Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
Lincoln Electric
Reference: WP403676-14
Lincoln - Pack of 2 anti-sweat headbands EuropurePlus 5500 LS
€26.14
21,25 € tax excl.
Fast delivery
2-year warranty
Lincoln welding machine: Lincoln Electric catalogue at EURO-WELDING
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
Available for order
Lincoln Electric
Reference: WP403676-15
Lincoln - Pack of 2 Rear Comfort Cushions Headband EuropurePlus
€19.16
15,58 € tax excl.
Fast delivery
2-year warranty
Save €80.00
Supplier stock
Lincoln Electric
Reference: PLSP180A
PACK: LINCOLN 180C welding machine + 3 m torch + regulator + gas + trolley
€1,983.33
€2,063.33
1 612,46 € tax excl.
or 4 x 495,83 €
Free delivery
2-year warranty
This pack contains: - Speedtec 180 C K14098-1 welding machine - W10430-25 torch - Two-gauge regulator 094200 - F11885M trolley - Rechargeable Argon/CO2 Enermix C15 cylinder
Supplier stock
Lincoln Electric
Reference: W000271211-1
Battery charger for Zephir powered air-purifying respirator helmet
€103.94
84,50 € tax excl.
Fast delivery
2-year warranty
Lincoln | Replacement battery for Zephir powered air-purifying respirator helmet
Save €80.00
Supplier stock
Lincoln Electric
Reference: PLSP200B
PACK: LINCOLN 200C Welder + 3 m Torch + Regulator + Gas
€2,233.42
€2,313.42
1 815,79 € tax excl.
or 4 x 558,36 €
Free delivery
2-year warranty
This pack includes
1 Lincoln multi-process welder SPEEDTEC 200C
1 MIG-MAG torch 3 m long LGS 250
1 Refillable gas cylinder for steel welding, capacity 2.3 m3
1 Two-gauge regulator Le Lorrain
Save €80.00
Supplier stock
Lincoln Electric
Reference: PLSP200A
PACK: LINCOLN 200C welder + 3 m torch + Regulator + Gas + trolley
€2,413.83
€2,493.83
1 962,46 € tax excl.
or 4 x 603,46 €
Free delivery
2-year warranty
This pack includes
1 Lincoln SPEEDTEC 200C multi-process welder
1 MIG-MAG torch 3 m length LGS 250
1 AMERICA welder + cylinder transport trolley
1 Rechargeable gas cylinder for steel welding, capacity 2.3 m3
1 Le Lorrain 2-gauge regulator
Save €80.00
Supplier stock
Lincoln Electric
Reference: PLSP180B
PACK: LINCOLN 180C Welding Machine + 3 m Torch + Regulator + Gas
€1,802.92
€1,882.92
1 465,79 € tax excl.
or 4 x 450,73 €
Free delivery
2-year warranty
This pack contains: - Speedtec 180 C welding machine K14098-1 - W10430-25 torch - Two-gauge regulator 094200 - Rechargeable Argon/Co2 Enermix C15 cylinder
Supplier stock
Lincoln Electric
Reference: K14037-1
LINCOLN COOL ARC 25 Cooling Unit
€613.98
499,17 € tax excl.
or 4 x 153,50 €
Free delivery
2-year warranty
Water cooling system for use with conventional and CV Powertec generators.
Equipped with an input cable with plug for 230V 50/60Hz power supply.
The quick connect/disconnect function makes changing MIG torches achievable in just a few seconds.
Coolant level inspection window.
Specifications
- Equipped with an input cable with a 16A Schuko plug for 230V 50/60Hz power supply.
- The quick connect/disconnect function makes changing MIG torches achievable in just a few seconds.
- Tank capacity of 8.5 liters
- Coolant level inspection window.
- Vertical position
- Lincoln Electric FREEZCOOL recommended coolant W000010167.
Dimensions: 748 X 238 X 148 mm
Weight: 17 kg
Capacity: 8.5 L
Warranty: 3 years
For use with Powertec® 365S, 425S, 505S and CV generators.
can operate independently, by plugging into a 16A power outlet.
Available for order
Lincoln Electric
Reference: W10430-25
LINCOLN |Lincoln LGS3-250G MIG-MAG Torch
(4 reviews)
€90.20
73,33 € tax excl.
Fast delivery
2-year warranty
Lincoln LGS3 250A torch - EURO connector
Available lengths: 3, 4 and 5 m
- Ergonomic handle for comfortable welding day after day
- Cable articulation via a unique and flexible ball joint for comfortable welding in all positions.
Duty cycle 230 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.2 mm
Supplied with a Ø 1 mm contact tip (M6 thread), a Ø 15 mm conical gas nozzle, and a 1/1.2 liner.
| Combinations | Price | |
| €90.20 | ||
| €106.60 | ||
| €158.67 | ||
Available for order
Lincoln Electric
Reference: W10430-15
LINCOLN |Lincoln LGS3-150G MIG-MAG Torch
(1 review)
€64.58
52,50 € tax excl.
Fast delivery
2-year warranty
Lincoln LGS3 torch 150A - EURO connector
Available length: 3 and 4 m
- Ergonomic handle for comfortable welding day after day
- Swivel handle, easy to handle
- Extra flexible cable
Duty cycle 150 A @ 60%
Applications: Thin sheet metal and automotive
For wire Ø 0.6 to 1 mm
Supplied with a contact tip Ø 0.8 mm (M6 thread) and a conical gas nozzle Ø 12 mm.
| Combinations | Price | |
| €64.58 | ||
| €79.95 | ||
Supplier stock
Lincoln Electric
Reference: LIN-CUT S 1530w
Lincoln - LIN-CUT 1530 w | Plasma cutting table
€40,528.50
32 950,00 € tax excl.
Free delivery
2-year warranty
LIN-CUT 1530W cutting table + Tomahawk 1538 plasma cutter enabling cutting of steel and stainless steel.
Machine frame made of steel incorporating sacrificial flats to support the sheets to be cut, containing water mixed with a specific liquid designed to capture the dust generated during cutting.
Table with a capacity of 400/420L of water and 10L of PLATEGUARD Red corrosion inhibitor, equipped with 5mm thick by 50mm high sheet support flats spaced every 75mm.
The table is fitted with a drain valve for periodic maintenance.
Intuitive interface:
The VMD user interface allows you to control the machine and is installed on an easy-to-use multipoint 16/9 touchscreen.
VMD incorporates all the essential functions for plasma cutting. These include notably:
- User-friendly and intuitive human-machine interface
- Material, thickness and current selection for automatic cycle parameter setting
- Multi-directional JOG functions to move the machine (linear or incremental)
- A sheet alignment function
- Part matrixing function
- A scrap or skeleton cutting function
- Test mode and cut mode
- A large graphical interface to monitor program progress in real time
- Program resume functions in case of incident
- An ignition count counter
- CNC program import via USB.
VMD implements the cutting cycle through advanced functions:
- Arc voltage height regulation
- Cycle with electrical sheet detection
- Automatic consumable wear compensation
- Intelligent sheet detection management
- Speed management via F-code to optimize quality on small internal profiles
- Cut resume functions
VMD also manages:
- 1 laser pointer for positioning assistance and sheet alignment.
- 1 multi-directional torch shock sensor to protect the plasma cutting tool.
Parametric shape:
VMD incorporates a list of 36 parametric shapes most commonly used across various industries.
They allow you to quickly cut one or more parts using the VMD matrixing function.
Integrated VDM NEST module:
The VMD NEST module allows you to automatically convert one or more files (DXF, standard shapes, etc.) and perform simple basic nesting.
Then select the material and thickness, load your sheet and cut.
Integrated LINC-CUT CADCAM software:
The machine comes with a LINC-CUT® CADCAM software suite that will allow you to multiply your creativity. This suite is to be installed on your PC and will allow you to:
- Draw from plans with a complete and powerful industrial drawing module.
- Create text using a multitude of character fonts
- Draw with the help of parametric shapes
- Import standard formats .dxf, .dwg, .pdf and vector
- Vectorize your images
- Nest your parts and generate the tool path (manually, automatically or in full automatic mode).
- Generate machine programs
The LINC-CUT® CADCAM manages up to 4 cut quality levels to adapt the geometry of your part to your application requirements:
- Fast contour cuts with little or no burrs
- Cuts for bolt holes
- Cuts for quality lettering
Lincoln Electric
Reference: S33444
Lincoln - 1 Drive Roll for BESTER 190 C -Multi and 215 MP welder
(2 reviews)
€11.48
9,33 € tax excl.
