Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
This cooling unit is intended for use with the Lincoln Aspect 200 AC/DC TIG welder equipped with a water-cooled torch
Reference: K14190-1
LINCOLN COOL ARC 24 cooling unit
€1,429.88
1 162,50 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
This cooling unit is intended for use with the Lincoln Aspect 200 AC/DC TIG welder equipped with a water-cooled torch
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
DECA
Reference: 010673
(35 reviews)
€4.61
3,75 € tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
In stock
GEKA
Reference: 010830
(5 reviews)
€80.97
65,83 € tax excl.
Fast delivery
2-year warranty
UHSS* steel wire.
Wire spool Ø 200 mm. Weight 5 KG - Wire Ø: 0.8 mm
UHSS (Ultra High Strength Steel) wire. UHSS steel is particularly used in bodywork. This material makes it possible to reduce thickness and weight while preserving extreme robustness and collision resistance of components.
Classification of this wire: AWS/ASME SFA-5.28: ER 120 S-G
Standard ISO 16834 W Mn4Ni2.5CrMo
Pure Argon shielding gas
*Ultra High Strength
In stock
Soudexpert
Reference: ET-150-10G
€19.47
15,83 € tax excl.
Fast delivery
2-year warranty
Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 1.0 mm
Very good performance in DC welding
Suitable for thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys
Use at high amperages is not recommended as Cerium oxides will escape, thus cancelling their benefits.
In stock
Sacit
Reference: URANIA
(1 review)
€33.46
27,20 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder
Die-cast brass body
Insulating coating in non-flammable, heat-resistant thermosetting materials
Electrode clamping in 5 positions
URANIA 5 For cable cross-section 35 - 50 mm²
250 A @ 60% and 300 A @ 35% - For electrodes from 3.2 to 5 mm
URANIA 6 For cable cross-section 50-70 mm²
300 A @ 60% and 400 A @ 35% - For electrodes from 4 to 6.3 mm
Supplier stock
GEKA
Reference: TIG - CUsn12
€59.04
48,00 € tax excl.
Fast delivery
2-year warranty
TIG filler metal rods CuSn12 - ER5410
Diameter: 1.6 mm
Rod length: 1 metre
Sleeve of 0.5 kg
Requires use of welding gas (Argon)
Ideal for welding deoxidized copper and copper alloys, copper-tin alloys or castings, bronze, repair of cast bronze parts or the rebuilding of anti-friction surfaces and wear parts
Standards: AWS A5.7 ER CuSI-A
In stock
SILICONI
Reference: ZINCOSIL 430
€6.92
5,63 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.
400 ml aerosol
PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.
SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance
Supplier stock
Trafimet
Reference: MC0527P
(1 review)
€12.72
10,34 € tax excl.
Fast delivery
2-year warranty
2 gas nozzles Ø 16mm
Length 84 mm.
This nozzle fits onto the end of your MIG 350 A torch
Its role is to direct the gas flow towards the weld and the molten wire.
Suitable for machines equipped with a 320 A @ 60% torch
In stock
GEKA
Reference: 4043
(1 review)
€100.96
82,08 € tax excl.
Fast delivery
2-year warranty
Metal case containing 2 kg of vacuum-packed aluminium electrodes.
Standard AWS A5.3 / 4043
Standard TS 9604 / EL AlSli 5
The Ø 2.5 mm electrode pack contains 112 pieces - Length 350 mm
The Ø 2.5 mm electrode pack contains 70 pieces - Length 350 mm
Before ordering these electrodes, make sure your MMA (stick) welding machine is capable of welding aluminium.
This is not possible with all machines. Please check with the manufacturer or the instruction manual in your possession before purchasing.
These rods are sold in a vacuum-sealed case: no returns will be accepted
Supplier stock
Weldline
Reference: W0306
€13.12
10,67 € tax excl.
Fast delivery
2-year warranty
Pack of 2 ceramic nozzles for TIG torch PROTIG 10 and 10 W
This PROTIG 10 torch is found on welding machines from Lincoln or Safpro brands
Nozzles with diameter 10 and 12 are short while the nozzle with diameter 9.6 is long
Jelt
Reference: 5090
(72 reviews)
€7.12
5,79 € tax excl.
