranty
Aluminum hammer head, jaw pull width 45 mm
This tool allows repairs in hard-to-reach positions
Compatible with steel or aluminum plates (3 sizes for each material available on the site)
Weight 3.7 kg
In stock
Telwin
Reference: 802034
(2 reviews)
€199.88
162,50 € tax excl.
or 3 x 66,63 €
Free delivery
2-year warranty
This dent pulling kit for bodywork is used with the following Telwin welders:
Technomig 180 DUAL SYNERGIC and 180 EURO
Technomig 210 DUAL SYNERGIC - Technomig 215 DUAL SYNERGIC
Telmig 170/1-180/2-195/2-200/2-203/2-250/2-251/2
Mastermig 220/2-270/2
Electromig 220
It includes:
100 studs
1 puller
2 stud pointing nozzles
In stock
Telwin
Reference: 6900
(6 reviews)
€6.92
5,63 € tax excl.
Fast delivery
2-year warranty
Straight electrode Ø 12mm for Telwin spot welder
Modular 20/TI
Modular 230 and 400
Supplier stock
Telwin
Reference: 803045
(1 review)
€854.85
695,00 € tax excl.
or 4 x 213,71 €
Free delivery
2-year warranty
This arm kit is compatible with Telwin spot welder models
Digital 7000 - Digital 9000 and 9000 qua
Modular 230 and 400
It includes arm kits XA3 - XA4 - XA6 - XA 7 AND XA9
Crimped wires for dent puller
Pack of 10 50 pieces
Length 28 cm