Fast delivery
2-year warranty
These drive rolls are designed for Lincoln welder models in the BESTER 190C -Multi and 215MP range
4 drive rolls available depending on the Ø and type of wire to be welded:
For solid steel or stainless steel wire Ø 0.6 / 0.8 mm ( Lincoln reference S33444-20 )
For solid steel or stainless steel wire Ø 0.8 / 1 mm ( Lincoln reference S33444-21 )
For solid aluminium wire Ø 0.8/ 1 mm ( Lincoln reference S33444-22 )
For flux-cored wire Ø 0.9 / 1.2 mm ( Lincoln reference S33444-23 )
The drive roll is reversible; with one drive roll you have two possible wire diameters.
| Combinations | Price | |
| €11.48 | ||
| €11.17 | ||
| €12.20 | ||
| €14.35 | ||
Save 5%
Supplier stock
Lincoln Electric
Reference: K14391-1
Lincoln - Plasma Cutter TOMAHAWK 45
€1,748.04
€1,840.04
1 421,20 € tax excl.
or 4 x 437,01 €
Free delivery
2-year warranty
The Tomahawk 45 plasma cutter is light enough to be transported to any job site — simply connect the compressed air and start cutting immediately.
Ideal for maintenance work, small-scale fabrication (e.g. ventilation duct installation), demolition work..
- High performance - Innovative electrode and cutting nozzle design.
- Flexible - a single-phase 230V power supply is sufficient.
- Contact cutting device Reliable plasma arc ignition without high frequency.
- Enhanced safety: The parts-in-place system detects correct installation of torch consumables
- Cutting of various metals – Unalloyed steel, stainless steel, aluminium and others.
Power supply from a generator is possible
Output current range 15 - 45 A
Duty cycle 40A@60% - 45A@145% - 30A@100%
Example of possible cutting thickness for steel:
Recommended cutting thickness: 16 mm
Clean cutting thickness: 20 mm maximum
Severance cutting thickness: 25 mm maximum
Supplied with
One manual torch length 6 m - EURO connector
Cable and ground clamp
Supplier stock
Lincoln Electric
Reference: K870
LINCOLN - Remote control pedal k870 for TIG welder
€530.95
431,67 € tax excl.
or 4 x 132,74 €
Free delivery
2-year warranty
Essential when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 7.6 m cable.
Compatible with the following Lincoln machines:
Invertec 175 TP - 220TPX
Invertec V27 -TP
Inverter 275S
Invertec 300 TPX - 400 TPX
Aspect 200 - aspect 300
Available for order
Lincoln Electric
Reference: W000011139
LINCOLN - Kit 35 C 50 accessories electrode holder + earth clamp Lincoln
(2 reviews)
€179.37
145,83 € tax excl.
or 3 x 59,79 €
Free delivery
2-year warranty
This 35C50 kit includes:
1 SEGURA 300 electrode holder + 35 mm² cable 4 m long
1 Hippo 400 earth clamp + 35 mm² earth cable 4 m long
Conductor diameter 13 mm
Duty cycle 300A@35%
Available for order
Lincoln Electric
Reference: 511819-1
Lincoln - BASO G basic electrodes Ø 2.5 mm pack of 1.4 kg
€36.80
29,92 € tax excl.
Fast delivery
2-year warranty
Lincoln BASO G basic electrodes length 350 mm - Ø 2.5 mm.
Vacuum packed.
Compliant with standards
AWS A5.1 / E7018-1 H4R
ISO 2560-A: E 42 5 B 32 H5
One pack contains approximately 60 electrodes
Supplier stock
Lincoln Electric
Reference: W000278398-2
Lincoln Protig NGS 30 EB C5B-S TIG Torch - 5M
€363.87
295,83 € tax excl.
or 4 x 90,97 €
Free delivery
2-year warranty
NGS 30 EB C5B-S-5M Torch
Length 5 m
Duty cycle: 200 A @35% - 130 A @60%
This torch is supplied with:
1 long cap
1 ceramic nozzle Ø 12 mm
1 tungsten electrode Ø 2.4 mm
Available for order
Lincoln Electric
Reference: WTT2-17B
WELDLINE WTT2-17 button TIG torch
€152.73
124,17 € tax excl.
or 3 x 50,91 €
Free delivery
2-year warranty
The BUTTON TIG WTT2-17-EB-C5B torches offer the best performance for optimised welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites.
High-quality components, a studied and modern design — the guarantee of efficient and comfortable welding for the welder.
The torches are manufactured to high quality standards. Consumables are compatible with international standards.
Duty cycle 135A@35% -100A@60%
Usable electrode diameter: from 1 to 3.2 mm.
Supplied with: one blue lanthanum tungsten electrode Ø 2 mm + ceramic nozzle GR 6 + 1 long cap
| Combinations | Price | |
| €152.73 | ||
| €176.30 | ||
Available for order
Lincoln Electric
Reference: ED016354
Lincoln Innershield NR-211-MP Wire Ø 0.9 mm
(3 reviews)
€177.33
144,17 € tax excl.
or 3 x 59,11 €
Free delivery
2-year warranty
Main Characteristics
- Suitable for outdoor use on site in winds up to 50 km/h
- All-position welding (including downhill) of sheet metal up to 12 mm thickness
- Suitable for thin sheet> 1.2 mm with Ø 0.9 mm
- Excellent choice for welding galvanised steels
Applications
- Metal sheet or thin sheet scrap.
- Galvanised metal scrap
- Robotic/automatic applications
- General fabrication
- Maximum plate thickness: 5/16" for tubes up to 0.045" diameter for 0.045" (1.14 mm)
- Maximum plate thickness: 1/2" (12.7 mm) for tubes from 0.068 to 3/32" diameter.
Welding Positions
All positions
Spool weight: 4.5 kg
Available for order
Lincoln Electric
Reference: W000011138
Electrode holder + earth clamp Lincoln accessory kit - 9 mm connector
(2 reviews)
€103.53
84,17 € tax excl.
Fast delivery
2-year warranty
This kit includes:
1 Caïman 200 electrode holder + 25 mm² cable 3 m long
1 Hippo 200 earth clamp + earth cable 3 m long
Connector diameter 9 mm
Supplier stock
Lincoln Electric
Reference: WTT2-9
TIG Flex-Head Torch Lincoln WTT2-9
(1 review)
€100.45
81,67 € tax excl.
Fast delivery
2-year warranty
The TIG WTT2-9-RL-C5B flex-head torches offer the best performance for optimised welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites. High-quality components and a well-thought-out modern design ensure efficient and comfortable welding for the operator.
The torches are manufactured to high quality standards. Consumables are compatible with international standards.
Duty cycle 110A@35% - 80A@60%
Usable electrode diameter: from 1 to 1.6 mm.
Supplied with: one blue lanthanated tungsten electrode Ø 1.6 mm + ceramic nozzle + 1 long back cap
| Combinations | Price | |
| €100.45 | ||
| €132.84 | ||
Save 15%
Supplier stock
Lincoln Electric
Reference: K12039-1
LINCOLN - Tomahawk 1538 | Invertec plasma cutter
€4,161.23
€4,895.57
3 383,14 € tax excl.
Free delivery
2-year warranty
High-performance plasma cutting.
The Lincoln Electric Tomahawk plasma cutting system focuses on three elements:
- S (Starting) - An innovative and patented arc starting system that preserves and extends electrode service life.
- P (Performance) - Thanks to a very high-speed helical airflow combined with a special electrode and nozzles designed to concentrate the plasma flow.
- L (Lifetime) - The optimized airflow cools the electrode and nozzle for extended service life.
- Performance - Innovative cutting electrode and nozzle design.
- Service life - The innovative design increases consumable service life.
- Flexible - Multiple torch configurations.
- Concentrated plasma flow - Low heat input, less distortion.
- Cutting of different metals – Mild steel, stainless steel, aluminum and others.
Main Specifications
- advanced arc starting technology, without High Frequency (HF)
- innovative electrode and nozzles
- Improved consumable service life
- Reduced heat input, less distortion
- Multiple torch configurations
Clean cut thickness 40 mm.
Severance cut thickness 45 mm.
Included accessories:
Power cable (3 m)
LC 105 manual torch (7.5 m)
Ground cable and clamp set (6 m)
Air connection kit
Torch consumables parts kit
Your compressor must provide an airflow of 180 liters per minute at a pressure of 5 bar for proper operation of this cutter.
Available for order
Lincoln Electric
Reference: W000010167
Lincoln Freezcool Welding Coolant
€151.70
123,33 € tax excl.
or 3 x 50,57 €
Free delivery
2-year warranty
The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.
Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches
Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.
Supplied in a 9.6 L container
Supplier stock
Lincoln Electric
Reference: K14190-1
LINCOLN COOL ARC 24 cooling unit
€1,429.88
1 162,50 € tax excl.
or 4 x 357,47 €
Free delivery
2-year warranty
This cooling unit is intended for use with the Lincoln Aspect 200 AC/DC TIG welder equipped with a water-cooled torch
Supplier stock
Lincoln Electric
Reference: W000278403-2
Lincoln TIG Torch Protig NGS 10W
€389.50
316,67 € tax excl.
or 4 x 97,38 €
Free delivery
2-year warranty
PROTIG NGS 10W C5B-S TIG torch length 8 m
Duty cycle: 220 A @100%.
