By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
Available for order
Telwin
Reference: 803152
€173.22
140,83 € tax excl.
or 3 x 57,74 €
Free delivery
2-year warranty
2 straight arms length 250 mm + 2 electrodes 690047 AND 690050 Telwin XA 2 Modular 20/TI Modular 230 and 400 Kit
Supplier stock
Telwin
Reference: 802666
€302.37
245,83 € tax excl.
or 4 x 75,59 €
Free delivery
2-year warranty
This kit includes: 802666 / T04050 / T04058. It is compatible with the Superior 400 welding machine models from TELWIN.
Supplier stock
Telwin
Reference: PD260A
€2,019.20
€2,099.20
1 641,63 € tax excl.
or 4 x 504,80 €
Free delivery
2-year warranty
This pack includes 4 products:
- 1 TELWIN DUAL 260 multiprocess unit + 3 m MIG-MAG torch with EURO connector + earth clamp
- 1 EUROPA trolley to move the welding unit + 1 gas cylinder with a volume of up to 4 m3
- 1 Le Lorrain regulator with two pressure gauges
- 1 Enermix C15 gas cylinder for welding steel
By choosing this pack, you save €80 on purchase.
Supplier stock
Telwin
Reference: PD260B
€1,582.32
€1,612.32
1 286,44 € tax excl.
or 4 x 395,58 €
Free delivery
2-year warranty
This pack includes the 2 products below:
1 TELWIN DUAL 260 multi-process welder + 3 m MIG-MAG torch with EURO connector + earth clamp
1 EUROPA trolley to move the welding machine + 1 gas cylinder with a volume of up to 4 m3
Save 30 euros with this pack.
Supplier stock
Telwin
Reference: PT236A
€643.26
€693.26
522,98 € tax excl.
or 4 x 160,82 €
Free delivery
2-year warranty
This pack includes the 4 products below: 1 MMA Inverter Technology 236 XT welding machine 1 Telwin 802937 welding helmet 1 pocket apron GA1049BST 1 pair of gloves G100501
Supplier stock
Telwin
Reference: PT186A
€616.61
€666.61
501,31 € tax excl.
or 4 x 154,15 €
Free delivery
2-year warranty
This pack includes the 4 products below: 1 MMA Inverter Technology 186 XT MPGE welding machine 1 Telwin 802937 welding helmet 1 pocket apron GA1049BST 1 pair of gloves G100501
Supplier stock
Telwin
Reference: PD222A
€2,427.20
1 973,33 € tax excl.
or 4 x 606,80 €
Free delivery
2-year warranty
This pack includes 3 products:
1 Telwin DUAL 222 multi-process welding machine
1 contract-free SOL pure Argon gas cylinder for TIG welding
1 Telwin TIG welding kit
By choosing this pack, you save €80 on your purchase.
Supplier stock
Telwin
Reference: PD225A
€1,630.72
€1,710.72
1 325,79 € tax excl.
or 4 x 407,68 €
Free delivery
2-year warranty
This pack includes 3 products:
1 Telwin DUAL 225 multi-process welding machine
1 SOL Enermix C15 contract-free gas cylinder for MIG steel welding
1 regulator with 2 pressure gauges
By choosing this pack, you save €80 at purchase.
Supplier stock
Telwin
Reference: PD215A
€1,717.85
€1,797.85
1 396,63 € tax excl.
or 4 x 429,46 €
Free delivery
2-year warranty
This pack includes 4 products:
1 Telwin DUAL 215 multi-process welder
1 no-contract gas cylinder sol Enermix C15 for MIG steel welding
1 Le Lorrain regulator with 2 gauges and protective cap
1 Telwin America model trolley
The TIG torch and electrode holder shown in the photo are available as optional accessories
By choosing this pack, you save €80 on your purchase.
Supplier stock
Telwin
Reference: PD210B
€1,205.35
€1,285.35
979,96 € tax excl.
or 4 x 301,34 €
Free delivery
2-year warranty
This pack includes 3 products:
1 Telwin DUAL 210 multi-process welding machine
1 gas cylinder without contract SOL Enermix C15 for MIG steel welding
1 Regulator with 2 gauges and protective caps Le Lorrain
The TIG torch and electrode holder shown in the photo are available as an option
By choosing this pack, you save €80 on your purchase.
Available for order
Telwin
Reference: 803154
€216.27
175,83 € tax excl.
or 3 x 72,09 €
Free delivery
2-year warranty
1 straight arm length 350 mm + 1 curved arm length 350 mm + 2 inclined electrodes Ø 12mm for Telwin spot welder
Telwin XA 8 kit
Modular 20/TI
Modular230 and 400
Available for order
Telwin
Reference: 804362
€301.35
245,00 € tax excl.
or 4 x 75,34 €
Free delivery
2-year warranty
This kit includes:
1 TIG torch ST 17 length 4 m.
1 regulator with 2 gauges for refillable cylinder.
1 earth clamp + 25 mm² cable length 3 m
1 gas hose length 2 m
This kit is intended by the manufacturer for the following TELWIN brand TIG welding machine models:
Technology TIG 182
Available for order
Telwin
Reference: 802788
€306.48
249,17 € tax excl.
or 4 x 76,62 €
Free delivery
2-year warranty
This kit includes:
1 TIG ST 26 torch length 4 m.
1 regulator with 2 gauges for refillable cylinder.
1 earth clamp + 25 mm² cable length 3 m
1 gas hose length 2 m
This kit is intended by the manufacturer for the following TELWIN brand TIG welding machine models:
Technology TIG 222 and 230
Superior TIG 251-252-311-322-421-422
Supplier stock
Telwin
Reference: 802790
€814.88
662,50 € tax excl.
or 4 x 203,72 €
Free delivery
2-year warranty
This cooling unit is suitable for TELWIN TIG welding machines whose references are listed below
Technology Tig 222
Superior Tig 252 and 311
Delivered with clamping kit reference 981648
Available for order
Telwin
Reference: Clear-Cup.L
€26.54
21,58 € tax excl.
Fast delivery
2-year warranty
This transparent nozzle is compatible with TIG torches type 17-18 and 26 2 electrode holder diameters available: 1.6 or 2.4 mm Tungsten electrode not included
| Combinations | Price | |
| €26.54 | ||
| €26.54 | ||
Available for order
Telwin
Reference: Clear-Cup
€23.16
18,83 € tax excl.
Fast delivery
2-year warranty
This transparent nozzle is compatible with TIG torches of type 17-18 and 26
2 electrode holder diameters are available: 1.6 or 2.4 mm
Tungsten electrode not included
| Combinations | Price | |
| €23.47 | ||
| €23.16 | ||
Available for order
Telwin
Reference: Crystal
€27.63
22,46 € tax excl.
Fast delivery
2-year warranty
This transparent nozzle is compatible with TIG torches of type 17-18 and 26
2 electrode holder diameters available: 1.6 or 2.4 mm
Tungsten electrode not included
| Combinations | Price | |
| €27.63 | ||
| €27.63 | ||
Available for order
Telwin
Reference: 802143
€27.58
22,42 € tax excl.
Fast delivery
2-year warranty
This magnetic cutting guide helps you make straight cuts.
It is placed on the sheet metal to be cut and stays in position during cutting thanks to its magnet.
Available for order
Telwin
Reference: 804059
€153.70
€192.13
124,96 € tax excl.
or 3 x 51,23 €
Free delivery
2-year warranty
This compass kit delivered in a case is suitable for the torches on the following plasma cutters:
Superior plasma 70
Superior plasma 100
Superior plasma 160
Available for order
Telwin
Reference: 804169
€59.45
48,33 € tax excl.
Fast delivery
2-year warranty
This compass kit is suitable for the torches on the following plasma cutters:
Technology plasma 41 XT
Technology plasma 54 XT
Technology plasma 60 XT
Supplier stock
Telwin
Reference: 816147 + 804416
€1,320.37
€1,409.37
1 073,47 € tax excl.
or 4 x 330,09 €
Free delivery
2-year warranty
Supplier stock
Telwin
Reference: 816146+804415
€968.63
787,50 € tax excl.
or 4 x 242,16 €
Free delivery
2-year warranty
Supplier stock
Telwin
Reference: 816070
€1,965.54
1 598,00 € tax excl.
or 4 x 491,39 €
Free delivery
2-year warranty
Inverter plasma cutter with contact pilot arc ignition.
Enables fast, distortion-free cutting, cutting on mesh and gouging of all conductive materials, such as steel, stainless steel, galvanised steel, aluminium, copper, or brass for example.
Easy-to-read digital display.
High cutting current stability.
Thermostatic protections for over-voltage and under-voltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20–30 mm depending on materials.
Adjustment range: 20 to 70 A
Options:
1) Interface with automated cutting table
2) Remote control
Requires connection to a compressor delivering 200 l/min of air at a pressure of 4–5 bar.
Supplied with:
Available for order
Telwin
Reference: 802976
€76.88
62,50 € tax excl.
