Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
- -40%
Filter lens
Reference: DEST010339
Filter lens
€2.05
€1.23
1,00 € tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
Filter lens
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Save 10%
Available for order
Gys
Reference: 065109
GYS MULTIPEARL 210-4 XL Welding Machine
(16 reviews)
€1,286.37
€1,429.30
1 045,83 € tax excl.
or 4 x 321,59 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating
Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls
TIG torch optional
Save 30%
Available for order
TOTAL
Reference: 40012
Fast charger TFCLI20411E | 20 V
€22.55
€32.21
18,33 € tax excl.
Fast delivery
2-year warranty
20 V fast battery charger. Charging amperage: 4 Ah. Charging time for 2 Ah battery: 1/2 h. Compatible with all TOTAL 20 V batteries.
TOTAL 40012 | Fast charger TFCLI20411E | 20 V
Save 20%
Available for order
TOTAL
Reference: 41827
Brushless 1/2'' impact wrench battery-powered TIWLI20236E | 20 V
€101.48
€126.85
82,50 € tax excl.
Fast delivery
2-year warranty
2-in-1 brushless impact wrench with 20 V battery. Brushless motor. 1/2'' insert. Integrated 1/4'' hex insert. No-load speed 0-2000 / 0-2400 / 0-2600 rpm. Impact rate 0-2100 / 0-2500 / 0-2900 bpm. Tightening torque 230 Nm. LED work light. Accessories included. With 2 x 2 Ah batteries and charger. With carrying case.
The TIWLI20236E impact wrench runs on a 20 V battery with a brushless motor for better efficiency. It features a dual drive: 1/2'' square and 1/4'' hex. Three speeds (0-2000 / 0-2400 / 0-2600 rpm) and up to 2900 bpm. Max torque of 230 Nm. Supplied with LED, 2 x 2 Ah batteries, charger, accessories and carrying case.
Save 10%
Available for order
ESAB
Reference: 0700301092
ESAB | Multi-process welder ROGUE EMP 210 PRO
(6 reviews)
€1,531.35
€1,701.50
1 245,00 € tax excl.
or 4 x 382,84 €
Free delivery
2-year warranty
The ESAB Rogue EMP 210 PRO is a multi-process INVERTER technology welding machine designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system offers industrial-level arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics to suit the material being welded.
Weighing only 16.7 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.
True multi-process unit with Synergic MIG, Manual MIG, MIG brazing, flux-cored, Lift TIG and MMA (including 6010) processes
The 5.0" TFT screen is intuitive and clear, allowing the welder easy adjustment and a quick learning curve.
Synergic welding programs: complete range of welding parameters, 0.5 to 10.0 mm with a single control knob
Power Factor Correction (PFC): ensures a stable arc, resistant to mains voltage fluctuations, even when working with long extension cords up to 100 m
Unique robust industrial design: multiple handles for easy handling and cable management
Arc dynamics: precise adjustment of arc characteristics for a crisp / stable arc for carbon steel or a fluid / soft arc for stainless steel
Jobs: ability to save / recall up to 10 operations
Compliant with IP23S standard for indoor / outdoor use
Applications
Automotive construction
Automotive bodywork
Agricultural equipment
Civil engineering
Mechanical contractors
Repair and maintenance
Light fabrication
Package contents:
1 Multi-process welding machine 210 A with 3 m power cable and 16 A plug
1 MIG torch MXL 201, 3 m with Euro connector, with 1 contact tip for steel or stainless steel wire Ø 0.8 mm
1 Ground clamp with 3 m cable, OKC 35-50 16 mm2.
1 Electrode holder, Handy 200 A, heavy-duty 50 mm OKC, with 3 m cable.
1 Gas hose 4.5 m with quick connector.
1 Ø 200 mm spool of ESAB OK AristoRod steel wire 0.8 mm, weight 1 kg
1 Feed roller 0.6 / 0.8 mm (fitted on the machine) + 1 roller 0.8 / 1 mm for steel or stainless steel wire.
1 roller 0.8 / 0.9 mm for flux-cored wire
1 roller 1 / 1.2 mm for aluminum wire
1 nozzle for flux-cored wire (gasless) + 1 contact tip Ø 0.8 mm and 1 contact tip Ø 0.9 mm
1 user manual and safety instructions.
Save 20%
Available for order
Kemppi
Reference: 6102150
KEMPPI - MINARC 150 | MMA Inverter Welding Unit
(3 reviews)
€712.38
€890.47
579,17 € tax excl.
or 4 x 178,10 €
Free delivery
2-year warranty
Key features of the Kemppi Minarc Evo 150:
The little giant of MMA welding by Kemppi
Excellent welding and arc-striking quality
Automatic dynamic function
Compatible with long power cables
High duty cycle: 140A@35%
Lightweight and portable - 4kg
Generator compatible
Made in Finland
2-year warranty
This unit is delivered with:
1 electrode holder + cable (length 3m, cross-section 16 mm²)
1 earth clamp + cable (length 2m, cross-section 16 mm²)
1 power cable with plug, length 3m with Schuko plug
Save 5%
Available for order
Kemppi
Reference: Kemppi Minarc 223 AC/DC Tig
KEMPPI |MINARC T 223 AC / DC TIG welder
€3,683.85
€3,877.73
2 995,00 € tax excl.
or 4 x 920,96 €
Free delivery
2-year warranty
Welding and pickling with a single TIG machine
The Minarc T223 AC/DC is a brand new single-phase 220 A AC/DC TIG welding unit, integrating an electrolytic weld pickling process.