Water cooling - Minimum water flow: 1 l/min - Water pressure 3.3 Bar - Maximum water inlet temperature 45°C
Gas flow: Min 7 l/min - Max 13 l/min
This torch is supplied with:
1 long cap
1 nozzle Ø 12 mm
1 tungsten electrode Ø 2.4 mm
| Combinations | Price | |
| €389.50 | ||
| €451.00 | ||
Available for order
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Flux
4 flux-cored wire rollers for Lincoln I-POWERTEC Standard or Advanced welding machine
€129.15
105,00 € tax excl.
Free delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For flux-cored wire (gasless)
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
| Combinations | Price | |
| €129.15 | ||
| €129.15 | ||
Available for order
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Aluminium
4 Aluminum wire rollers for Lincoln I-POWERTEC Standard or Advanced welder
€110.70
90,00 € tax excl.
Fast delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid aluminum wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
| Combinations | Price | |
| €110.70 | ||
| €110.70 | ||
| €110.70 | ||
| €110.70 | ||
| €110.70 | ||
Supplier stock
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Acier
4 steel wire drive rolls for Lincoln I-POWERTEC Standard or Advanced welder
(3 reviews)
€110.70
90,00 € tax excl.
Fast delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For solid steel or stainless steel wire
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
| Combinations | Price | |
| €110.70 | ||
| €110.70 | ||
| €110.70 | ||
| €110.70 | ||
| €110.70 | ||
Supplier stock
Lincoln Electric
Reference: WTT2-17RL
WELDLINE WTT2-17 TIG flex head torch
€128.13
104,17 € tax excl.
Free delivery
2-year warranty
The TIG WTT2-17-RL-C5B flex head torches offer the best performance for optimized welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites. High-quality components, a studied and modern design — the guarantee of efficient and comfortable welding for the operator.
The torches are manufactured to high quality standards. Consumables are compatible with the international standard.
Duty cycle 135A@35% - 100A@60%
Usable electrode diameter: 1 to 3.2 mm.
Delivered with: a Ø 2 mm blue lanthanum tungsten electrode + GR 6 ceramic nozzle + 1 long cap
| Combinations | Price | |
| €128.13 | ||
| €188.60 | ||
Available for order
Lincoln Electric
Reference: W10430-36
LINCOLN | Mig-Mag Torch Lincoln LGS3-360G
€147.60
120,00 € tax excl.
Free delivery
2-year warranty
Lincoln LGS3 360G torch - EURO connector.
Available length 3 - 4 and 5 m
- Ergonomic handle for comfortable welding day after day
- Cable articulation via unique and flexible ball joint for comfortable welding in all positions.
Duty cycle 330 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.6 mm
Supplied with a contact tip Ø 1.2 mm (M8 thread) and a conical gas nozzle Ø 16 mm.
| Combinations | Price | |
| €147.60 | ||
| €158.88 | ||
| €183.48 | ||
Available for order
Lincoln Electric
Reference: WP10419
Teflon liner for MIG torch Lincoln LGS 2 aluminium welding
(3 reviews)
€16.81
13,67 € tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner Ø 0.1 mm, 1.2 mm
2 lengths available for 3 or 4 m torch.
This liner fits 250 A torches used with Lincoln Speedtec 200 and 215 C welding machines
| Combinations | Price | |
| €16.81 | ||
| €18.66 | ||
Available for order
Lincoln Electric
Reference: KP10441A
10 Aluminium contact tips for LGS-LGP 250 Lincoln torch
(5 reviews)
€12.92
10,50 € tax excl.
Fast delivery
2-year warranty
10 contact tips for steel or stainless steel welding, designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E
M6 thread, length 28 mm.
3 available diameters: 0.8, 1 and 1.2 mm.
| Combinations | Price | |
| €8.66 | ||
| €12.92 | ||
| €8.92 | ||
Available for order
Lincoln Electric
Reference: W000010790
5 gas nozzles diameter 15 mm Lincoln for torch LGS and LGP
(8 reviews)
€26.24
21,33 € tax excl.
Fast delivery
2-year warranty
5 gas nozzles designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E
Available for order
Lincoln Electric
Reference: LINCOLN-GALET
1 Drive roll for Lincoln Speedtec and Powertec welder
(10 reviews)
€36.90
30,00 € tax excl.
Fast delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
| Combinations | Price | |
| €36.90 | ||
| €36.90 | ||
| €39.98 | ||
| €36.90 | ||
| €31.85 | ||
| €39.98 | ||
Lincoln Electric
Reference: W000267116
DBP | Round acid-resistant brush for stainless steel passivation
(1 review)
€6.92
5,63 € tax excl.
Fast delivery
2-year warranty
This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.
Two diameters available: 6 and 8 mm
| Combinations | Price | |
| €7.85 | ||
| €6.92 | ||
| €11.78 | ||
Lincoln Electric
Reference: 2GAL-Fourré
2 Drive Rolls ring + key for flux-cored wire
€23.06
18,75 € tax excl.
Fast delivery
2-year warranty
The flux-cored wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL WELDING/OTAI
Futura 2005
Futura 2505
for welding wire: Ø 1.2 / 1.6 mm
| Combinations | Price | |
| €23.06 | ||
| €23.78 | ||
Lincoln Electric
Reference: 2GAL-Aluminium
2 Ring drive rolls + key for aluminium wire
(1 review)
€23.06
18,75 € tax excl.
Fast delivery
2-year warranty
The aluminium wire drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL-WELDING (OTAI)
Futura 2005 and 0505C
for welding wire:
Aluminium Ø 0.8 / 1 mm
Aluminium Ø 1.2 / 1.6 mm
| Combinations | Price | |
| €26.54 | ||
| €23.06 | ||
Available for order
Lincoln Electric
Reference: 2GAL-Acier
2 Ring Drive Rolls + Key for Steel Wire
€48.59
39,50 € tax excl.
Fast delivery
2-year warranty
The drive rolls listed below are compatible with the following welding machines:
DECA
D-mig 635T and 635TD - 650 T and 650 TD - 660 T and 660 TD
D-mig 735TD - 650 T - 750 TD - 760 TD
LINCOLN
Quickmig 250 and Quickmig 300
SOL WELDING/OTAI
Futura 2005
Futura 2505
for welding wire:
Steel or stainless steel Ø 0.8 / 1 mm
Steel or stainless steel Ø 0.6 / 0.8 mm
| Combinations | Price | |
| €51.82 | ||
| €48.59 | ||
| €53.91 | ||
Save 5%
Lincoln Electric
Reference: K12048-1
LINCOLN - Tomahawk 1025 | Invertec Plasma Cutter
(1 review)
€3,070.03
€3,231.61
2 495,99 € tax excl.
or 4 x 767,51 €
Free delivery
2-year warranty
High-performance plasma cutting.
The Lincoln Electric Tomahawk plasma cutting system focuses on three elements:
- S (Starting) - An innovative and patented starting system that preserves and extends electrode service life.
- P (Performance) - Thanks to a very high-speed helical airflow combined with a special electrode and nozzles designed to concentrate the plasma flow.
- L (Lifetime) - The optimised airflow cools the electrode and nozzle for extended service life.
- Performance - Innovative electrode and cutting nozzle design.
- Service life - The innovative design increases consumable lifespan.
- Flexible - Numerous torch configurations.
- Concentrated plasma flow - Low heat input, less distortion.
- Cutting of various metals – Unalloyed steel, stainless steel, aluminium and others.
Main Features
- advanced arc starting technology, without High Frequency (HF)
- innovative electrode and nozzles
- Extended consumable lifespan
- Reduced heat input, less distortion
- Numerous torch configurations
Clean cut thickness 25 mm.
Separation cut thickness 30 mm.
Included accessories:
Power cable (3 m)
Manual torch LC 65 (7.5 m)
Cable and ground clamp set (6 m)
Air connection kit
Torch consumable parts kit
Your compressor must have an airflow of 130 litres per minute at a pressure of 5 bar for the proper operation of this cutter.
Supplier stock
Lincoln Electric
Reference: WTT2-26
TIG flex-head torch Lincoln WTT2-26
(2 reviews)
€142.47
115,83 € tax excl.
Free delivery
2-year warranty
The TIG WTT2-26-RL-C5B flex-head torches offer the best performance for optimised welder comfort.
Designed to meet the challenges of a variety of applications on maintenance, manufacturing or construction sites. High-quality components, a thoughtful and modern design ensure efficient and comfortable welding for the operator.
The torches are manufactured to high quality standards. Consumables are compatible with the international standard.