Fast delivery
2-year warranty
Coolant liquid for MIG-MAG or TIG torch cooling system 5L container
Supplier stock
Telwin
Reference: 804976
€151.70
123,33 € tax excl.
or 3 x 50,57 €
Free delivery
2-year warranty
This CNC interface kit is installed between your plasma cutter and a numerically controlled cutting table
This kit is compatible with TELWIN brand plasma cutters whose model names are listed below:
Superior Plasma 70-100-160.
Cable length 10 m
Available for order
Telwin
Reference: 803400
€173.22
€216.53
140,83 € tax excl.
or 3 x 57,74 €
Free delivery
2-year warranty
Site case for safely transporting your TIG or MMA welder.
Resistant to shocks and moisture.
Internal dimensions 46.5 x 33.5 x H 22 cm - Weight 3.5 kg.
Supplier stock
Telwin
Reference: 804108
€253.17
205,83 € tax excl.
or 3 x 84,39 €
Free delivery
2-year warranty
This kit for a manual torch includes:
1 torch tip
8 electrodes
3 nozzles 20-50A
5 nozzles 70 A
1 diffuser
This kit is compatible with TELWIN brand plasma cutters;
Reference:
SUPERIOR PLASMA 70
Supplier stock
Telwin
Reference: 816170 +804041
€3,068.85
2 495,00 € tax excl.
or 4 x 767,21 €
Free delivery
2-year warranty
Inverter technology plasma cutter with contact pilot arc ignition.
Enables fast cutting without distortion, cutting through grating, and gouging of all conductive materials, such as steel, stainless steel, galvanized steel, aluminium, copper, or brass for example.
Easy-to-read digital display.
High cutting current stability.
Thermostatic protection against overvoltage and undervoltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20 - 30 mm depending on materials.
Adjustment range from 20 to 70 A
Options:
1) Interface with automated cutting table
2) Remote control
Requires connection to a compressor delivering 200 l/min of air at a pressure of 4 - 5 bar.
Supplied with:
1 Tecmo torch 6 m long fitted with a 70 A nozzle + 1 spare 70 A nozzle.
1 ground clamp + cable 25 mm² cross-section, 5 m long
Supplier stock
Telwin
Reference: 802956
€173.22
140,83 € tax excl.
or 3 x 57,74 €
Free delivery
2-year warranty
This kit for manual torch includes:
1 Skid
1 Electrode
1 Nozzle 85 A
1 Cup
1 Diffuser
This kit is suitable for TELWIN brand plasma cutters;
References:
SUPERIOR PLASMA 100
SUPERIOR PLASMA 160
Available for order
Telwin
Reference: 802336
€200.90
€251.13
163,34 € tax excl.
or 3 x 66,97 €
Free delivery
2-year warranty
Essential when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 10 m cable.
Available for order
Telwin
Reference: 823017
€1,100.85
895,00 € tax excl.
or 4 x 275,21 €
Free delivery
2-year warranty
This portable spot welding system is the ideal tool for assembling thin mild steel sheets such as metal furniture or vehicle restoration
Thanks to the selection of the thickness of the sheets to be assembled, the portaspot defines the optimal current and spot welding time. You can also manually adjust this spot welding time
It allows the assembly of sheets from 0.6 + 0.6 mm up to 2.0 + 2.0 mm
The spot mode is continuous or pulsed depending on the type of sheet
It features clamping force adjustment on the arm and has a handle made of thermal insulating material
Its power supply is three-phase 400 V and requires for its operation an electrical line controlled by a 16 A fuse
Supplied with the standard 120 mm arm
Welder weight 10.5 kg
The arms of this device have a diameter of 20 mm and the electrodes have a diameter of 12 mm
Supplied without power plug.
Available for order
Telwin
Reference: 803159
€183.98
149,58 € tax excl.
or 3 x 61,33 €
Free delivery
2-year warranty
2 straight arms length 140 mm + 1 straight electrode length 215 mm and 1 curved electrode for Telwin spot welder
Telwin XA 5 kit
Modular 20/TI
Modular 230 and 400
Available for order
Telwin
Reference: 804417
€101.48
82,50 € tax excl.
Fast delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
Supplier stock
Telwin
Reference: 804416
€121.98
99,17 € tax excl.
Free delivery
2-year warranty
This kit includes:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
Available for order
Telwin
Reference: 804415
€107.63
87,50 € tax excl.
Fast delivery
2-year warranty
This kit contains:
2 torch tips
2 long electrodes
6 electrodes
6 nozzles Ø 0.9 mm
2 long nozzles Ø 0.9 mm
2 diffusers
This kit is suitable for the Telwin plasma cutters listed below
Technology 41XT
Infinity PLASMA 40
Available for order
Telwin
Reference: 804208
€10.25
8,33 € tax excl.
Fast delivery
2-year warranty
Quick connector for easy connection of the hose to the regulator and your welding machine
Compatible with TELWIN welding machines:
Technomig DUAL 150 - 180 -210 -215 -260
Technomig 240 Wave
Electromig 220 - 300 - 400 Synergic
Electromig 450 - 550 Synergic Aqua
Electromig 230- 330 and 430 Wave Aqua
Inverpulse 60.30 - 60.40 Wave Aqua
Superior 400 - 630 CE VRD
Supermig 380
Mastermig220/2 -270/2
Maxima 230 - 270 Synergic
Infinity TIG 225 DC-HF/LIFT VRD
Technology 230 DC HF/LIFT and 222AC/DC HF/LIFT vrd
Superior TIG 251 DC -252 AC/DC - 311 DC - 322 AC/DC - 421 DC - 422 AC/DC
Supplier stock
Telwin
Reference: 816147
€1,306.88
1 062,50 € tax excl.
or 4 x 326,72 €
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables clean cutting of materials up to 12 mm thick or 15 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable change indicator device
This cutter is fitted with a warning indicator light for consumable replacement
Delivered with a 4 m torch + ground clamp and cable 3 m long
Available for order
Telwin
Reference: 816148
€1,327.38
1 079,17 € tax excl.
or 4 x 331,85 €
Free delivery
2-year warranty
This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with a warning indicator light for consumable replacement
Supplied with a 4 m torch + ground clamp and 3 m cable
Available for order
Telwin
Reference: 802939
€7.12
5,79 € tax excl.
Fast delivery
2-year warranty
2 clear protective lenses 134 x 114 mm for Telwin welding helmets, compatible with the following models:
Jaguar and Jaguar Cybor
Vantage Grey XXL and Vantage Red XL
Available for order
Telwin
Reference: 804139
€27.16
22,08 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for small weld beads
1 L can.
Applied with a suitable brush. Reference 981863
Available for order
Telwin
Reference: 816146
€886.62
720,83 € tax excl.
or 4 x 221,66 €
Free delivery
2-year warranty
This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminium, copper, brass....
It is compact and has a small footprint (420 x 182 x H 292 mm) and weight (7 kg)
This cutter allows a clean cut on materials up to 15 mm thick or 18 mm in separation.
It allows piercing of sheet metal (refer to the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable replacement indicator device c
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with an indicator light signalling the need to replace consumables.
Delivered with a 4 m torch + earth clamp and cable 3 m long
Supplier stock
Telwin
Reference: 803045
€854.85
695,00 € tax excl.
or 4 x 213,71 €
Free delivery
2-year warranty
This arm kit is compatible with Telwin spot welder models
Digital 7000 - Digital 9000 and 9000 qua
Modular 230 and 400
It includes arm kits XA3 - XA4 - XA6 - XA 7 AND XA9
Available for order
Telwin
Reference: 742729
€49.51
40,25 € tax excl.
Fast delivery
2-year warranty
2 Double-groove rollers for Mig-Mag TELWIN welder for flux-cored wire, available for wire diameter: 1 / 1.2 mm
Compatible with Telwin welders:
TECHNOMIG 223 TREO - 240-260
ELECTROMIG 281/2 Turbo - 300 SYN. - 230- 330 WAVE - 400, 450 Synergic -550 Synergic
MASTERMIG 300 -270/2 - 400 - 500
ELECTROMIG 300 Synergic - 330 Wave - 430 WAVE - 450 - 550 -330-
SUPERMIG 380
SUPERIOR 400 MIG PACK - 630 MIG PACK -
INVERPULSE 60.30, 60.40
Available for order
Telwin
Reference: 722078
€10.05
€11.17
8,17 € tax excl.
Fast delivery
2-year warranty
Gooseneck for MIG-MAG torch reference TW 160 or TW 180 fitted on Telwin brand welders models
Bimax 120- 140- 152 Bimax 4.165 Turbo - Bimax 162 Turbo
Maxima 160 - Maxima 190
Telmig 170/1 - Telmig 180/2
Available for order
Telwin
Reference: 742402
€101.48
82,50 € tax excl.
