Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
Electrode holder PARVA2 200 Amperes + 25 mm² cable length 3 m (KIT-562) or length 4 m (KIT 564)
Earth clamp opening 45 mm
Duty cycle 150 A @60% - 200 A @ 35%
Connector 9 mm
Reference: KIT-562
Electrode holder 200 A + 25 mm² cable connector 9 mm
€53.74
43,69 € tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
Electrode holder PARVA2 200 Amperes + 25 mm² cable length 3 m (KIT-562) or length 4 m (KIT 564)
Earth clamp opening 45 mm
Duty cycle 150 A @60% - 200 A @ 35%
Connector 9 mm
Customer reviews
Product reviews
-
Hello, impeccable product, nothing to report
-
Good quality with 4 meters of cables it is ideal
-
very good
-
Not yet tested
-
very good
-
Very good
-
RAS
-
flush
-
Requires at least 4 m
-
Quality material, similar to the manufacturer's material and conforming to the definition of the object on the site. Careful packaging.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
Sacit
Reference: CAV000081
2-row brush + welding hammer SACIT
(5 reviews)
€4.98
4,05 € tax excl.
Fast delivery
2-year warranty
Reversible hammer-brush, combining a hammer and a brush for chipping and brushing slag from the weld bead.
Practical 2-in-1 tool for post-weld cleaning.
Carefully sized handle to keep the user away from the hot zone.
Dimensions:
Total length (brush + handle): 290 mm (brush + handle length)
Handle length: 145 mm
Wire length: 25 mm
Available for order
Trafimet
Reference: ERGOPLUS-500
MIG-MAG 500 A Ergoplus 500 Torch
(1 review)
€186.55
151,67 € tax excl.
or 3 x 62,18 €
Free delivery
2-year warranty
ERGOPLUS 500 EURO TORCH Water-cooled.
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new double swivel joint,
- removable torch handle (included in all standard torch assemblies),
- cable assembly fitted with a new reduced surface friction, for smooth movement without snagging,
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more resistant,
- new rear housing to prevent crushing of water hoses,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Water cooling - 1.6 L/minute
Duty cycle 450 A @ 100% with mixed gas
For use with welding wire Ø 1 to 2.4 mm
Accepts M8 threaded contact tips
factory-equipped with a liner for steel or stainless steel wire Ø 1.2/1.6 mm and a 1.2 mm contact tip
Available for order
Gys
Reference: GYS-GAL2-ALUMINIUM
2 Type B drive rolls for aluminum wire MIG welding GYS welder
(7 reviews)
€33.11
26,92 € tax excl.
Fast delivery
2-year warranty
2 double V-groove 35° drive rolls for GYS welder for solid aluminum wire, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibilities:
• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L
Available for order
Le Lorrain
Reference: 054201
Argon and Argon +CO² column gas regulator
(3 reviews)
€203.97
165,83 € tax excl.
or 3 x 67,99 €
Free delivery
2-year warranty
This column regulator provides very precise gas flow control, ideal for TIG welding of stainless steel and aluminium
Regulator set at 3.5 bar with column (rotameter) from 0 to 30 L
Type C connection thread
French Manufacturing
Available for order
SOUDO METAL
Reference: MI-MPH35
Medium magnetic positioner
(92 reviews)
€16.40
13,33 € tax excl.
Fast delivery
2-year warranty
Large magnetic positioner.
Available angles: 45 - 90 and 135°
Dimensions A: 92 mm and B: 93 mm
Capacity: 9.2 kg
Available for order
Trafimet
Reference: MD0009
10 contact tips for Aluminium wire M6 thread - length 28 mm
(31 reviews)
€12.20
9,92 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Trafimet contact tips for welding with steel or aluminium wire
3 diameters available: 0.8 - 1 and 1.2 mm
M6 thread. Length 28 mm
For Mig-Mag torch 250A @60%
Available for order
Oxyturbo
Reference: 245400
Regulator with flowmeter and column for refillable cylinder
(8 reviews)
€91.23
74,17 € tax excl.
Fast delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO².
They comply with and are designed according to standard EN 585/ISO 2503
Pressure gauge size: Ø 70 mm.
This regulator has an adjustable flow rate from 0 to 30 liters / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
It allows you to adjust the gas flow rate (and therefore save money) more precisely than an adjustment using a dial flowmeter
Available for order
Trafimet
Reference: FB0117
2 Contact tip holders for ERGOPLUS 15 torch
(5 reviews)
€7.12
5,79 € tax excl.