Duty cycle 180A@35% - 130A@60%
Usable electrode diameter: 1 to 4 mm.
Supplied with: one blue lanthanum tungsten electrode Ø 2.4 mm + GR 8 ceramic nozzle + 1 long back cap
| Combinations | Price | |
| €142.47 | ||
| €230.63 | ||
Available for order
Lincoln Electric
Reference: R-1019-125-1/08R
Adapter for Ø 200 spool Lincoln
(3 reviews)
€27.37
22,25 € tax excl.
Fast delivery
2-year warranty
This adapter allows the use of Ø200 wire spools on welding machines originally designed to accommodate 15 kg spools.
Available for order
Lincoln Electric
Reference: KP10441
10 Lincoln contact tips for LGS-LGP 250 torch
(17 reviews)
€9.32
7,58 € tax excl.
Fast delivery
2-year warranty
10 contact tips for steel or stainless steel welding designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E
M6 thread Length 28 mm.
3 diameters available: 0.8 - 1 and 1.2 mm.
| Combinations | Price | |
| €9.32 | ||
| €6.86 | ||
| €12.09 | ||
| €7.85 | ||
Save 20%
Available for order
Lincoln Electric
Reference: K12038-3
LINCOLN TOMAHAWK 30K | - Plasma Cutter with integrated compressor
(2 reviews)
€1,840.01
€2,300.01
1 495,97 € tax excl.
or 4 x 460,00 €
Free delivery
2-year warranty
The Tomahawk 30 K plasma cutter is the most flexible plasma cutting machine on the market. The machines are delivered ready to use, capable of cutting quickly and precisely.
Powered by single-phase 230V, ideal for on-site work. With this cutter, plasma cutting will no longer be a problem — forget grinding, simply take the torch and cut in just a few seconds.
- High performance - Innovative electrode and cutting nozzle design.
- Flexible - a single-phase 230V power supply is sufficient.
- Robust - long-life integrated compressor or external compressed air supply.
- Portable 18.5 kg only, small and compact.
- Cutting of various metals – Unalloyed steel, stainless steel, aluminum and others.
Output current range 15 - 30 A
Duty cycle 30A@60% - 25A@100%
Example of possible cutting thickness for steel:
Recommended cutting thickness: 12 mm
Clean cutting thickness: 16 mm maximum
Separation cutting thickness: 20 mm maximum
thanks to a button on the front of the unit, it can be connected to a compressor.
Delivered with
One LC 30 manual torch, length 4 m - EURO connector
Cable and ground clamp
Save 10%
Supplier stock
Lincoln Electric
Reference: K14099-1
LINCOLN - Inverter Multi-Process Welder SPEEDTEC 200C Without Torch K14099
(25 reviews)
€1,634.87
€1,816.53
1 329,17 € tax excl.
or 4 x 408,72 €
Free delivery
2-year warranty
This Lincoln Speedtec 200C Inverter Synergic technology unit allows you to weld using 3 processes: MMA, MIG-MAG and TIG
It allows welding with rutile and basic electrodes (stainless steel – cast iron, etc.) of Ø 1.6 to 4 mm (electrode holder not included)
It is also possible to add a TIG welding torch as an option. In TIG mode, this unit cannot weld aluminium.
It operates on a standard 16 A – 230 V household outlet.
Its adjustment range is 20 to 200 A in MIG-MAG mode and 20 to 160 A in MMA or TIG mode
Easy polarity reversal to use flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.
It features the following devices:
PFC (power factor corrector) It can be used with a 100 m extension cord without any loss of power.
The power supply can be provided from a generator.
HOT START adjustable, reduces the risk of sticking when the electrode and workpiece are cold, also facilitates arc striking and penetration.
ARC FORCE adjustable, maintaining constant amperage regardless of arc length.
ANTI-STICKING reduces the risk of the electrode sticking to the workpiece.
Its advantages:
The high duty cycle of this unit guarantees operation without premature triggering of the thermal protection system.
This unit is delivered with the sale with:
1 x 2 m power cable
1 x 2 m gas hose
1 x 3 m ground cable
1 set of Ø 0.8 and 1 mm drive rollers for steel welding wire
Available for order
Lincoln Electric
Reference: w100000333
Lincoln - 2 diffusers for plasma cutter torch LC 45
€94.00
76,42 € tax excl.
Fast delivery
2-year warranty
2 diffusers for Lincoln plasma cutter torch model LC 45, compatible with the original torch supplied with the Tomawak 45
Available for order
Lincoln Electric
Reference: W100000340
Lincoln - 1 protection nozzle for LC-45 plasma cutter torch
€88.15
71,67 € tax excl.
Fast delivery
2-year warranty
1 protection cup for LC-45 torch for the Lincoln Tomahawk 45 plasma cutter
Lincoln Electric
Reference: W100000330
Lincoln - 3 protection pads for plasma cutter torch LC-45
€62.32
50,67 € tax excl.
Fast delivery
2-year warranty
3 protection shields 45 A for LC-45 torch, original supply for the Lincoln Tomahawk 45 plasma cutter
Available for order
Lincoln Electric
Reference: W100000329
Lincoln - 5 nozzles for plasma cutter torch LC-45
€50.12
40,75 € tax excl.
Fast delivery
2-year warranty
5 nozzles 45 A for Lincoln plasma cutter torch, original supply with the Tomawak 45
Available for order
Lincoln Electric
Reference: W100000328
Lincoln - 5 Electrodes for LC-45 plasma cutter torch
€70.73
57,50 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for Lincoln plasma cutter torch LC-45, compatible with the original torch supplied with the Tomawak 45
Supplier stock
Lincoln Electric
Reference: W100000362
Lincoln - Consumable kit for LC 45 manual plasma torch
€230.63
187,50 € tax excl.
or 3 x 76,88 €
Free delivery
2-year warranty
Kit compatible with the plasma torch fitted on the Lincoln Tomahawk 45 plasma cutter
It contains:
5 electrodes
1 gas diffuser
5 Nozzles 45 A
1 Nozzle shield
1 Shield cup
Available for order
Lincoln Electric
Reference: W0300699A
Lincoln - Compass Kit for Plasma Torch
€128.13
104,17 € tax excl.
Free delivery
2-year warranty
This compass kit for single-phase plasma torch is designed for use with Lincoln plasma cutters fitted with a manual LC 25-65 and 105 type torch
This kit includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut a circle with a maximum diameter of 82 cm.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.- "Centre punch" centring guide for precise centring without perforating the sheet metal.
Available for order
Lincoln Electric
Reference: W100000326
Lincoln - 5 nozzles for Tomahawk 30K plasma cutter torch
€25.12
20,42 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln Tomahawk 30K plasma cutter torch
Nozzle suitable for the Lincoln LC 30 torch model
Available for order
Lincoln Electric
Reference: W100000361
Lincoln - Consumable kit for LC 30 manual Plasma torch
€199.88
162,50 € tax excl.
or 3 x 66,63 €
Free delivery
2-year warranty
Kit adapted to the plasma torch on the Lincoln Tomahawk 30 K plasma cutter with integrated compressor
It contains:
10 electrodes
3 gas diffusers
10 Nozzles 30 A
1 Gas nozzle
1 Pad
Supplier stock
Lincoln Electric
Reference: KP3046
Lincoln magnifying lens
(5 reviews)
€6.05
4,92 € tax excl.
Fast delivery
2-year warranty
These magnifying lenses can be used with the following masks:
Eurowave 3.0 LS
Viking 2450
Viking 3350
Viking FGS
EUROPURE 5500 LS
| Combinations | Price | |
| €6.05 | ||
| €5.13 | ||
| €6.05 | ||
| €6.05 | ||
| €5.13 | ||
| €5.13 | ||
| €6.05 | ||
Available for order
Lincoln Electric
Reference: W03X0893-25A
Lincoln - 5 Electrodes for manual LC 65 plasma cutter torch
€39.46
32,08 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for Lincoln LC 65 plasma torch.
Suitable for the Tomahawk 1025 plasma cutter model
Supplier stock
Lincoln Electric
Reference: W03X0893-119A
Lincoln - Plasma torch cutting / chamfering / guidance kit
(1 review)
€507.38
412,50 € tax excl.
or 4 x 126,85 €
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making very precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation locking).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches LC65 - LC105
- Premium quality.
Available for order
Lincoln Electric
Reference: W000261984
10 internal lenses 117 x 51 mm for Lincoln CHAMELEON welding helmet
€25.12
20,42 € tax excl.
Fast delivery
2-year warranty
10 inner replacement lenses 117 x 51 mm for EUROLUX welding helmet
Thickness 1 mm
Available for order
Lincoln Electric
Reference: W000261994
10 internal lenses 116 x 62 mm for Lincoln EUROLUX welding helmet
€28.65
23,29 € tax excl.