Fast delivery
2-year warranty
Telwin TW 160 replacement MIG-MAG torch, length 2 m, for the welding machine references listed below
BIMAX 132 - 140 - BIMAX 152 - BIMAX 4.165 Turbo - BIMAX 162 Turbo
TECHNOMIG 150 DUAL SYNERGIC
MAXIMA 160
Supplier stock
Telwin
Reference: 804028
€90.20
73,33 € tax excl.
Fast delivery
2-year warranty
Marking kit for Cleantech 200 Telwin
Available for order
Telwin
Reference: 722305
€17.38
14,13 € tax excl.
Fast delivery
2-year warranty
Swan neck for MIG-MAG torch reference MT 15 found on Telwin brand welding machines, models
Technomig 180 Euro - Technomig 210 and 215
Electromig 220 - Mastermig 220/2
Supplier stock
Telwin
Reference: 802017
€282.90
230,00 € tax excl.
or 3 x 94,30 €
Free delivery
2-year warranty
Indispensable when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 10 m cable.
Available for order
Telwin
Reference: 802586
€91.23
74,17 € tax excl.
Fast delivery
2-year warranty
Available for order
Telwin
Reference: 802627
€152.72
€218.18
124,17 € tax excl.
or 3 x 50,91 €
Free delivery
2-year warranty
Supplier stock
Telwin
Reference: INDUCTOR 5000
€305.45
248,33 € tax excl.
or 4 x 76,36 €
Free delivery
2-year warranty
SUPER REMOVER
Quick removal of glass on parts to be painted
Allows reuse of glass with integrated trims
PAD INDUCTOR
Quickly removes Stickers, Graphics, Logos, Labels, Data plates, Mouldings, Side plastics, Car roofs, Interior trims...
WONDER PEN
Acts on dents caused by hail without removing the paint
Extension for WONDER PEN
Adds to the WONDER PEN in order to facilitate access to certain parts of the vehicle
TWISTER HORIZONTAL
To unlock bolts or nuts of Ø M8/M10
TWISTER WIRES
2 copper shims of 550 mm in length for heating parts of various sizes
It is necessary to make 3 turns with the wire around the part for the heating to work correctly
METAL RELEASER
For unlocking bolts and nuts using induction heating
The Remote Control pedal is required to use it
| Combinations | Price | |
| €55.35 | ||
| €305.45 | ||
| €225.35 | ||
| €234.72 | ||
| €276.60 | ||
| €60.48 | ||
| €53.10 | ||
| €55.35 | ||
Supplier stock
Telwin
Reference: 835012
€1,225.04
996,00 € tax excl.
or 4 x 306,26 €
Free delivery
2-year warranty
This induction heating system allows in particular to:
- Remove all adhesives, logos, strips, mouldings
- Remove bonded glazing while preserving the trim (rear window, quarter window, panoramic roof…)
- Remove anti-gravel coatings and seals
- Loosen and free mechanical parts (bolts, screws, spark plugs, injectors…)
- Remove minor dents from bodywork without needing to repaint (hail damage)
It is particularly suitable for bodywork and guarantees considerably reduced intervention times
It intelligently and completely automatically adjusts its intensity (Smart Power) using an innovative AutoCheck microprocessor system
Using the principle of electromagnetic induction, it can transfer a large amount of heat to a specific area (Smart Protection) in just a few seconds. In this way, glass, rubber, plastic and painted surfaces are not damaged in the area being treated or even in the surrounding areas
Delivered with bolt heater for Ø m8/m10 and M12/M14
Supplier stock
Telwin
Reference: 803156
€306.48
249,17 € tax excl.
or 4 x 76,62 €
Free delivery
2-year warranty
2 right arms length 500 mm Ø 20 mm + 2 straight electrodes Ø 12mm for Telwin digital Spotter 9000 spot welder
Kit Telwin XA 9
Available for order
Telwin
Reference: 981863
€91.73
74,58 € tax excl.
Fast delivery
2-year warranty
Cleaning brush kit for Cleantech 200 Telwin
This item is used when cleaning with the BRUSH IT cleaner
These brushes are suitable for cleaning small weld beads
Supplier stock
Telwin
Reference: 802832
€394.62
320,83 € tax excl.
or 4 x 98,66 €
Free delivery
2-year warranty
This inertia hammer kit for bodywork is used with the following Telwin welding machines:
Spotter 5500
Spotter 7000
Spotter 9000
It includes:
1 hammer
1 ground clamp
1 accessory case
Available for order
Telwin
Reference: BRUSH IT
€27.58
22,42 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for small weld beads
1 L or 5 L container.
Applied with a suitable brush.
| Combinations | Price | |
| €27.58 | ||
| €91.23 | ||
Available for order
Telwin
Reference: 804031
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866
Available for order
Telwin
Reference: 981866
€40.90
33,25 € tax excl.
Fast delivery
2-year warranty
Cleaning pad kit for Cleantech 200 Telwin
This item is used when cleaning with the CLEAN IT cleaner
These pads are suitable for cleaning large weld beads
Supplier stock
Telwin
Reference: 823195
€4,291.47
3 489,00 € tax excl.
Free delivery
2-year warranty
This spot welding system is the tool for assembling thin sheets of mild steel or stainless steel such as metal furniture or automotive restoration and repair
The multifunction digital display allows automatic regulation of the spot welding parameters depending on the tool selected and the sheet thickness
This unit enables individual and continuous welding of steel sheets, stainless steel, and galvanized sheets in pulsed mode
With the optional studder kit reference 802833, it enables spot welding of screws, washers, nails, rivets, washer spot welding and pulling, and intermittent spot welding
Automatic control of the mounted tool and voltage
It allows the assembly of sheets up to a thickness of 3.0 + 3.0 mm
The spot welding mode is continuous or pulsed depending on the type of sheet
It features an adjustable clamping force on the arm and a thermally insulating material handle
Single-phase 400 V power supply with a 32 A fuse socket
Supplied with a pneumatic clamp with air cooling and the standard 120 mm arm
Available for order
Telwin
Reference: 802663
€92.04
74,83 € tax excl.
Fast delivery
2-year warranty
This kit is used for aluminum welding in MIG-MAG mode with Telwin welding machines: Electromig 300 and Electromig 330 Wave
This welding is performed under pure argon shielding gas.
It includes:
1 wire liner 3 m for wire Ø 1 and 1.2 mm
1 wire feed roller 1 / 1.2 mm
3 contact tips Ø 1 and 1.2 mm.
Supplier stock
Telwin
Reference: 742576 TELW-GAL2-ACIER
€14.86
12,08 € tax excl.
Fast delivery
2-year warranty
2 double-groove rollers for Telwin MIG-MAG welding machine for steel or stainless steel wire, available for wire diameters: 0.6 / 0.8 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 223 TREO 240 - 260
ELECTROMIG 230 - 300 Synergic - 330 Wave - 430 WAVE - 550 SYNERGIC - 281/2 Turbo - 400 - 450 SYNERGIC -
MASTERMIG 270/2 - 300 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK - 630 MIG PACK
INVERPULSE 60.30- 60.40
| Combinations | Price | |
| €14.86 | ||
| €40.80 | ||
| €30.70 | ||
Available for order
Telwin
Reference: 722167 TELW-GAL2-ALU
€40.38
32,83 € tax excl.
Fast delivery
2-year warranty
2 double-groove rollers for Telwin welding machine for aluminum wires, available for wire diameters: 0.8 / 1 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 240 - 260
ELECTROMIG 281/2 Turbo -300 SYN. - 230 - 330 WAVE -400 - 450 SYNERGIC - 300 Synergic - 430 WAVE - 550 SYNERGIC -
MASTERMIG 270/2 - 300 - 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK -630 MIG PACK -
INVERSEPULSE 60.30 - 60.40
| Combinations | Price | |
| €47.45 | ||
| €40.38 | ||
Available for order
Telwin
Reference: 803155
€162.98
132,50 € tax excl.
or 3 x 54,33 €
Free delivery
2-year warranty
2 straight arms length 120 mm + 2 inclined electrodes Ø 12mm for Telwin spot welder
Telwin XA 4 Kit
Modular 20/TI
Modular230 and 400
Available for order
Telwin
Reference: 803153
€227.55
185,00 € tax excl.
or 3 x 75,85 €
Free delivery
2-year warranty
2 straight arms length 350 mm Ø 25 mm + 2 angled electrodes Ø 12mm for Telwin spot welder
Available for order
Telwin
Reference: 803151
€79.95
65,00 € tax excl.
Fast delivery
2-year warranty
2 straight arms length 120 mm + 2 straight electrodes Ø 12mm length 100 mm for Telwin spot welder
Available for order
Telwin
Reference: 803150
€131.20
106,67 € tax excl.
Free delivery
2-year warranty
2 straight arms length 120 mm + 2 angled electrodes Ø 12 mm length 100 mm for Telwin spot welder
Telwin XA 2 Kit
Modular 20/TI
Modular 230 and 400
Available for order
Telwin
Reference: 6900
€6.92
5,63 € tax excl.