Fast delivery
2-year warranty
2 Contact tip holders for ERGOPLUS 15 and ERGOPLUS 15 Premium torch
Available for order
GEKA
Reference: 010830
GEKA |UHSS solid wire Ø 0.8 mm for bodywork welding weight 5 kg
(5 reviews)
€80.97
65,83 € tax excl.
Fast delivery
2-year warranty
UHSS* steel wire.
Wire spool Ø 200 mm. Weight 5 KG - Wire Ø: 0.8 mm
UHSS (Ultra High Strength Steel) wire. UHSS steel is particularly used in bodywork. This material makes it possible to reduce thickness and weight while preserving extreme robustness and collision resistance of components.
Classification of this wire: AWS/ASME SFA-5.28: ER 120 S-G
Standard ISO 16834 W Mn4Ni2.5CrMo
Pure Argon shielding gas
*Ultra High Strength
DECA
Reference: 010673
Drive roller for DECA welder wire
(35 reviews)
€4.61
3,75 € tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
Available for order
Le Lorrain
Reference: 150381
Le Lorrain |female coupler/ 12/100 ISOCOUPLE
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Female neutral gas nozzle
Compatible with quick isocouple connectors 150376
This nozzle fits onto the outlet of your fixed-position regulator and allows you to couple your gas hose fitted with connector 150376
Available for order
Telwin
Reference: 742090
Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm
(3 reviews)
€21.01
17,08 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm
Compatible with TELWIN welding machines:
TECHNOMIG 215 Dual Synergic - 225 - 240 - 260
ELECTROMIG 220 Synergic - 230 - 330 WAVE
MASTERMIG 220/2 - 270/2 - 300
Available for order
Kemppi
Reference: 4307650
KEMPPI - Wire guide liner for steel or stainless steel
€28.03
22,79 € tax excl.
Fast delivery
2-year warranty
Wire guide liner for steel or stainless steel wire Ø 0.6 to 1 mm.
Suitable for KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on the MINARMIG 170 AND 200 EVO welding machines sold on our website.
Available for order
Telwin
Reference: 802115
Aluminium Welding Kit for Telwin Machine
(6 reviews)
€81.89
66,58 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines:
Telmig 195/2-200/2-203/2-250/2-251/2-281/2
Tecnomig 180 Euro - Technomig 210 dual synergic
Maxima 200 -230 - 270
It includes:
1 aluminium wire spool 0.8 mm Ø 100 mm weight 450g - 1 support kit for Ø 100 spool - 1 wire liner 3 m - 1 wire feed roller 0.8 / 1 mm - 5 contact tips Ø 0.8 mm and 1 mm.
Available for order
StrongHandTools
Reference: MS2
Double angular magnetic squares with switches
(2 reviews)
€128.13
104,17 € tax excl.
Free delivery
2-year warranty
The quick and easy way to hold round or flat workpieces
Two on/off switches for independent operation
2 sizes are available:
MS2-80: pulling force 55 kg - Dimensions 152 x 152 x 38 mm.
MS2-90: pulling force 120 kg - Dimensions 197 x 197 x 48 mm
Available for order
GEKA
Reference: FIL-INOX309L-200/5
GEKA | Stainless wire 309L spool Ø 200 mm weight 5 KG
€187.58
152,50 € tax excl.
or 3 x 62,53 €
Free delivery
2-year warranty
309L Si stainless steel wire spool Ø 200 mm. Weight 5 kg
Standard AWS A5.9 ER 309LSi
ISO 14343-A G 23 12 LSi
Wire section available: 0.8 and 1 mm
The spool diameter is Ø 200 mm
309L is often used in applications where stainless steels need to be welded to carbon steels or mild steels, as it offers good compatibility with both types of metals while maintaining good corrosion resistance and good mechanical strength.
The main characteristics of 309L TIG include:
- Good corrosion resistance: Thanks to its chromium and nickel content, 309L offers excellent corrosion resistance, even at high temperatures.
- High service temperature: It can be used at high temperatures, making it ideal for high-temperature applications.
- Low carbon content: The low carbon content reduces susceptibility to intergranular corrosion after welding.
This type of material is often used in industrial applications such as heat exchangers, industrial furnaces, chemical and petrochemical equipment, as well as in shipbuilding and marine applications.
Electrode holder PARVA2 200 Amperes + 25 mm² cable length 3 m (KIT-562) or length 4 m (KIT 564)
Earth clamp opening 45 mm
Duty cycle 150 A @60% - 200 A @ 35%
Connector 9 mm