Fast delivery
2-year warranty
10 internal replacement lenses 116 x 62 mm for EUROLUX welding helmet
Thickness 1 mm
Available for order
Lincoln Electric
Reference: W03X0893
Lincoln - 5 cutting nozzles for LC 105 manual plasma cutter torch
(1 review)
€34.34
27,92 € tax excl.
Fast delivery
2-year warranty
5 cutting nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
4 amperage options available depending on your needs: 40 - 60 - 80 - 100 A
| Combinations | Price | |
| €34.34 | ||
| €34.34 | ||
| €34.34 | ||
| €37.92 | ||
Available for order
Lincoln Electric
Reference: W03X0893-67A
Lincoln - 2 protection skids for manual plasma cutter torch LC 105
€55.87
45,42 € tax excl.
Fast delivery
2-year warranty
2 protection skids for Lincoln Tomahawk 1538 plasma cutter torch
Suitable for Lincoln LC 105 manual torch
| Combinations | Price | |
| €55.87 | ||
| €45.72 | ||
| €53.81 | ||
Available for order
Lincoln Electric
Reference: W03X0893-66A
Lincoln - 1 gouging nozzle for plasma cutter torch LC 105 manual or
(2 reviews)
€78.79
64,06 € tax excl.
Fast delivery
2-year warranty
1 gouging nozzle for Lincoln LC 105 plasma torch, manual or automatic
Compatible with the Tomahawk 1538 plasma cutter
Available for order
Lincoln Electric
Reference: W03X0893-58A
Lincoln - 5 Extended nozzles for LC 105 manual plasma cutter torch
(2 reviews)
€45.72
37,17 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
| Combinations | Price | |
| €45.72 | ||
| €53.36 | ||
| €48.89 | ||
| €49.20 | ||
Available for order
Lincoln Electric
Reference: W03X0893-65A
Lincoln - 5 gouging nozzles for LC 105 manual plasma cutter torch
€34.85
28,33 € tax excl.
Fast delivery
2-year warranty
5 gouging nozzles for Lincoln LC 105 manual plasma torch
Compatible with the Tomahawk 1538 plasma cutter
Available for order
Lincoln Electric
Reference: W03X0893-70R
Lincoln - 2 diffusers for plasma cutter torch LC 105 manual
€61.50
50,00 € tax excl.
Fast delivery
2-year warranty
2 diffusers for Lincoln plasma cutter torch model LC 105 manual
Suitable for Lincoln Tomahawk 1538 model LC 105 manual
Available for order
Lincoln Electric
Reference: W03X0893-60A
Lincoln - 5 Electrodes for manual plasma cutter torch LC 105
(2 reviews)
€54.33
44,17 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for plasma torch Lincoln LC 105 Tomahawk 1538
Suitable for the Lincoln LC 105 Tomahawk 1538 plasma cutter
| Combinations | Price | |
| €54.33 | ||
| €68.17 | ||
Available for order
Lincoln Electric
Reference: W8800117R
Cartridge for special plasma impurity filter
(2 reviews)
€173.74
141,25 € tax excl.
or 3 x 57,91 €
Free delivery
2-year warranty
Replacement cartridge to be inserted in the Gys filter reference 039728 or the Lincoln filter reference LAF1250.
Available for order
Lincoln Electric
Reference: W88X1456A-LAF1250
Special impurity filter for plasma cutter
(6 reviews)
€148.62
120,83 € tax excl.
Free delivery
2-year warranty
This filter protects your torch and consumables from small particles carried by air that interfere with its proper operation.
It comes with a filter cartridge (reference W8800117R)
Lincoln reference: W88X1456A
Supplier stock
Lincoln Electric
Reference: W03X0893-115A
Lincoln - Consumable kit for LC 105 manual Plasma cutter torch
€602.70
490,00 € tax excl.
or 4 x 150,68 €
Free delivery
2-year warranty
This kit for Lincoln LC 105 manual torch
It contains:
- 1 nozzle
- 1 gouging nozzle
- 2 diffusers
- 5 nozzles 60 A
- 15 nozzles 100A
- 5 gouging nozzles
- 3 extended nozzles 100 A
- 20 electrodes
- 3 extended electrodes
- 1 standoff guide
- 1 nozzle shield
- 1 nozzle shield for gouging
- 1 extended nozzle shield
- 2 O-rings
1 silicone lubricant for O-ring
Kit adapted to the plasma torch on the cutter
Lincoln Tomahawk 1538
Saf Prestojet 100
Available for order
Lincoln Electric
Reference: W03X0893-113A
Lincoln - Consumable kit for LC 65 manual plasma cutter torch
(1 review)
€538.13
437,50 € tax excl.
or 4 x 134,53 €
Free delivery
2-year warranty
This kit for the Lincoln LC 65 manual torch
It contains:
- 1 nozzle
1 gouging nozzle
- 2 diffusers
- 10 nozzles 60 A
- 5 shielded nozzles 60A
- 3 gouging nozzles
- 3 extended nozzles 60 A
- 25 electrodes
- 3 extended electrodes
- 1 standoff guide
- 1 nozzle shield
- 1 nozzle shield for gouging
- 1 extended nozzle shield
- 2 O-rings
1 silicone lubricant for O-ring
Kit adapted to the plasma torch on the Lincoln Tomahawk 1025 cutter
Available for order
Lincoln Electric
Reference: W03X0893-50R
Lincoln - 3 diffusers for Tomahawk 1025 plasma cutter torch
€70.73
57,50 € tax excl.
Fast delivery
2-year warranty
3 diffusers for Lincoln Tomahawk 1025 plasma cutter torch
Suitable for Lincoln torches
Models:
LC 65-80/100
LC 65-80/100M
Available for order
Lincoln Electric
Reference: W03X0893-41A
Lincoln - 1 shield cup for Tomahawk 1025 plasma cutter torch
€57.10
46,42 € tax excl.
Fast delivery
2-year warranty
1 shield cup for Lincoln Tomahawk 1025 plasma cutter torch
Compatible with Lincoln LC 65 and 65 M torch
Available for order
Lincoln Electric
Reference: 1025
Lincoln - 5 nozzles for plasma cutter torch Tomahawk 1025
€36.90
30,00 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln Tomahawk 1025 plasma cutter torch
Suitable for Lincoln torches model LC 65 and LC 65M
3 references available:
Welding intensity: 40A - 50A - 60A
| Combinations | Price | |
| €39.98 | ||
| €39.98 | ||
| €36.90 | ||
Supplier stock
Lincoln Electric
Reference: W03X0893-118A
Lincoln - Consumable kit for plasma cutter torch LC 25
(1 review)
€199.88
162,50 € tax excl.
or 3 x 66,63 €
Free delivery
2-year warranty
This kit is for the Lincoln LC 25 torch.
It contains:
- 1 nozzle
- 3 diffusers
- 10 tips 25 A
- 10 electrodes
- 3 cutting guides
This kit is suitable for the torch on the Lincoln PC 208 and PC 210 plasma cutters
Available for order
Lincoln Electric
Reference: W03X0893-14R
Lincoln - 2 cutting guides for plasma cutter torch LC 40/60/65/80/100
€50.22
40,83 € tax excl.
Fast delivery
2-year warranty
Cutting guide for plasma cutter torch LC 40/60/65/80/100/105 compatible with Lincoln plasma cutters:
Tomahawk 1025
Available for order
Lincoln Electric
Reference: W03X0893-78R
Lincoln - 1 cutting guide for plasma cutter torch LC 25 or LC30
€21.01
17,08 € tax excl.
Fast delivery
2-year warranty
Cutting guide for plasma cutter torches on the Lincoln Invertec PC 210 and Tomahawk 30K plasma cutters
This cutting guide is designed for torch models LC25 and LC30
Available for order
Lincoln Electric
Reference: W03X0893-77A
Lincoln - 1 shield cup for plasma cutter torch PC 210 or Tomahawk
€32.29
26,25 € tax excl.
Fast delivery
2-year warranty
1 shield cup for Lincoln PC 210 and Tomahawk 30K plasma cutter torch
This nozzle is suitable for Lincoln LC 25 and LC30 torches
Available for order
Lincoln Electric
Reference: W03X0893-76A
Lincoln - 5 nozzles for plasma cutter torch PC 210 or PC 208
€18.35
14,92 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln PC 210 and PC 208 plasma cutter torch
Compatible with Lincoln LC 25 model torches
Available for order
Lincoln Electric
Reference: W03X0893-75A
Lincoln - 5 Electrodes for plasma cutter torch PC 210 or PC 208-Tomahawk
€20.39
16,58 € tax excl.
Fast delivery
2-year warranty
5 medium electrodes for Lincoln PC 210 and PC 208 or Tomahawk 30K plasma cutter torch
These electrodes are suitable for Lincoln LC 25 and LC30 torch models
Available for order
Lincoln Electric
Reference: W03X0893-5R
Lincoln - 3 diffusers for plasma cutter torch PC 208-PC210 or Tomahawk 3
€50.74
41,25 € tax excl.