Fast delivery
2-year warranty
Straight electrode Ø 12mm for Telwin spot welder
Modular 20/TI
Modular 230 and 400
| Combinations | Price | |
| €11.12 | ||
| €14.35 | ||
| €20.45 | ||
| €6.92 | ||
Available for order
Telwin
Reference: 690051
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Inclined electrode Ø 12mm with clamp for Telwin spot welder
Modular 20/TI
Modular230 and 400
This inclined electrode fits on the arms for inclined electrodes length 120 mm Telwin reference 690040
Available for order
Telwin
Reference: 816220
€599.77
€749.71
487,64 € tax excl.
or 4 x 149,94 €
Free delivery
2-year warranty
This inverter technology machine makes electrode welding easier thanks to direct current and its low power consumption
(230V-16A power supply).
It has an adjustment range of 10 to 170 A.
The digital amperage display allows you to be more precise in your work.
TIG welding allows you to weld on thin thicknesses that you could not achieve with an electrode in MMA mode.
Welding of steel, stainless steel, copper, nickel... possible from 0.5 mm thickness.
TIG welding mode requires the use of a shielding gas during the welding operation (pure Argon).
Arc ignition is achieved by touching the tip of the tungsten electrode to the metal workpiece and lifting it slightly to create the welding arc (TIG-LIFT ignition process).
It features protection (+/- 15% variation) against electrical overloads, allowing it to be powered by a generator. However, the generator must supply a stabilized current.
Equipped with the following systems:
HOT START to facilitate arc ignition, ANTI-STICKING which eliminates the problem of the electrode sticking to the workpiece, and ARC FORCE which increases arc power when the welding arc is kept short.
VRD: This device reduces the voltage when the welding machine is on but not in welding mode; it thus ensures the welder's safety should they inadvertently touch the electrode.
Delivered in a case with:
1 TIG torch 110 A with valve, gas opening valve on the torch; length 4 m.
This torch is equipped with a ceramic nozzle and a tungsten electrode Ø 1.6 mm.
1 flow meter for refillable gas cylinder.
1 MMA electrode holder allowing the use of rutile or basic electrode rods from Ø 1.6 to 4 mm, cable length 3 m.
1 ground clamp + cable length 3 m.
Available for order
Telwin
Reference: 802034
€199.88
162,50 € tax excl.
or 3 x 66,63 €
Free delivery
2-year warranty
This dent pulling kit for bodywork is used with the following Telwin welders:
Technomig 180 DUAL SYNERGIC and 180 EURO
Technomig 210 DUAL SYNERGIC - Technomig 215 DUAL SYNERGIC
Telmig 170/1-180/2-195/2-200/2-203/2-250/2-251/2
Mastermig 220/2-270/2
Electromig 220
It includes:
100 studs
1 puller
2 stud pointing nozzles
Available for order
Telwin
Reference: 803073
€302.37
245,83 € tax excl.
or 4 x 75,59 €
Free delivery
2-year warranty
This cart is the ideal way to move your welding machine.
This is a 2-in-1 cart: welding machine + gas cylinder on the same support.
Welding machine up to 65 cm in height.
Gas cylinder up to 4 m3
Assembled dimensions: 940 X 480 X H 1180 mm
The cylinder and the welding machine are secured to the cart with straps (included).
Cart sold unequipped.
The listed price does not include the gas cylinder or the welding machine.
Delivered unassembled.
Available for order
Telwin
Reference: 722019
€7.12
5,79 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for steel or stainless steel MIG welding wire Ø 0.6 and 0.8 mm and 0.9 flux-cored wire
Compatible with TELWIN welding machines:
TELMIG 170/1 - 180/2 - 195/2 - 200/2 - 203/2 - 250/2 Turbo - 251/2 Turbo - 281/2 Turbo
TECHNOMIG 210 Dual Synergic - 180 EURO-225
MAXIMA 200 - 230 - 270
MINIMAX 100
Supplier stock
Telwin
Reference: 802115
€81.89
66,58 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines:
Telmig 195/2-200/2-203/2-250/2-251/2-281/2
Tecnomig 180 Euro - Technomig 210 dual synergic
Maxima 200 -230 - 270
It includes:
1 aluminium wire spool 0.8 mm Ø 100 mm weight 450g - 1 support kit for Ø 100 spool - 1 wire liner 3 m - 1 wire feed roller 0.8 / 1 mm - 5 contact tips Ø 0.8 mm and 1 mm.
Available for order
Telwin
Reference: 690012
€6.41
5,21 € tax excl.
Fast delivery
2-year warranty
| Combinations | Price | |
| €12.82 | ||
| €6.41 | ||
Supplier stock
Telwin
Reference: 823016
€1,019.88
829,17 € tax excl.
or 4 x 254,97 €
Free delivery
2-year warranty
This portable spot welding system is the ideal tool for assembling thin mild steel sheets such as metal furniture or vehicle restoration
Thanks to the selection of the thickness of the sheets to be assembled, the portaspot defines the optimal current and spotting time. You can also manually adjust this spotting time
It allows the assembly of sheets from 0.6 + 0.6 mm up to 2.0 + 2.0 mm
The spotting mode is continuous or pulsed depending on the type of sheets
It features a clamping force adjustment on the arm and a handle made of thermal insulating material
Its power supply is single-phase 230 V and requires for its operation an electrical line controlled by a 25A fuse
Supplied with the standard 120 mm arm
Welder weight: 10.5 kg
The arms of this unit have a diameter of 20 mm and the electrodes a diameter of 12 mm
Supplied without power plug
Available for order
Telwin
Reference: 990702
€13.84
11,25 € tax excl.
Fast delivery
2-year warranty
This kit allows you to connect your Mig or Tig machine and your gas cylinder to your regulator for disposable cylinders.
It fits onto the rubber hose connected to the gas outlet fitting of your welding machine, and the other end of this small-diameter hose connects directly to the quick connector on the regulator for disposable cylinders.
Outer diameter of hose: 4 mm
Length 65 cm
Available for order
Telwin
Reference: 722955
€17.32
14,08 € tax excl.
Fast delivery
2-year warranty
Washer Hook
Available for order
Telwin
Reference: 722629
€9.69
7,88 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG welding wire Ø 1 mm Steel - Stainless Steel and Aluminium
Compatible with TELWIN welding machines:
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 - 180 EURO
TECHNOMIG 180 Dual Synergic - 210 Dual Synergic - 225
MAXIMA 160 - 190 - 200 - 230 - 270
TELMIG 170/1 - 180/2 - 195/2 - 200/2 - 203/2 - 250/2 - 251/2 Turbo - 281/2 TURBO - 250/2 TURBO
Available for order
Telwin
Reference: 722626
€7.13
5,80 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel flux-cored wire Ø 0.9 - 1.2 mm
Compatible with TELWIN machines:
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 Synergic - 210 - 180 EURO - 210 Dual Synergic - 150 DUAL SYNERGIC - 180 DUAL SYNERGIC -
MAXIMA 160 - 190 - 200 - 230 - 270
TELMIG 281/2 TURBO
Available for order
Telwin
Reference: 722529
€7.13
5,80 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and flux-cored wire Ø 0.8 and 0.9 mm
Compatible with TELWIN welders:
MINIMAX 100 - BIMAX 110 - 132 -140 -152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 Dual Synergic
MAXIMA 160- 190 -200 - 230 - 270
TECHNOMIG 180 EURO - 210 SYNERGIC - 180 DUAL SYNERGIC -
TELMIG 281/2 TURBO
Available for order
Telwin
Reference: 802582-804109
€18.40
14,96 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
Available for order
Telwin
Reference: 990703
€18.33
14,90 € tax excl.
Fast delivery
2-year warranty
This accessory allows the use of wire spools with a diameter of 100 mm (flux-cored, stainless steel or aluminum wire) on Telwin welding machine models when not supplied upon purchase.
This is particularly the case for the welding machine: Technomig 215 Dual Synergic.
Available for order
Telwin
Reference: 802037
€61.29
49,83 € tax excl.
Fast delivery
2-year warranty
This kit allows your Telwin welding unit, whose references are indicated below, to accept welding wire spools of Ø 100 mm.
It contains:
This kit fits the following TELWIN units:
Bimax 132-152-162-4.135-4.195
Telmig 150/1- 170/1 - 180/2 -195/2 -200/2 -203/2 -250/ 2 - 251/2 - 281/2
Mastermig 200/2 - Technomig Synergic Dual 150 - 180 -210- 215
Electromig 220 Synergic - Technomig 223 Treo Synergic - Technomig 225.