The Minarc T223 AC/DC includes standard and pulsed welding functions, as well as memory channels and remote control options.
The adjustment controls are easy to use, and the large, clear color screen features a protective cover against impacts.
The new MAX Weldclean process is simple and quick to use.
Converting the TIG torch to pickling mode takes only a few moments. Your welds are clean, ready and perfect faster.
You weld, clean the welds with a low current and a cleaning solution, then neutralize with water.
The unit comes with:
- a TX225G torch with a length of 4 m
- A ground clamp + cable
Save 30%
TOTAL
Reference: 41825
Brushless battery-powered hammer drill TIDLI20558 | 20 V
€132.23
€188.90
107,51 € tax excl.
Free delivery
2-year warranty
20 V brushless battery-powered hammer drill. Brushless motor. Maximum tightening torque of 55 Nm. Metal and self-locking chuck with capacity up to 13 mm. 22 tightening positions, one drilling position and one hammer position. No-load speed 0-500 / 0-2000 rpm. Impact rate 30,000 bpm. 2 speeds. LED light. Includes 2 x 2Ah batteries, charger and accessories. With carrying case.
Save 10%
Available for order
Telwin
Reference: 816076
TELWIN - DUAL 240 WAVE Synergic | MIG MAG semi-automatic welder
(3 reviews)
€1,932.28
€2,146.98
1 570,99 € tax excl.
or 4 x 483,07 €
Free delivery
2-year warranty
Multi-process machine allowing MMA - MIG - TIG welding.
Multi-process MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine controlled by microprocessor.
The WAVE OS system makes welding operations: customisable according to user requirements; traceable and analysable, thanks to data recording on USB; simplified, thanks to synergic parameter adjustment and the presence of specific programs for materials to be welded.
Features:
- 55 customisable programs,
- continuous and pulsed operation,
- user-friendly interface with colour TFT screen,
- Wave OS operating system with pulsed welding programs for specific materials (AB Pulse for aluminium and galvanised sheet metal) and low heat input for thin thicknesses (ATC).
Supplied with 250 A torch length 3 m duty cycle 200 A@60%, and earth clamp + cable 3 m
Save 50%
Available for order
Soudexpert
Reference: PE-200IT
ITALIAN 200A Electrode Holder
€5.07
€10.15
4,13 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder 200 Amperes
For electrodes Ø 1.6 to 3.2 mm
Fully insulated head and handle
2 electrode positions: 90° for flat welding and 45° for positional work
Maximum cable cross-section: 25 mm²
Cable secured by hexagonal nuts
Current capacity: 200 A
Duty cycle: 200 A at 35% and 150 A at 60%
Compliant with standard EN-60-974-11
Save 10%
Available for order
Telwin
Reference: 816060
TELWIN - ELECTROMIG 230 WAVE| Semi-automatic MIG MAG welding machine
€2,045.04
€2,272.26
1 662,66 € tax excl.
or 4 x 511,26 €
Free delivery
2-year warranty
Multi-process Synergic Inverter welding machine with an adjustment range of 10 to 240 A enabling the following welding processes:
1) Semi-automatic (welding wire) MIG-MAG, supports the use of steel, stainless steel, aluminium, brazing wire (special for automotive sheet metal) with the appropriate gas, and flux-cored wire for welding steel without gas.
The PULSE process guarantees high execution speed, excellent penetration and cleanliness, as well as welding in all positions.
This process is particularly recommended for welding thin aluminium and stainless steel.
Wire driven by a motor with 4 drive rolls.
The ROOT-MIG process makes it easier to weld sheet metal edge-to-edge, even with wide gaps (also in TIG welding mode).
2) Basic and rutile electrode rods from Ø 1.6 to 6 mm. (electrode holder optional)
3) Lift TIG start for welding steel, stainless steel and ferrous alloys. (TIG torch optional).
The ATC process is highly effective when welding thin materials (0.5 - 0.8 mm), as it reduces metal distortion caused by heat build-up.
The price includes in addition to the machine:
1 MIG/MAG torch 250A with a length of 3 m fitted with a 0.8 mm contact tip.
1 reversible drive roll for steel wire 0.6 / 0.8 mm (mounted on the machine).