Fast delivery
2-year warranty
3 diffusers for Lincoln plasma cutter torch PC 210 - PC 208 and Tomahawk 30K
This diffuser is suitable for Lincoln torches model LC 25 and LC30
Save 30%
Available for order
Lincoln Electric
Reference: B18264-1
LINCOLN - BESTERMIG 200-S| Multi-process inverter welder
€691.88
€988.40
562,51 € tax excl.
or 4 x 172,97 €
Free delivery
2-year warranty
This BesterMIG 200-S Multi multi-process machine allows MMA - MIG-MAG - TIG welding
Its digital display makes it easy to read the setting information
It accepts wire spools of diameter 100 and 200 mm.
Its low weight makes it an easy ally when transporting on site. It can also be powered by a generator.
No longer worry about choosing the welding current, wire speed or material thickness. The Synergic system does it for you while guaranteeing perfect welds.
The Synergic system limits the risk of weld defects and ensures excellent quality at reduced costs.
Weld with complete peace of mind: automatic parameter adjustment saves welding time and increases your productivity
Easy polarity change for welding with flux-cored wire (gasless).
It features the following functions:
Arc-Force
Hot-Start
Anti-Stick
It is supplied with:
1 MIG-MAG torch length 3 m equipped with a contact tip for steel or stainless steel wire Ø 0.8 mm.
1 Earth clamp + Cable cross-section 16 mm² length 3 m
1 Electrode holder + cable length 3 m
1 Power supply cable length 3 m
1 Reversible drive roll for steel or stainless steel wire Ø 0.8 / 1 mm fitted on the machine
1 Reversible drive roll for steel or stainless steel wire Ø 0.6 / 8 mm
1 Shielding gas hose for refillable cylinder length 2 m
Save 20%
Available for order
Lincoln Electric
Reference: K14439-1
Lincoln - Sprinter 180 T
€712.38
€890.47
579,17 € tax excl.
or 4 x 178,10 €
Free delivery
2-year warranty
The Sprinter T is a compact and lightweight welding machine (under 9 kg) delivering 200 A for all electrode types up to 4 mm. Versatile, it offers MMA, HF TIG and pulsed TIG welding, with dual voltage 120/230 V and an intuitive interface, ideal for any maintenance, fabrication or light construction project
Save 10%
Supplier stock
Lincoln Electric
Reference: W000278397-2
PROTIG 20 NG S Torch - 8 M
€388.48
€431.64
315,84 € tax excl.
or 4 x 97,12 €
Free delivery
2-year warranty
PROTIG 20 NG S Torch - 8 M
Save 20%
Available for order
Lincoln Electric
Reference: K14440-1
Lincoln - Sprinter 200 T
€814.88
€1,018.60
662,50 € tax excl.
or 4 x 203,72 €
Free delivery
2-year warranty
Sprinter 200 T
Supplier stock
Lincoln Electric
Reference: B18266-1
LINCOLN - BESTERMIG 215-S| Multiprocess inverter welding unit
(1 review)
€993.23
807,50 € tax excl.
or 4 x 248,31 €
Free delivery
2-year warranty
This BesterMIG 215-S Multi multiprocess unit allows MMA - MIG-MAG - TIG welding
Its digital display makes it easy to read the adjustment information
It accepts wire spools of diameter 100 and 200 mm.
Its low weight makes it an easy ally when transporting to a worksite. It can also be powered electrically by a generator.
No longer worry about choosing the welding current, wire speed or material thickness. The Synergic system does it for you while guaranteeing perfect welds.
The Synergic system limits the risk of welding defects and ensures excellent quality at reduced costs.
Weld with complete peace of mind: automatic parameter adjustment saves welding time and increases your productivity
Easy polarity change for welding with flux-cored wire (gasless).
It features the following functions:
Arc-Force
Hot-Start
Anti-Stick
It is delivered with:
1 MIG-MAG torch 4 m length fitted with a contact tip for steel or stainless wire Ø 0.8 mm.
1 Earth clamp + Cable section 16 mm² length 3 m
1 Electrode holder + cable length 3 m
1 Power supply cable length 3 m
1 Reversible roller for steel or stainless wire Ø 0.8 / 1 mm mounted on the unit
1 welding gas hose for refillable cylinder length 2 m
Save 10%
Available for order
Lincoln Electric
Reference: B18268-1P
LINCOLN - PACK 1 Bester S211 inverter welding machine
€479.70
€533.00
390,00 € tax excl.
or 4 x 119,93 €
Free delivery
2-year warranty
Bester S211 generator
Shoulder strap
Sturdy and lightweight case
Wire brush
Chipping hammer
3m cable with electrode holder clamp (16 mm²)
Ground clamp with 3 m cable (16 mm²)
Supplier stock
Lincoln Electric
Reference: W100000335
Lincoln - Flush cut kit
€199.88
162,50 € tax excl.
or 3 x 66,63 €
Free delivery
2-year warranty
Save 10%
Supplier stock
Lincoln Electric
Reference: B18267-1P
LINCOLN - PACK Bester S171 inverter welding machine
€404.87
€449.86
329,17 € tax excl.
or 4 x 101,22 €
Free delivery
2-year warranty
Bester S171 inverter
Shoulder strap
Sturdy and lightweight carry case
Wire brush
Chipping hammer
3m cable with electrode holder (16 mm²)
Ground clamp with 3 m cable (16 mm²)
Available for order
Lincoln Electric
Reference: 3100740
LINCOLN | EUROSAF GAS ECO regulator
€276.75
225,00 € tax excl.
or 3 x 92,25 €
Free delivery
2-year warranty
EUROSAF GAS ECO is a dual-stage regulator with shielding gas saver
From the very first second of use, the regulator will deliver the requested flow rate with no water hammer effect. It reduces the total welding cost by cutting gas consumption by up to 50% on TIG and MIG/MAG applications
Advantages of this regulator compared to other models
- Up to 50% savings on shielding gas
- Forged brass body and cover for maximum durability
- Polycarbonate column flowmeter for 360° reading
- Flow stability and accuracy
- Good welding quality with reduced porosity
Specifications
Flow range: 0-30 l/min
• Dual-stage flowmeter
• Filter at inlet to prevent any contamination
• Available in lockable version
• Outlet Ø 6.3 mm
• Maximum inlet pressure of 300 bar
Supplier stock
Lincoln Electric
Reference: W100000331
Lincoln - 5 gouging nozzles 45A plasma LC-45
€68.47
55,67 € tax excl.
Fast delivery
2-year warranty
Lincoln - 5 gouging shield cups 45A plasma LC-45
Save 20%
Lincoln Electric
Reference: K14296-1
LINCOLN - Wheel kit for OUTBACK 200
€294.38
€367.98
239,34 € tax excl.
or 3 x 98,13 €
Free delivery
2-year warranty
This kit includes a handle set, a wheel set and all accessories needed to attach to the Outback 200 welding generator.
Save 10%
Supplier stock
Lincoln Electric
Reference: K14436-1
LINCOLN - SPRINTER 160-S|MMA welding machine
€552.48
€613.87
449,17 € tax excl.
or 4 x 138,12 €
Free delivery
2-year warranty
Key features of the Lincoln Sprinter 160-S:
Ideal for intensive work
High duty cycle at 160 A – 45% at 40°C
Welds rutile, basic and cellulosic electrodes from 1.6 to 4.0 mm in diameter
Open circuit voltage of 95V!
Multi-process: MMA and TIG Lift welding
Technologies: PFC, Soft Arc, Hot Start, Arc Force
Weight: 8.4 kg - Dimensions 162x305x438mm
3-year warranty
Supplied without accessories
Supplier stock
Lincoln Electric
Reference: W100000332
Lincoln - 3 plasma gouging shield cups 45A LC-45
€60.48
49,17 € tax excl.
Fast delivery
2-year warranty
Lincoln - 3 plasma gouging shield cups 45A LC-45
Supplier stock
Lincoln Electric
Reference: WP403676-13
headband for lincoln europure 5500 welding helmet
€34.34
27,92 € tax excl.
Fast delivery
2-year warranty
headband for lincoln europure 5500 welding helmet reference WP403676-13
Available for order
Lincoln Electric
Reference: K14437-1
LINCOLN - SPRINTER 180-S|MMA Welding Machine
€665.22
540,83 € tax excl.
or 4 x 166,31 €
Free delivery
2-year warranty
The advantages of the Lincoln Sprinter 180-S:
Even more powerful. Ideal for intensive work
High duty cycle at 180 A – 35% at 40°C
Welds rutile, basic and cellulosic electrodes from 1.6 to 4.0 mm diameter
Open circuit voltage of 95V!