Available for order
Telwin
Reference: 722130
€24.55
19,96 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for flux-cored steel MIG welding wire Ø 0.8 - 0.9 - 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 230 and 243 WAVE -240 - 260
ELECTROMIG 220 Synergic - 230 - 300 SYN. - 330 WAVE
TELMIG 281/2 TURBO
MASTERMIG 220/2 - 270/2 - 300
Available for order
Telwin
Reference: 742090
€21.01
17,08 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for aluminium MIG welding wire Ø 0.8-1 mm
Compatible with TELWIN welding machines:
TECHNOMIG 215 Dual Synergic - 225 - 240 - 260
ELECTROMIG 220 Synergic - 230 - 330 WAVE
MASTERMIG 220/2 - 270/2 - 300
Available for order
Telwin
Reference: 742575
€12.82
10,42 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2
Available for order
Telwin
Reference: 742054
€15.89
12,92 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 1- 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic - 300 syn. - 230 - 330 wave-300 syn. -
MASTERMIG 220/2 - 270/2 - 300
TELMIG 281/2
Available for order
Telwin
Reference: 802817
€97.38
79,17 € tax excl.
Fast delivery
2-year warranty
This kit is required for aluminium welding.
This welding is performed under pure argon shielding gas.
This kit is used for aluminium MIG-MAG welding with Telwin machines: Technomig 215 Dual Synergic - Electromig 220 Synergic and 230 Wave
It includes:
1 wire liner guide - 1 wire feed roller 0.8 / 1 mm - 3 contact tips Ø 0.8 mm and 1 mm.
Supplier stock
Telwin
Reference: 803059
€333.12
270,83 € tax excl.
or 4 x 83,28 €
Free delivery
2-year warranty
This trolley is the ideal way to move your welding machine.
It is a 2-in-1 trolley: welding machine + gas cylinder on the same support.
Welding machine up to 55 cm in height
Assembled dimensions: 560 X 480 X H 1100 mm
Gas cylinder maximum 4 m3.
The cylinder and the welding machine are secured to the trolley with straps (included).
Trolley sold unequipped.
The price shown does not include the gas cylinder or the welding machine.
Delivered unassembled.
Available for order
Telwin
Reference: 802067
€13.28
10,80 € tax excl.
Fast delivery
2-year warranty
Gas hose length 2 m + 2 hose clamps + 1 diameter reducer fitting.
This gas hose connects the regulator for refillable cylinders to your MIG or TIG welding machine.
The fitting (shown in the photo) allows the connection between this gas hose for refillable cylinders and a Ø 4 mm hose for disposable cylinders.
Available for order
Telwin
Reference: 742485
€12.92
10,50 € tax excl.
Fast delivery
2-year warranty
Electrode for welding corrugated wires for dent puller
Available for order
Telwin
Reference: 804155
€197.31
€219.24
160,42 € tax excl.
or 3 x 65,77 €
Free delivery
2-year warranty
Replacement PH type torch for Telwin Technology 41 XT plasma cutter
EURO connector
Max current: 50 A @35%
Max cutting thickness: 18 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length: 4 m
Available for order
Telwin
Reference: 804156
€203.97
165,83 € tax excl.
or 3 x 67,99 €
Free delivery
2-year warranty
Replacement PK type torch for Telwin Technology 54 XT plasma cutter
EURO connector
Max current: 35 A @35%
Maximum cutting thickness 10 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length 4 m
Supplier stock
Telwin
Reference: 804041
€608.85
495,00 € tax excl.
or 4 x 152,21 €
Free delivery
2-year warranty
This manual plasma torch TWIN PV is suitable for the TELWIN plasma cutter: Superior Plasma 70
It is supplied with a 70 A nozzle.
Length: 6 m
Supplier stock
Telwin
Reference: 802955
€958.38
779,17 € tax excl.
or 4 x 239,60 €
Free delivery
2-year warranty
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Available for order
Telwin
Reference: V-TIGER
€6.67
5,42 € tax excl.
Fast delivery
2-year warranty
Below you will find the 2 lenses available for the Telwin Tiger Top welding helmet.
Dimension 110 90 mm
1 shade lens (Din 11) for eye protection: Reference 802851
2 clear lenses for protecting the shade lens from welding spatter: Reference 802655
| Combinations | Price | |
| €6.67 | ||
| €8.20 | ||
Available for order
Telwin
Reference: 801097
€240.87
195,83 € tax excl.
or 3 x 80,29 €
Free delivery
2-year warranty
This kit includes:
TIG torch ST9V 4M AX25 / 722563
250A TOLEDO 250 earth clamp / 712030
16mm cable 3 metres / 123443
Atlas 25mmq plug / 712039
2-gauge pressure reducer 12L/min / 722119
Argon bottle adapter / 432036
Supplier stock
Telwin
Reference: 816236
€347.48
€434.35
282,50 € tax excl.
or 4 x 86,87 €
Free delivery
2-year warranty
Key features of the Telwin 211/S welding machine:
Welding current display
Robust and elevated protection against dust, water and dirt
Welds rutile, basic, stainless steel and cast iron electrodes from Ø 1.6 to 4 mm
High duty cycle (20°C): 180A @95%
Compact and powerful: 10-180A single-phase (230V)
Two welding processes: MMA / Lift TIG
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Easy to transport thanks to its carry case
Made in Italy
2-year warranty
This machine is supplied in a carry case and includes:
1 electrode holder + cable (length 180 cm, cross-section 25 mm²)
1 ground clamp + cable (length 180 cm, cross-section 25 mm²)
1 power supply cable with plug, length 2 m
This product is Euro Welding's choice
Available for order
Telwin
Reference: 816231
€849.89
691,00 € tax excl.
or 4 x 212,47 €
Free delivery
2-year warranty
Semi-automatic multi-process MIG-MAG welding machine
This welding machine uses spool wire. This welding process allows welding of thin material (0.6 mm).
Very practical on thin sheet metal (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.
With the addition of a shielding gas, this machine enables welding of aluminium, stainless steel and steels in MIG-MAG mode.
MIG welding under gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.
Special case: For steel, it is possible to weld without gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of steel sheets must not be less than 1.2 mm without risk of burn-through.
This machine uses wire spools of Ø 100 and 200 mm.
It is supplied with
1 MIG torch 180 A EURO connector (cable length 3 m) + 1 earth clamp (cable length 1.9 m).
1 reversible roller for steel - stainless steel wire Ø 0.6 / 0.8 mm.
1 gas hose length 1 m + hose clamp. This hose fits onto a regulator for refillable cylinders.
Its Plus Points!
Storage compartment for the torch and earth clamp.
Optional
Electrode holder for coated rod welding.
TIG torch for welding steel and stainless steel, touch start ignition
For connecting the machine to gas, it is recommended to use the 804208 fitting.
Supplier stock
Telwin
Reference: 816255 + 804362
€1,952.80
1 587,67 € tax excl.
or 4 x 488,20 €
Free delivery
2-year warranty
Available for order
Telwin
Reference: 802491
€275.73
224,17 € tax excl.
or 3 x 91,91 €
Free delivery
2-year warranty
This kit includes:
Available for order
Telwin
Reference: 816232
€1,035.41
€1,113.34
841,83 € tax excl.
or 4 x 258,85 €
Free delivery
2-year warranty
This tri-technology unit allows you, with a single machine, to weld in MMA, semi-automatic (MIG-MAG) and TIG modes.
MMA (electrode) and TIG welding solutions are available as options.
As standard, this semi-automatic unit features 17 programmed settings. The user simply needs to select the type of metal and the wire diameter. It is also possible to weld in manual mode by directly adjusting the settings parameters.
This welding unit uses wire on a spool. This welding process allows welding of thin materials (0.6 mm).
Very practical on thin sheets (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.
With the addition of a shielding gas, this unit enables welding on aluminium, stainless steel and steels in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.
Using a suitable wire of the CU Si3 type, it enables welding of HSS, EHS, UHS steels (automotive bodywork)
MIG welding with gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.
Special case: For steel, it is possible to weld without gas when using flux-cored wire (which allows, for example, easier outdoor use). In this case, the thickness of the steel sheets must not be less than 1 mm to avoid the risk of burn-through.
This unit uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). An adapter for Ø 100 mm spools is available as an option.
Upon delivery, this unit includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless steel wire Ø 0.6 and 0.8 mm.
1 steel/stainless steel contact tip Ø 0.8 mm
1 gas hose for refillable cylinder
TIG welding with gas shielding requires the use of pure Argon gas for welding steels, stainless steels, ferrous alloys and copper...
As an option:
It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes from Ø 1.6 mm to 4 mm.
Reference KIT000514
It is possible to add a TIG torch 4 m in length in order to weld in TIG mode using pure Argon shielding gas.
For connecting the unit to gas, it is recommended to use the 804208 fitting.
Available for order
Telwin
Reference: 816057
€1,276.27
€1,595.33
1 037,64 € tax excl.
or 4 x 319,07 €
Free delivery
2-year warranty
This tri-process machine allows you to weld in MMA, semi-automatic (MIG-MAG) and TIG mode with a single unit.
MMA (electrode) and TIG welding solutions are available as options.