Fast delivery
2-year warranty
The active ingredient of the SOUDURE ANTI-GRATTONS is effective over time and benefits from high anti-adhesion properties that prevent the adhesion of metal spatter and weld spatters on welding torch nozzles or any surfaces near the work area. Formulated without chlorinated or petroleum solvents, the SOUDURE ANTI-GRATTONS is neither toxic nor irritating.
Thanks to its specific water-based formulation, the SOUDURE ANTI-GRATTONS is non-flammable, releases no unpleasant odour and generates neither smoke nor dangerous vapours for the user during welding operations. The SOUDURE ANTI-GRATTONS is 92% biodegradable.
The SOUDURE ANTI-GRATTONS rinses off very easily with water and contains corrosion inhibitors. Silicone-free, it is compatible with post-finishing operations and can be used on surfaces that are to be painted, bonded or varnished.
The SOUDURE ANTI-GRATTONS is particularly recommended when you want to avoid any trace of grease on metal surfaces. It also facilitates the demoulding of parts made of polyurethane, polyester, epoxy, various plastics or rubber moulded by injection, compression or casting.
SOUDURE ANTI GRATTONS Silicone-free water-based anti-adhesion spray
MAIN CHARACTERISTICS
• Water-based formula without chlorinated or petroleum solvents
• Prevents the adhesion of molten metal spatter: welding spatter.
• Non-flammable
• Easy removal of welding spatter by simple brushing
• Transparent film in the form of micro-droplets
• Long-lasting protection
• Releases no vapour or smoke
• No unpleasant odour • Mould release action
• Contains a corrosion inhibitor
• Very easy removal of the SOUDURE ANTI GRATTONS film
• Silicone-free to facilitate post-finishing operations
FIELDS OF APPLICATION
• Protection of the welding station environment
• Protection of parts before welding
• Nozzle, soldering iron tip
• Welding robots
• Steel or aluminium moulds • Mould release agent for plastic injection moulding
In stock
DECA
Reference: DECA-GAL-JOB220-AL
€14.15
11,50 € tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA machines:
JOB 220 LAB
MIGA 225 XL
for aluminum welding wire of diameter
0.8 / 1 mm
1 / 1.2 mm
In stock
SILICONI
Reference: PROTECT 700
(1 review)
€56.27
45,75 € tax excl.
Fast delivery
2-year warranty
PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.
Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.
INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS
It is also possible to apply this anti-spatter product with a brush on the surface to be treated.
In stock
Soudexpert
Reference: ET-150-10V
€17.43
14,17 € tax excl.
Fast delivery
2-year warranty
Box of 10 Pure Tungsten Green WP electrodes - PUR
Electrode diameter: Ø 1.0 mm
For aluminium welding with alternating current
No sharpening required
Operating range from 5 to 50 Amperes
Maximum operating power: 50 Amperes
In stock
Gys
Reference: 039483
(6 reviews)
€19.42
15,79 € tax excl.
Fast delivery
2-year warranty
Drive roller for GYS MIG-MAG welding machine for steel or stainless steel wire of cross-section 0.6 and 0.8 mm.
Compatible with GYS welding machines:
Easymig: 110 - 130 and 140
Smartmig 110
Sparkmig 110
Neomig 130
Compatible with DECA welding machines:
Miga 215 - Miga 218 and Miga 220.
In stock
GEKA
Reference: ELOX R316L
(10 reviews)
€36.75
29,88 € tax excl.
Fast delivery
2-year warranty
Rutile electrodes for welding unstabilised austenitic stainless steels of type 18/8/3.
Supplied in a plastic case.
Standard AWS A 5.4 - E 316-16
Standard ISO 3581-A - E 19 12 3 L R 12
The Ø 2 mm electrode pack contains 0.7 kg, i.e. 104 pieces. Length 250 mm
The Ø 2.5 mm electrode pack contains 1 kg, i.e. 64 pieces. Length 300 mm
The Ø 3.2 mm electrode pack contains 1 kg, i.e. 27 pieces. Length 300 mm
In stock
Gys
Reference: AWAG
€29.99
24,38 € tax excl.
Fast delivery
2-year warranty
Two sizes are available
These adapters are designed to be used with the WAG 40 sharpener
045446 for tungsten electrodes Ø 1 mm
722050 for tungsten electrodes Ø 1.6 mm
045453 for tungsten electrodes Ø 2 mm
This cooling unit is intended for use with the Lincoln Aspect 200 AC/DC TIG welder equipped with a water-cooled torch