Multi-process: MMA welding and Lift TIG
Technologies: PFC, Soft Arc, Hot Start, Arc Force
Weight: 8.4kg - Dimensions 162x305x438mm
3-year warranty
Delivered without accessories
Supplier stock
Lincoln Electric
Reference: K14436-1-P
LINCOLN - PACK SPRINTER 160-S|MMA welding machine
€977.85
795,00 € tax excl.
or 4 x 244,46 €
Free delivery
2-year warranty
Included: Generator + Shoulder strap + Case + 14 OMNIA 46 electrodes 2.5mm + Welding gloves + 3 m electrode holder (25mm²) + Earth clamp with 3 m cable (25mm²). Stick welding generator. Easy to transport.
Supplier stock
Lincoln Electric
Reference: K14437-1-P
LINCOLN - PACK SPRINTER 180-S|MMA Welding Machine
€1,100.85
895,00 € tax excl.
or 4 x 275,21 €
Free delivery
2-year warranty
Included: Generator + Shoulder strap + Case + 14 OMNIA 46 electrodes 2.5mm + Welding gloves + 3 m electrode holder (25mm²) + Earth clamp with 3 m cable (25mm²). Stick welding generator. Easy to transport.
Available for order
Lincoln Electric
Reference: K3540-3-CE
VIKING FGS 3250D K3540-3-CE Welding Helmet
(3 reviews)
€378.23
307,50 € tax excl.
or 4 x 94,56 €
Free delivery
2-year warranty
This auto-darkening welding helmet features 4 sensors with an integrated grinding screen with anti-fog coating
Operates with 2 CR 2450 lithium batteries. Equipped with a diode indicating the battery level.
Vision area: 75 x 108 mm.
Light/dark switching time: 0.000004 ms
Dark/light switching time: 10 positions from 0.1 to 1 second.
Sensitivity adjustment via digital button: 10 positions.
Adjustable shade from 9 to 13 for welding, from 5 to 8 for cutting.
Suitable for low-amperage TIG welding, microplasma, and oxy-acetylene welding
Lincoln Electric's exclusive 4C technology liquid crystal display (LCD) increases the spectrum of visible colors. Unlike the traditional auto-darkening filter, 4C® technology broadens the range of visible colors and shades whether the light is diffuse or dark. It eliminates imperfections and color saturation, allowing you to clearly see the material being welded, the arc and the weld pool, while reducing eye fatigue.
3-year warranty.
Optical class 1/1/1/1
Weight 793 g
Supplied with:
5 outer protective lenses
2 inner protective lenses
1 sweatband
1 helmet cover
1 bandana
Supplier stock
Lincoln Electric
Reference: K14379-1
LINCOLN - Quickmig 250 without torch | MIG multi-process unit
(1 review)
€1,819.38
1 479,17 € tax excl.
or 4 x 454,85 €
Free delivery
2-year warranty
This is the latest generation of welding unit manufactured by Lincoln, designed to replace transformer-based units which will be banned from production as of December 31, 2022, as they consume too much energy.
This unit supports the following welding processes:
- MIG-MAG
- Flux-cored wire with and without gas
- Coated electrodes
Synergic welding unit (easy to use) featuring 24 integrated programs
Products in the QUICKMIG range are easy to use and set up.
They allow welding of light structures and small dimensions such as small agricultural equipment.
The range includes generators delivering 250A and 300A, equipped with large LED displays and a user-friendly interface.
As standard, the QUICKMIG offers an efficient 4-roll wire feed system regardless of material type, a connector suitable for a MIG torch, wheels and a gas cylinder support at the rear of the trolley
The Quikmig 250 is a three-phase powered unit (400V - 3pH - 50/60Hz) with a duty cycle of 230A@60% - 250A@35% - 175A@100%.
Included equipment
• Power cable (3 m) without plug
• Ground cable (3 m)
• Gas hose (2 m)
• Drive rollers for solid wire 0.8 and 1.0
• User manual on USB key
Optional:
- MIG-MAG torch not included.
Available on the website and compatible with this unit model and power: Weldline LGS2 -250
- Adapter for 200 mm spool reference R-1019-125-1/08R available for sale on our website
- Electrode holder for stick welding
Save 20%
Supplier stock
Lincoln Electric
Reference: K14380-1
LINCOLN - MIG multi-process welder Quickmig 300 without torch
(3 reviews)
€1,798.88
€2,248.60
1 462,50 € tax excl.
or 4 x 449,72 €
Free delivery
2-year warranty
This is the latest generation of welding unit produced by Lincoln, designed to replace transformer-based units which will be banned from manufacture as of 31 December 2022 due to their excessive energy consumption.
This is a welding unit allowing:
- MIG-MAG
- Flux-cored wire with and without gas
- Coated electrodes
Synergic unit (easy to use) with 24 integrated programs
Products in the QUICKMIG range are easy to use and set up.
They enable welding of light structures and small-scale assemblies such as small agricultural equipment.
The range includes generators delivering 250A and 300A, equipped with large LED screens and a user-friendly interface.
As standard, the QUICKMIG features an efficient 4-roller wire feed system regardless of material type, a connector suitable for a MIG torch, wheels and a gas cylinder support at the rear of the trolley.
The Quikmig 300 is a three-phase powered unit (400V -3pH -50/60Hz) with a duty cycle of 230A@60% - 300A@35% - 175A@100%.
Included equipment
• Power cable (3 m) without plug
• Ground cable (3 m)
• Gas hose (2 m)
• Drive rollers for 0.8 and 1.0 solid wire
• User manual on USB key
Options:
- MIG-MAG torch not included.
Available on the site and compatible with this unit model and power: Weldline LGS2 -250
- Adapter for 200 mm spool reference R-1019-125-1/08R available for purchase on our site
- Electrode holder for stick welding
Save 30%
Supplier stock
Lincoln Electric
Reference: W403677
Lincoln Electric - Ventilated Welding Helmet Wave 3.0 LS
€678.04
€968.63
551,25 € tax excl.
or 4 x 169,51 €
Free delivery
2-year warranty
Supplier stock
Lincoln Electric
Reference: POWERTEC - i250C
LINCOLN - POWERTEC I250C | Inverter welder - Multi-process welder
€5,873.25
4 775,00 € tax excl.
Free delivery
2-year warranty
The Lincoln POWERTEC® i units are new compact inverter-type generators for MIG-MAG & MMA welding. They are available in two power ratings (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user.
Two models are presented:
Powertec i250A standard (STD) Manual adjustment of welding parameters
Manual adjustment of voltage and wire feed speed
Quick button for selection of welding process and shielding gas
Quick access to the most commonly used welding parameters (inductance, 2/4 stroke, Run-in, Burn-back)
Powertec i250 synergic (ADV)
Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding faults...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' colour screen
USB connectivity: Software updates and diagnostics made easier with built-in monitoring functions.
These units feature:
INNOVATIVE INTUITIVE INTERFACE
Easy navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and the thickness to weld V Display of useful information V Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready for use with the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier with built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rollers: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC START Instant and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during changes in welding conditions.
READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new tolerated limits.
Supplied with
Ground clamp and cable length 3 m.
Gas hose length 2 m
Reversible roller for steel/stainless wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m
| Combinations | Price | |
| €5,873.25 | ||
| €6,780.38 | ||
Supplier stock
Lincoln Electric
Reference: K14189-1
LINCOLN - TIG HF Invertec AC/DC ASPECT 200 K14189-1| Welding Unit Without Accessories
€4,592.17
3 733,50 € tax excl.
Free delivery
2-year warranty
The ASPECT® 200 AC/DC is equipped with advanced TIG AC/DC functions (4 waveforms, a pulsed mode, adjustable balance and offset), making it ideal for the most demanding TIG AC or DC welding applications.
It allows welding of materials up to 6 mm thick.
It offers a simple control panel with a bright digital display for easy visualisation and control of welding parameters.
2T and 4T mode selection
Innovative adjustment system via button control from the TIG torch.
Option to adjust via foot pedal or remote control
Spot mode.
Memory mode for saving your settings
Waveform selection.
Excellent electric arc performance = » Excellent ignition, fast and stable, minimum current 2A
Device "1 Phase Buck-boost Circuit" = » Low power consumption
» Bright digital display = Easy adjustment of all parameters
» Cooling unit and transport trolley = Easy transport on site » High robustness
» Encapsulated printed circuit board and "TRUE HD" manufacturing = High robustness
» Generator compatible = Ideal for outdoor job sites
» Advanced TIG AC/DC functions = 4 welding waveforms, Pulsed mode, adjustable Balance and Offset, simple control panel, self-adjustable AC current
To be used optimally and at its maximum capacity (200A) under intensive use, this unit must be paired with a cooling unit and a water-cooled torch.