As standard, this semi-automatic machine has 17 programmed positions. The user simply selects the type of metal and the wire Ø. It is also possible to weld in manual mode by directly adjusting the setting parameters.
This welding machine uses spool wire for welding. This welding process allows welding of thin materials (0.6 mm).
Very practical on thin sheet metal (automotive body panels, chassis...), it avoids the weld bead restart that occurs when changing an electrode.
With the addition of a shielding gas, this machine allows welding of aluminium, stainless steel and steel in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.
Using a suitable CU Si3 type wire, it enables welding of HSS, EHS, UHS steels (automotive body panels)
MIG welding under gas shielding requires the use of pure Argon gas for welding aluminium or an Argon + CO² mixture for steel and stainless steel.
Special case: For steel, it is possible not to use gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of the steel sheets must not be less than 1 mm without risk of burn-through.
This machine uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). Optionally, an adapter for Ø 100 mm spools is available.
Upon delivery this machine includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless wire Ø 0.6 and 0.8 mm.
1 steel/stainless contact tip Ø 0.8 mm
1 gas hose for refillable cylinder length 1 m
TIG welding under gas shielding requires the use of pure Argon gas for welding steel, stainless steel, ferrous alloys and copper....
Optional:
It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes of Ø 1.6 mm to 4 mm.
Reference KIT000514
It is possible to add a TIG torch with a length of 4 m in order to weld in TIG mode using pure Argon shielding gas.
Available for order
Telwin
Reference: 816040
€1,428.34
1 161,28 € tax excl.
or 4 x 357,09 €
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) on steel, stainless steel, cast iron, copper, nickel, and titanium.
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It comes with a 140A trigger TIG torch 4 m in length + ground clamp.
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High-frequency NO-CONTACT arc starting
TIG 2T/4T (manual or automatic welding)
TIG SPOT allows tack welding of parts before welding.
HOT START adjustable: additional starting power when an electrode is difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overload and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
(automatically adjusted by the microprocessor according to the current intensity and welding duration.
It also features the PULSE function, particularly suited for welding thin sheets where low heat input to the welded workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision also improves.
THINSPOT function, enabling fast and precise spot welding.
For connecting the machine to gas, it is recommended to use fitting 804208.
Supplier stock
Telwin
Reference: 816040 + 802788
€1,521.68
1 237,17 € tax excl.
or 4 x 380,42 €
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) on steel, stainless steel, cast iron, copper, nickel and titanium.
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It is supplied with a 140A TIG torch with trigger, 4 m in length + earth clamp.
It also features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High-frequency NO-CONTACT arc striking
TIG 2T/4T( manual or automatic welding)
TIG SPOT allows tack welding of parts before welding.
HOT START adjustable: additional striking power when an electrode is difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor according to the current intensity and welding duration.
It also features the PULSE function, particularly suited for welding thin sheets where low heat input to the workpiece is required, and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision as well.
THINSPOT function, enabling fast and precise spot welding.
Supplied with
1 TIG ST 26 torch, length 4 m.
1 double-gauge regulator for refillable cylinder.
1 earth clamp + 25 mm² cable, length 3 m
1 rubber gas hose, length 2 m.
For the gas connection of the machine, it is recommended to use connector 804208.
Available for order
Telwin
Reference: 816076
€1,932.28
€2,146.98
1 570,99 € tax excl.
or 4 x 483,07 €
Free delivery
2-year warranty
Multi-process machine allowing MMA - MIG - TIG welding.
Multi-process MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine controlled by microprocessor.
The WAVE OS system makes welding operations: customisable according to user requirements; traceable and analysable, thanks to data recording on USB; simplified, thanks to synergic parameter adjustment and the presence of specific programs for materials to be welded.
Features:
- 55 customisable programs,
- continuous and pulsed operation,
- user-friendly interface with colour TFT screen,
- Wave OS operating system with pulsed welding programs for specific materials (AB Pulse for aluminium and galvanised sheet metal) and low heat input for thin thicknesses (ATC).
Supplied with 250 A torch length 3 m duty cycle 200 A@60%, and earth clamp + cable 3 m
Available for order
Telwin
Reference: 816255
€1,685.27
1 370,17 € tax excl.
or 4 x 421,32 €
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) on steel, stainless steel, copper, nickel ...including aluminium .
It also allows continuous or pulsed welding with rutile or basic electrodes (MMA welding kit optional).
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High-frequency contactless arc starting
TIG 2T/4T (manual or automatic welding)
TIG SPOT allows tack welding of parts before welding.
HOT START adjustable: additional starting power for electrodes that are difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc extinction, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor based on the current intensity and welding duration.
VRD: Improves safety during welding operations in damp environments
It also features the PULSE function, particularly suitable for welding thin plates where low heat input to the workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision as well.
It also features the EASY PULSE system, enabling immediate pulsed welding even if the welder is not accustomed to TIG welding, thanks to automatic parameter adjustment
THINSPOT function, enabling fast and precise spot welding.
For connecting the machine to the gas cylinder, it is recommended to use the 804208 fitting, which is positioned at the rear of the welding machine.
Available for order
Telwin
Reference: 816056
€1,310.97
1 065,83 € tax excl.
or 4 x 327,74 €
Free delivery
2-year warranty
The Technomig 260 Dual Synergic is a welding machine (MIG-MAG / FLUX / BRAZING / MMA / TIG-Lift) of 250A.
It is easy to use thanks to One Touch technology.
With its versatility, Technomig 260 Dual Synergic allows operation on different thicknesses and various welded and braze-welded materials, making it the ideal tool for many fields of application, from maintenance to heavy steelwork and bodywork.
It is possible to manually adjust the arc length to modify the shape of the weld bead according to the operator's style and preferences
One Touch
Setting up the Technomig 260 Dual Synergic is simple and immediate: just program the material thickness and start welding. The 25 synergic curves provided for different gases and materials allow quality welds on steel, stainless steel, aluminium and galvanized sheet metal without wasting time on machine adjustments.
ATC
This process allows welding of thin thicknesses with great ease, reducing material distortion
Arc stability even at low currents.
Fast and precise spot welding
facilitates edge-to-edge sheet metal welding
Delivered with:
1 MIG-MAG torch 250 A length 3 m
1 reversible roller for steel/stainless wire Ø 0.6/0.8 mm
1 gas hose length 1 m
1 earth clamp + cable length 3 m
For connecting the machine to gas, it is recommended to use fitting 804208.
Available for order
Telwin
Reference: 802050
€26.66
€29.62
21,67 € tax excl.
Fast delivery
2-year warranty
For TIG welding (Steel, Stainless steel, Aluminium) and MIG/MAG semi-automatic welding (WIRE) (Aluminium). Specifications: Volume: 950 cc Pressure: 60 bar at 20°C Contents: 60 L max Output valve: M10 Weight: 1120 g Pressure test: PH 165 bar
Available for order
Telwin
Reference: 802936
€142.47
115,83 € tax excl.
Free delivery
2-year warranty
Automatic welding headband mask for MMA, MIG-MAG and TIG welding, with adjustable darkening (DIN 4/5 ÷ 9/9÷13).
The LCD liquid crystal filter automatically darkens when the welding arc appears and quickly returns to its transparent state when it stops, eliminating the need to lift and lower the mask at each work break, allowing hands-free operation.
In addition to adjusting the filter sensitivity depending on the welding process, it also features external adjustment of the delay time for switching from dark to light state after the arc stops, depending on the brightness of the workpiece.
Features:
- lightweight and comfortable,
- adjustable auto-darkening filter,
- XL viewing area 100 x 67 mm
- 4 sensors
- dark-to-light delay adjustment,
- battery and solar powered,
- transparent glass filter protection.
Optical class 1/1/1/2
Available for order
Telwin
Reference: 802937
€162.98
€203.72
132,50 € tax excl.
or 3 x 54,33 €
Free delivery
2-year warranty
Automatic darkening welding headband mask for MMA, MIG-MAG and TIG welding, with adjustable shade control (DIN 4/5 ÷ 9/9÷13).
The LCD liquid crystal filter darkens automatically when the welding arc appears and quickly returns to a transparent state when it stops, eliminating the need to raise and lower the mask at each work pause and thus allowing hands-free operation.
In addition to adjusting the filter sensitivity according to the welding process, it also features external adjustment of the delay time for switching from dark to light state after the arc stops, depending on the brightness of the workpiece.
Features:
- lightweight and comfortable,
- adjustable auto-darkening filter,
- XXL viewing area, 100 x 93 mm
- 4 sensors,
- dark-to-light delay adjustment,
- battery and solar powered,
- clear glass filter protection.
Optical class 1/1/1/2
This welding mask requires two CR2032 batteries during use (included at the time of sale)
Supplier stock
Telwin
Reference: 816209+802788
€2,752.12
€3,057.92
2 237,50 € tax excl.
or 4 x 688,03 €
Free delivery
2-year warranty
TIG AC/DC inverter welding machine (HF or LIFT), PULSED TIG (PULSE and EASY PULSE) and MMA.