1 earth clamp and cable
Save 10%
Available for order
ESAB
Reference: 0705002008
ESAB - ROGUE ES 181i - MMA Inverter welding machine
(6 reviews)
€445.88
€495.42
362,50 € tax excl.
or 4 x 111,47 €
Free delivery
2-year warranty
Why choose the Rogue ESAB ES 181i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 170A @20%
Compact and powerful: 10–180A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height
Save 10%
Available for order
Gys
Reference: 066595
GYS - MULTIWELD 200M welding machine - WITH ACCESSORIES
€1,019.88
€1,133.20
829,17 € tax excl.
or 4 x 254,97 €
Free delivery
2-year warranty
Generator on wheels Welds steel, stainless steel and aluminium MIG duty cycle: 115A at 60% / 90A at 100% MMA duty cycle: 104A at 60% / 80A at 100% Amperage range: 30 to 200A Combines 3 welding processes in 1 product: - MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and Alu 0.8 to 1mm) - MIG/MAG without gas (flux-cored wire Ø 0.9 mm) - MMA (basic and rutile electrode up to 4 mm) with Anti-stick function 4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool Removable 250A MAG torch (2T/4T) 3m (8mm contact tip) Digital interface and very intuitive adjustment Compatible with 9kva generator Bottle support for gas cylinder up to 4m3 Single-phase 230 V - 16 A power supply Dimensions: 77 x 79x 47 cm - 32kg IP23 rating for outdoor use Accepts long extension cables (100m)
Delivered with: 1x 250A 3m torch - (MB25) 1x 2m 16mm² ground clamp 1x 2m 16mm² electrode holder 1x 1m20 gas hose
Save 10%
Available for order
Lincoln Electric
Reference: K14098-1
LINCOLN - Inverter multi-process welding machine SPEEDTEC 180 C without torch K1409
(1 review)
€1,224.87
€1,360.97
995,83 € tax excl.
or 4 x 306,22 €
Free delivery
2-year warranty
This Inverter technology machine Lincoln Speedtec 180C allows you to weld using 2 processes: MMA-MIG-MAG
It allows welding with rutile and basic electrodes (stainless steel - cast iron, etc.) of Ø 1.6 to 4 mm (electrode holder not included)
It operates on a 16 A or 25 A - 230 V domestic outlet depending on the amperage setting.
Its adjustment range is 20 to 200 A for MIG-MAG welding and 20 to 160 A for MMA welding.
Easy polarity reversal to allow the use of flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.
It features the following devices:
PFC (power factor corrector) It can be used with a 100 m extension cord without any power loss.
The power supply can be provided from a generator.
HOT START adjustable, which reduces the risk of sticking when the electrode and workpiece are cold, also facilitates arc ignition and penetration.
ARC FORCE adjustable, which maintains constant amperage regardless of arc length.
ANTI-STICKING reduces the risk of the electrode sticking to the workpiece.
Its advantages:
The high duty cycle of this machine guarantees use without premature triggering of the thermal protection system.
This machine is delivered with:
1 power cable 2 m
1 gas hose 2 m
1 ground cable 3 m
1 set of rollers Ø 0.8 and 1 mm for steel welding wire
Save 10%
Available for order
AEG Powertools
Reference: 4935478943
AEG - Cordless Multitool 18 V -BMT 18-0
€218.33
€242.59
177,51 € tax excl.
or 3 x 72,78 €
Free delivery
2-year warranty
. belt hook
. Interchangeable tool heads, rotatable 360° for easy switching between functions
. 6-position speed variator on a wider, more ergonomic trigger
. Softgrip handle
. Easy blade change without tools
. Oscillation angle 3.6°
. Compact and powerful - Lightweight 1.2 kg (1.46 with battery)
. LED lighting of the work area
. Design engineered for optimal ergonomics and better vibration absorption
. Supplied with cutting and sanding accessories
. Compatible with all tools in the PRO18V range
Batteries and charger available as optional extras below
Save 10%
Supplier stock
Gys
Reference: 029972
GYSMI 130P welding machine with case
€210.13
€233.48
170,84 € tax excl.
or 3 x 70,04 €
Free delivery
2-year warranty
Ideal for hobbyists or professionals
Duty cycle: 45A at 60% and 40A at 100%
Current range: 10 to 130A
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic stick electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Featherlight: 2.9kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 metres) 16mm² (10/25 mm² connector)
1x Shoulder strap
Save 20%
Available for order
Weldline
Reference: W000403824
EUROSPEED LS WELDLINE Welding Helmet
(5 reviews)
€123.00
€153.75
100,00 € tax excl.
Free delivery
2-year warranty
This auto-darkening welding helmet features 2 sensors.
Solar power + 2 AAA batteries
Viewing area: 98 x 40 mm. Wrap-around shape for optimal head protection.
Switching time light/dark: 1/25000 sec
Return to light state adjustable from 0.1 to 1 second.
Adjustable shade from 9 to 13 for welding.
Grinding mode via internal button.
the "LS" technology applied to the lens of this welding helmet, in addition to its role of protecting against harmful rays, helps increase the penetration rate.
In clear mode, the lens lets more color through to the welder's eye, allowing a more precise rendering of detail by reducing the eye's adaptation effort.
The welder will be more precise in their movements and less fatigued during welding operations.
18-month warranty.
Optical class 1/1/1/2
Weight 475 g
Delivered with:
2 outer protective lenses
1 inner protective lens
1 sweatband
1 comfort cushion on headband.
Filter lens