Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
This kit includes:
5 contact tips Ø 1.0 M8 steel / stainless steel
5 contact tips Ø 1.2 M8 steel / stainless steel
5 contact tips Ø 1.0 M8 aluminium
5 contact tips Ø 1.2 M8 aluminium
3 diffusers 350 A
3 gas nozzles 350 A
Reference: 041417
Accessories kit for MIG torch MB 36 350A
€56.37
45,83 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
This kit includes:
5 contact tips Ø 1.0 M8 steel / stainless steel
5 contact tips Ø 1.2 M8 steel / stainless steel
5 contact tips Ø 1.0 M8 aluminium
5 contact tips Ø 1.2 M8 aluminium
3 diffusers 350 A
3 gas nozzles 350 A
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Gys
Reference: 041523
€23.32
18,96 € tax excl.
Fast delivery
2-year warranty
1 nail welding nozzle for 150 A torch
This nozzle fits onto the end of your torch as a replacement for the gas nozzle.
It allows you to weld studs for dent pulling on car bodywork.
In stock
Sacit
Reference: URANIA
(1 review)
€33.46
27,20 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder
Die-cast brass body
Insulating coating in non-flammable, heat-resistant thermosetting materials
Electrode clamping in 5 positions
URANIA 5 For cable cross-section 35 - 50 mm²
250 A @ 60% and 300 A @ 35% - For electrodes from 3.2 to 5 mm
URANIA 6 For cable cross-section 50-70 mm²
300 A @ 60% and 400 A @ 35% - For electrodes from 4 to 6.3 mm
In stock
Trafimet
Reference: MC0025
€16.30
13,25 € tax excl.
Fast delivery
2-year warranty
This spot welding nozzle fits on the end of your MIG torch and guides you in your spot welding work by allowing you to see your weld point, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.
Suitable for Lincoln torches models LGS and LGP 250
Length: 68 mm
Diameter: 18 mm
Supplier stock
Soudure pro
Reference: 010892
(24 reviews)
€27.16
22,08 € tax excl.
Fast delivery
2-year warranty
Spool of stainless steel wire 308 L Ø 0.8 mm. Weight 700 g
The use of this welding wire requires the supply of a shielding gas (Argon +CO² or Argon + O²).
This wire allows welding of STAINLESS STEELS
The spool diameter is Ø 100 mm
Supplied in protective plastic film + cardboard box.
In stock
Sacit
Reference: F11373
(5 reviews)
€39.15
31,83 € tax excl.
Fast delivery
2-year warranty
Rotating magnetic earth clamp 400 Amperes
Duty cycle 300 A @ 60% and 400 A @ 35%
Ideal for welding parts with a large flat surface
Maximum cable cross-section: 16-25 / 35-50 mm²
In stock
Le Lorrain
Reference: 516025
(8 reviews)
€9.18
7,46 € tax excl.
Fast delivery
2-year warranty
Gas fitting for Ø 0.6 mm inner hose
Thread 12 x 100 straight
HELVI
Reference: 23005007
(7 reviews)
€8.97
7,29 € tax excl.
Fast delivery
2-year warranty
This nozzle fits on the end of your MIG torch
Its role is to direct the gas flow toward the weld and the melting wire.
This nozzle has an internal thread fitting the torches of HELVI Fox 160 and Panther 132 welding machines
In stock
Trafimet
Reference: CX05
(35 reviews)
€3.23
2,63 € tax excl.
Fast delivery
2-year warranty
1 Male Quarter-Turn Connector
In stock
Trafimet
Reference: EA030
(11 reviews)
€9.82
7,98 € tax excl.
Fast delivery
2-year warranty
5 Springs for MIG-MAG torch swan neck
Depending on the type of your torch (MB15 or MB25), you will need to choose one of the two available references
In stock
Lincoln Electric
Reference: LINCOLN-GALET
(10 reviews)
€35.88
29,17 € tax excl.
Fast delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
In stock
Telwin
Reference: 802115
(6 reviews)
€81.89
66,58 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines:
Telmig 195/2-200/2-203/2-250/2-251/2-281/2
Tecnomig 180 Euro - Technomig 210 dual synergic
Maxima 200 -230 - 270
It includes:
1 aluminium wire spool 0.8 mm Ø 100 mm weight 450g - 1 support kit for Ø 100 spool - 1 wire liner 3 m - 1 wire feed roller 0.8 / 1 mm - 5 contact tips Ø 0.8 mm and 1 mm.
In stock
Trafimet
Reference: GM0512
€8.66
7,04 € tax excl.
Fast delivery
2-year warranty
Wire liner for steel or stainless steel wire - Length 5 m for wire Ø 1 and 1.2 mm.
Inner diameter 2 mm and outer diameter of the liner 4.6 mm
In stock
Gys
Reference: 041233
(14 reviews)
€51.05
41,50 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 aluminium
3 contact tip holders 250 A
5 nozzle springs
3 gas nozzles
In stock
Kemppi
Reference: GAINE-SP
€12.20
9,92 € tax excl.
Fast delivery
2-year warranty
Wire guide liners for steel or stainless steel wire from Ø 0.6 to 1 mm depending on the chosen reference
These liners are designed to be used with the EURO adapter for MINARMIG 170 OR 200 welding machines (reference W008366)
In stock
Sacit
Reference: KIT-243/244
(9 reviews)
€40.37
32,82 € tax excl.
Fast delivery
2-year warranty
Earth clamp 250 Amperes + 25 mm² cable length 3 m (KIT-243) or length 4 m (KIT 244)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
Connector TX 25
Opening 45 mm
DECA
Reference: 010841
(35 reviews)
€13.02
10,58 € tax excl.
Fast delivery
2-year warranty
This kit includes
1 roller for use with steel or stainless steel wire Ø 0.6 - 0.8 and 1 mm
1 roller for use with flux-cored wire Ø 0.8 - 0.9 and 1.2 mm
1 roller for use with aluminium wire Ø 0.8 and 1 mm
This kit includes:
5 contact tips Ø 1.0 M8 steel / stainless steel
5 contact tips Ø 1.2 M8 steel / stainless steel
5 contact tips Ø 1.0 M8 aluminium
5 contact tips Ø 1.2 M8 aluminium
3 diffusers 350 A
3 gas nozzles 350 A