Compatible with various types of materials such as steel, stainless steel, aluminum, titanium, copper, nickel, magnesium and their alloys.
Designed to guarantee excellent results on any thickness, even the finest, the PULSE mode (including the simplified EASY PULSE version) reduces material distortion by ensuring high arc stability.
Advanced functions: MIX AC-DC for preparing AC welding of large-mass workpieces; THINSPOT for spot welding of very thin sheet metal.
The CL screen facilitates interaction with the product and simplifies the adjustment of multiple TIG welding curve parameters depending on the job.
Ability to save and recall custom programs.
Electrode welding in both continuous and pulsed mode (MMA Pulse), guaranteeing excellent results with basic electrodes and in positional welding.
Designed to guarantee long-term reliability, it features a dedicated air tunnel cooling system that protects against dust and dirt.
Specifications:
TIG
MMA
Other specifications:
Supplied with TIG welding accessories.
1 TIG torch ST 26, length 4 m.
1 regulator with 2 pressure gauges for refillable cylinder.
1 ground clamp + 25 mm² cable, length 3 m
1 gas hose, length 2 m
Supplier stock
Telwin
Reference: 816036
€1,581.57
1 285,83 € tax excl.
or 4 x 395,39 €
Free delivery
2-year warranty
The advantages of the Telwin Superior 320 CE VRD welding machine:
Duty cycle: 270A @35%
Welds cellulosic, aluminium, rutile, basic, stainless steel, cast iron electrodes
Robust and easy to adjust with its digital display
Two welding processes: VRD / MMA / Lift TIG
Current range: 10 - 270 A (400V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Made in Italy
2-year warranty
Delivered without accessories
Available for order
Telwin
Reference: 816208
€1,885.13
€2,094.59
1 532,66 € tax excl.
or 4 x 471,28 €
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) steel, stainless steel, copper, nickel ...including aluminium .
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High frequency CONTACTLESS ignition
TIG 2T/4T (manual or automatic welding)
TIG SPOT allows tacking of parts before welding.
HOT START adjustable: additional starting power for electrodes that are difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor according to the current intensity and the welding duration.
VRD: Improves safety during welding operations in damp environments
It also features the PULSE function particularly suited for welding thin plates where low heat input to the workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision improves as well.
It also features the EASY PULSE system allowing immediate pulsed mode welding even if the welder is not familiar with TIG welding, thanks to automatic parameter adjustment
THINSPOT function, enabling fast and precise spot welding.
For gas connection of the machine, it is recommended to use fitting 804208.
Supplier stock
Telwin
Reference: 816156
€2,044.88
€2,556.10
1 662,50 € tax excl.
or 4 x 511,22 €
Free delivery
2-year warranty
Key features of the Telwin Superior 400 CE VRD welding machine:
Gouging function
Duty cycle: 400A @40%
Welds carbon cellulosic, aluminium, rutile, basic, stainless steel and cast iron electrodes
Robust and easy to set up with its digital display
Two welding processes: MMA / Lift TIG
Current range: 10 - 270 A (400V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Made in Italy
2-year warranty
Supplier stock
Telwin
Reference: 816208+802788
€2,193.67
1 783,50 € tax excl.
or 4 x 548,42 €
Free delivery
2-year warranty
This unit enables welding with tungsten electrodes (TIG welding) on steel, stainless steel, copper, nickel...including aluminium.
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It comes with a 140A TIG torch with trigger, 4 m in length, plus a ground clamp.
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High-frequency arc starting WITHOUT CONTACT
TIG 2T/4T (manual or automatic welding)
TIG SPOT enables tack welding of parts prior to welding.
HOT START adjustable: additional starting power for electrodes that are difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc extinction, thereby preventing crater formation at the end of the weld bead.
ARC FORCE: This process increases amperage when the welding arc is held short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: when welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics.
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor based on the current intensity and welding duration.
VRD: Improves safety during welding operations in damp environments
It also features the PULSE function, particularly suitable for welding thin sheet metal where low heat input to the workpiece is required, and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision improves as well.
It also features the EASY PULSE system, allowing immediate welding in pulsed mode even if the welder is not accustomed to TIG welding, thanks to automatic parameter adjustment.
THINSPOT function, enabling fast and precise spot welding.
For connecting the unit to gas, it is recommended to use fitting 804208.
Available for order
Telwin
Reference: 816258
€603.72
€670.81
490,83 € tax excl.
or 4 x 150,93 €
Free delivery
2-year warranty
The advantages of the Telwin Technology 238XT CE/MPGE welding unit:
Welds cellulosic 6010 and aluminium electrodes in addition to Rutile, Basic, Stainless Steel, and Cast Iron
Digital display
More power for intensive use (40°C): 200A @35%
Ideal for difficult situations and harsh environments
Designed to withstand impacts: Shock protection and metal handle
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 5–200A single-phase (230V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Delivered in a carry case
Made in Italy
2-year warranty
This unit is delivered in a carry case and includes:
1 electrode holder + cable (length 3m, cross-section 25 mm²) Ø 50
1 ground clamp + cable (length 2m, cross-section 25 mm²) Ø 50
1 power cable with plug, length 2m, no plug
Available for order
Telwin
Reference: 816249
€613.97
€877.10
499,16 € tax excl.
or 4 x 153,49 €
Free delivery
2-year warranty
Key features of the Telwin Technology 227XT MV/PFC VRD welder:
Multivoltage: compatible with all voltages (100/120V, 200V, 220/240V)
MV/PFC - maximum performance from a 230V 16A outlet
Welds rutile, basic, stainless steel and cast iron electrodes
Digital display
Higher power output for intensive use (40°C): 200A @30%
Ideal for demanding situations and harsh environments
Designed to withstand impacts: anti-shock protection and metal handle
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 10–200A single-phase (230V)
Technologies: Inverter, PFC, VRD, Arc Force, Hot Start, Anti Stick
Supplied in a carry case
Made in Italy
2-year warranty
This unit is supplied in a carry case and includes:
1 electrode holder + cable (length 3m, cross-section 25 mm²) Ø 50
1 ground clamp + cable (length 2m, cross-section 25 mm²) Ø 50
1 power cable with plug, length 2m, no plug
Available for order
Telwin
Reference: 816060
€2,045.04
€2,272.26
1 662,66 € tax excl.
or 4 x 511,26 €
Free delivery
2-year warranty
Multi-process Synergic Inverter welding machine with an adjustment range of 10 to 240 A enabling the following welding processes:
1) Semi-automatic (welding wire) MIG-MAG, supports the use of steel, stainless steel, aluminium, brazing wire (special for automotive sheet metal) with the appropriate gas, and flux-cored wire for welding steel without gas.
The PULSE process guarantees high execution speed, excellent penetration and cleanliness, as well as welding in all positions.
This process is particularly recommended for welding thin aluminium and stainless steel.
Wire driven by a motor with 4 drive rolls.
The ROOT-MIG process makes it easier to weld sheet metal edge-to-edge, even with wide gaps (also in TIG welding mode).
2) Basic and rutile electrode rods from Ø 1.6 to 6 mm. (electrode holder optional)
3) Lift TIG start for welding steel, stainless steel and ferrous alloys. (TIG torch optional).
The ATC process is highly effective when welding thin materials (0.5 - 0.8 mm), as it reduces metal distortion caused by heat build-up.
The price includes in addition to the machine:
1 MIG/MAG torch 250A with a length of 3 m fitted with a 0.8 mm contact tip.
1 reversible drive roll for steel wire 0.6 / 0.8 mm (mounted on the machine).
1 earth clamp and cable
This product is Euro Welding's choice
Available for order
Telwin
Reference: 816065
€2,775.35
€2,921.42
2 256,41 € tax excl.
or 4 x 693,84 €
Free delivery
2-year warranty
Multi-process Synergic Inverter welding machine with an adjustment range of 20 to 300 A, enabling:
1) Semi-automatic (welding wire) MIG-MAG, allows the use of steel, stainless steel, aluminium, brazing wire (special automotive body) with the appropriate gas, and flux-cored wire for welding steel without gas.
The ATC process guarantees less distortion of thin metals, fast and precise spot welding.
Wire driven by a motor with 4 rollers.
Excellent results on steel, stainless steel and brazing. Effective for welding aluminium.
2) Basic and rutile electrode rods from Ø 1.6 to 6 mm (electrode holder optional)
3) TIG Lift arc start for welding steel, stainless steel and ferrous alloys (TIG torch optional).
The ATC process is very effective when welding thin materials (0.5 - 0.8 mm), as it helps reduce metal distortion caused by heat build-up.
The price includes, in addition to the machine:
1 MIG/MAG torch 3 m long fitted with a 0.8 mm contact tip.
1 reversible roller for 0.6 / 0.8 mm steel wire (mounted on the machine).
1 earth clamp and cable
For connecting the machine to gas, it is recommended to use fitting 804208.
Available for order
Telwin
Reference: 850020
€849.72
€913.68
690,83 € tax excl.
or 4 x 212,43 €
Free delivery
2-year warranty
This device uses an instantaneous electrochemical reaction to restore the shine of stainless steel.
It eliminates the discoloration and oxidation effects that form during the welding process.
Compact and lightweight, it is easy to transport.
It also allows marking on stainless steel (optional).
In addition to the device, the delivery includes the small case shown in the photo containing:
1 L of Clean-IT
1 L of Brush-it
1 pot with lid
10 cleaning pads + fixing clips
1 wedge-shaped tool dedicated to the use of the cleaning pads
1 brush and fixing support
Supplier stock
Telwin
Reference: 816803 ou 816135
€7,170.05
5 829,34 € tax excl.
Free delivery
2-year warranty
This unit enables welding of steel, stainless steel and aluminum; ignition is either HF or LIFT type.
Its adjustment range is 5 to 350 A - Max current 350 A @35%
In MMA welding, it allows the use of electrodes from Ø 1.6 to 6 mm.
It also features the PULSE function, particularly suited for welding thin sheets where low heat input is required and adapted for welding in all positions.
When the pulse frequency increases, arc stability increases and therefore welding precision as well.
It also features the EASY PULSE system, allowing immediate pulsed welding even if the welder is not familiar with TIG welding, thanks to automatic parameter adjustment
THINSPOT function, enabling fast and precise spot welding.
It features the following functions:
TIG LIFT : Facilitates electrode striking.
TIG HF High-frequency CONTACTLESS ignition
TIG 2T/4T( manual or automatic welding)
TIG SPOT allows tack welding of parts before welding.
HOT START adjustable: additional starting power for electrodes that are difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc extinction, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overload and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor according to the current intensity and welding duration.
VRD : Improves safety during welding operations in wet environments
It also features the PULSE function, particularly suited for welding thin sheets where low heat input is required and adapted for welding in all positions.
When the pulse frequency increases, arc stability increases and therefore welding precision as well.
It also features the EASY PULSE system, allowing immediate pulsed welding even if the welder is not familiar with TIG welding, thanks to automatic parameter adjustment
THINSPOT, function enabling fast and precise spot welding.
Supplied with
1 water-cooled TIG torch ST 18A length 4 m.
1 dual-gauge regulator for refillable cylinder.
1 ground clamp + 25 mm² cable length 3 m
1 gas hose length 2 m
1 cart
1 cooling unit (coolant optional)
Available for order
Telwin
Reference: 816039
€814.87
€905.42
662,50 € tax excl.
or 4 x 203,72 €
Free delivery
2-year warranty
Key features of the Telwin Superior 250 Tri welding machine:
High efficiency: 220A @25%
Welds rutile, basic, stainless steel and cast iron electrodes
Compact and lightweight (8.4 kg)
Robust and easy to adjust with potentiometer
Two welding processes: MMA / Lift Contact
Current range: 10 - 250 A
Technologies: Arc Force, Hot Start, Anti Stick
Made in Italy
2-year warranty
Delivered without accessories
Supplier stock
Telwin
Reference: 829564
€85.07
€94.53
69,17 € tax excl.
Fast delivery
2-year warranty
Multifunction 12V lithium jump starter and power bank. Equipped with: USB A output for recharging electronic devices (smartphones, tablets, etc.); USB C input for recharging the device; high-intensity LED lamp with thre
Supplier stock
Telwin
Reference: 829568
€134.28
€149.20
109,17 € tax excl.
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1250 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Quick r
Available for order
Telwin
Reference: 829569
€156.83
€174.25
127,50 € tax excl.
or 3 x 52,28 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Quick r
Supplier stock
Telwin
Reference: 829574
€188.60
€209.56
153,33 € tax excl.
or 3 x 62,87 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Wireless i
This product is Euro Welding's choice
Available for order
Telwin
Reference: 816250
€480.72
390,83 € tax excl.
or 4 x 120,18 €
Free delivery
2-year warranty
Key features of the Telwin Technology 186XT welder:
Ideal for demanding situations and harsh environments
Designed to withstand impacts: anti-shock protection and metal handle
Duty cycle for intensive use (20°C): 160A @35%
Welds rutile, basic, stainless steel and cast iron electrodes from Ø 1.6 to 4 mm
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 5–160A single-phase (230V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Supplied in a carry case
Made in Italy
2-year warranty
This unit is supplied in a carry case and includes:
1 electrode holder + cable (length 3m, cross-section 25 mm²) Ø 50
1 ground clamp + cable (length 2m, cross-section 25 mm²) Ø 50
1 power cable with plug, length 2m
Supplier stock
Telwin
Reference: 829575
€192.71
€214.12
156,67 € tax excl.
or 3 x 64,24 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1800 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Compresso
Available for order
Telwin
Reference: 816211
€302.37
245,83 € tax excl.
or 4 x 75,59 €
Free delivery
2-year warranty
Key features of the Telwin 168 MPGE welder:
Easy to use and adjust with front-panel potentiometer
Welds rutile, basic, stainless steel and cast iron electrodes
High duty cycle (20°C): 150A @60%
Two welding processes: MMA / Lift TIG
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Easy to transport thanks to its carry case
230V – 16A power supply (can be used with 3kW domestic meters)
Made in Italy
2-year warranty
This unit is supplied in a carry case and includes:
1 electrode holder + cable (length 3m, cross-section 16 mm²)
1 ground clamp + cable (length 2m, cross-section 16 mm²)
1 power cable with plug, length 2m
Supplier stock
Telwin
Reference: 829384
€633.46
€703.84
515,01 € tax excl.
or 4 x 158,37 €
Free delivery
2-year warranty
Battery charger and starter for 12 / 24 V WET batteries
Quick start for all types of cars, vans and light trucks.
570A max.
Normal charge, fast charge (BOOST) and quick start selection.
Charge and start current display.
Overcharge and reverse polarity protection.
Charging power: 2 KW.
Starting power: 10 KW.
Effective charging current: 90 A.
Max starting current: 570A.
Dimensions: 36.5x46x75.5cm.
Weight: 24KG.
Available for order
Telwin
Reference: 804214
€25.12
20,42 € tax excl.
Fast delivery
2-year warranty
This bag provides protection during transport or when your welding helmet is not in use.
Telwin
Reference: 816284
€2,971.42
2 415,79 € tax excl.
or 4 x 742,86 €
Free delivery
2-year warranty
TECHNOMIG 223 TREO SYNERGIC 230V TELWIN WELDING MACHINE
Inverter multiprocess welding machine MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift controlled by microprocessor.
Particularly designed for bodywork applications, it allows immediate use of three different torches, two traditional MIG torches and one spool gun.
This feature enables direct intervention on different materials without needing to replace the torch and wire spool.
The traditional MIG torches are designed for welding steel, high-strength HLE steels, as well as stainless steel and braze-welding of galvanised sheets; the spool gun torch is specifically designed for aluminium even at a significant distance from the generator.
The SYNERGIC quick adjustment of welding parameters, thanks to ONE TOUCH LCD SYNERGY technology, makes the product very easy to use.
ATC technology, Made in Telwin, makes it easy to achieve excellent welds on thin thicknesses thanks to advanced arc control. It is also possible to intervene manually on arc length: this adjustment allows the shape of the weld bead to be modified according to the welder's style.
The ONE TOUCH LCD graphic display enables better reading of all welding parameters.
Characteristics:
- 17 pre-set synergic curves
- LCD screen display of welding parameters
- 2/4 stroke, spot operation selection
- Thermostatic, overvoltage, undervoltage, overcurrent, motor-generator protections (+/- 15%).
Supplied with:
1x Cable with earth clamp (3 metres) 16 mm² - 10/25 connectors
1x MIG torch MB15 STEEL (3 metres) Euro connector
1x MIG torch MB15 ALU (3 metres) - Euro connector
1x SPOOL GUN torch M6
1x Gas hose
1 Set of 2 drive rolls for steel or stainless wire Ø 0.6 / 0.8 mm (mounted on the machine).
User manual
2-YEAR WARRANTY
Available for order
Telwin
Reference: 816259
€558.63
454,17 € tax excl.
or 4 x 139,66 €
Free delivery
2-year warranty
Key features of the Telwin Technology 236XT welding machine:
More power for intensive use (40°C): 200A @35%
Ideal for demanding situations and harsh environments
Designed to withstand shocks: Anti-shock protection and metal handle
Welds rutile, basic, stainless steel and cast iron electrodes from Ø 1.6 to 4 mm
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 5-200A single phase (230V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Supplied in a carry case
Made in Italy
2-year warranty
This machine is supplied in a carry case and includes:
1 electrode holder + cable (length 3m, section 25 mm²) Ø 50
1 earth clamp + cable (length 2m, section 25 mm²) Ø 50
1 power supply cable with plug, length 2m
Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