The TIG setup can be converted to a water-cooled torch setup simply by adding a COOL ARC® 24 cooling unit.
In MMA mode, this unit features the following technologies:
Hot Start: Facilitates and speeds up arc ignition by providing a current surge to prevent electrode sticking.
Anti-sticking: Automatically reduces the output current in the event of a stuck electrode.
Arc Force: Temporary increase in welding current when the arc is too short.
Supplier stock
Lincoln Electric
Reference: POWERTEC i320
LINCOLN - POWERTEC I320C | Standard or advanced multi-process inverter machine with
€3,659.25
2 975,00 € tax excl.
or 4 x 914,81 €
Free delivery
2-year warranty
The POWERTEC® Lincoln i are new compact inverter-type power sources designed for MIG-MAG & MMA welding. They are available in two power ratings (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user.
Two models are presented:
Powertec i320 standard (STD) Manual adjustment of welding parameters
Manual adjustment of voltage and wire feed speed
Quick button for welding process and shielding gas selection
Quick access to the most commonly used welding parameters (inductance, 2/4 stroke, Run-in, Burn-back)
Powertec i320 synergic (ADV)
Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding faults...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' colour screen
USB connectivity: Simplified software updates and diagnostics thanks to built-in monitoring functions.
This machine features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and thickness to be welded V Display of useful information V Multilingual navigation menu
MORE FEATURES
AUTO START-UP The machine is immediately ready for use thanks to the best settings already included
USB CONNECTIVITY Simplified software updates and diagnostics thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
IGNITION Instant and repeatable arc ignition at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.
READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits.
Supplied with:
Earth clamp and cable 3 m long.
LINCGUN PROMIG 300 torch 4 m long
Gas hose 2 m long
Reversible drive roll for steel/stainless wire Ø 1 and 1.2 mm
Power cable 5 m long
| Combinations | Price | |
| €3,659.25 | ||
| €4,633.00 | ||
Save 5%
Supplier stock
Lincoln Electric
Reference: W403676
Lincoln Electric - Powered welding helmet Europure Plus 5500LS
(6 reviews)
€1,296.63
€1,364.87
1 054,17 € tax excl.
or 4 x 324,16 €
Free delivery
2-year warranty
Powered air purifying respirator mask with TH3 P R SL filtration system
The EuropurePLUS™ 5500 LS is an intelligent powered air purifying respirator system with filtration. It features an integrated flip-up lens for grinding, side windows, an extra-large auto-darkening lens and our Light Shade (LS) Technology.
Adjustable airflow from 170 to 210 litres/minute
Battery life: 5 to 9 hours depending on airflow setting
Battery charge time: 1 hour
Particle and aerosol filtration: P3 - Protects against particles related to dust and welding fumes
Visual, audible and vibrating alarms for additional safety
PAPR certification EN 12941 TH3 P RSL
this helmet requires 2 cr2450 batteries for the cell to function.
In addition to the Europure Plus 5500LS powered air purifying respirator mask, the following are included:
5 outer protective screens and 2 inner protective screens
1 side window cover kit
2 Pre-filters and 2 Filters – 2 pieces
1 Lithium battery
2 Spark guards
1 Battery charger
1 Hose with protection 
1 Head cover
1 Shoulder straps
1 Airflow indicator
1 Carrying bag
1 Bandana
1 Sticker sheet
2 CR2450 batteries
Warranty period: fan: 1 year
Auto-darkening cell: 2 years
Supplier stock
Lincoln Electric
Reference: POWERTEC i380C
LINCOLN - Powertec I380C with Promig 300 or 330 W torch | MIG MAG welding machine
€6,078.25
4 941,67 € tax excl.
Free delivery
2-year warranty
The generators in the POWERTEC® i COMPACTS RANGE are designed on the latest Lincoln Electric inverter platform for optimal MIG-MAG and MMA welding performance with excellent energy efficiency. The range includes generators delivering 250A, 320A, 380A and 450A, equipped with either a STANDARD screen (i250 & i320 models) or an ADVANCED screen (i250, i320, i380 & i450 models), to best meet customer needs depending on their welding applications. The COOLARC® 26 cooling unit is available in Plug & Play version for the POWERTEC® i380C & i450C ADVANCED.
The model presented below is the Powertec I380 ADVANCED, with a high duty cycle: 320A@60% - 240A@100%, available in two versions
Air-cooled torch
Water-cooled torch
Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding faults...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' colour screen
USB connectivity: Software updates and diagnostics made easier with built-in monitoring functions.
This unit features
INNOVATIVE INTUITIVE INTERFACE
Easy navigation even when wearing welding gloves.
Intuitive adjustment by selecting the process and the thickness to weld
Display of useful information
Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready for use with the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier with built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rollers: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC START Instant and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during changes in welding conditions.
READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new tolerated limits.
Supplied with for both versions:
Ground clamp and cable length 3 m.
1 Lincgun PROMIG 300 or 330w torch depending on the unit chosen (water or air-cooled torch)
Gas hose length 2 m
Reversible roller for steel/stainless wire Ø 1 and 1.2 mm
Power cable length 5 m
As a supplement for the unit with water-cooled torch
Coolarc 26 cooling unit
Freezcool coolant – 9.6 L container
| Combinations | Price | |
| €6,078.25 | ||
| €4,812.38 | ||
Save 10%
Available for order
Lincoln Electric
Reference: K14098-1
LINCOLN - Inverter multi-process welding machine SPEEDTEC 180 C without torch K1409
(1 review)
€1,224.87
€1,360.97
995,83 € tax excl.
or 4 x 306,22 €
Free delivery
2-year warranty
This Inverter technology machine Lincoln Speedtec 180C allows you to weld using 2 processes: MMA-MIG-MAG
It allows welding with rutile and basic electrodes (stainless steel - cast iron, etc.) of Ø 1.6 to 4 mm (electrode holder not included)
It operates on a 16 A or 25 A - 230 V domestic outlet depending on the amperage setting.
Its adjustment range is 20 to 200 A for MIG-MAG welding and 20 to 160 A for MMA welding.
Easy polarity reversal to allow the use of flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.
It features the following devices:
PFC (power factor corrector) It can be used with a 100 m extension cord without any power loss.
The power supply can be provided from a generator.
HOT START adjustable, which reduces the risk of sticking when the electrode and workpiece are cold, also facilitates arc ignition and penetration.
ARC FORCE adjustable, which maintains constant amperage regardless of arc length.
ANTI-STICKING reduces the risk of the electrode sticking to the workpiece.
Its advantages:
The high duty cycle of this machine guarantees use without premature triggering of the thermal protection system.
This machine is delivered with:
1 power cable 2 m
1 gas hose 2 m
1 ground cable 3 m
1 set of rollers Ø 0.8 and 1 mm for steel welding wire
Available for order
Lincoln Electric
Reference: W403901
LINCOLN - EUROWAVE 3.0 Streetart Welding Helmet
(1 review)
€261.38
212,50 € tax excl.
or 3 x 87,13 €
Free delivery
2-year warranty
Variable shade adjustable from 8 to 13 depending on your eye sensitivity - Adjustment inside the mask.
Optical class: 1/1/1/1
Viewing area 97 x 60 mm
Grinding mode function DIN 3 - adjustment button on the outside of the helmet
Number of sensors: 4
Dark / light switching time: 0.1-1.0 second - fully adjustable
Weight 560 g
Possibility of adaptable magnifying lens
Minimum trigger amperage: less than 2 A in DC and AC/DC
Headband type: 4-axis pivot
Battery type: 2 x CR2050 + solar cell
True colour rendering device
replacement lenses:
internal: KP2931-1
external: KP2898-1
Save 20%
Lincoln Electric
Reference: K14294-1
LINCOLN - Autonomous welding unit OUTBACK 200
€2,783.90
€3,479.88
2 263,34 € tax excl.
or 4 x 695,98 €
Free delivery
2-year warranty
Product highlights:
Welding power of 200 A in direct current
The single-phase 230/110V generator delivers up to 8.2 kW
Honda 11.1 HP petrol engine, durable and reliable
Compatible with Rutile, Basic and Cellulosic electrodes up to 5.0 mm
Robust and designed for outdoor environments (IP23)
Compliant with RoHS, CE and Stage V standards
Supplier stock
Lincoln Electric
Reference: VIKING-3350
LINCOLN Viking Series 3350 Welding Helmet
(7 reviews)
€353.63
287,50 € tax excl.
or 4 x 88,41 €
Free delivery
2-year warranty
The Lincoln Viking 3350 series welding helmets are the premium quality helmets from this manufacturer.
The 4C process gives these helmets the highest protection rating of 1/1/1/1 and a clearer view by minimising the traditional green tint.
A clearer view is a factor in reducing eye fatigue and therefore provides additional comfort for the welder, while also offering increased visibility of the weld pool for higher quality welding.
This welding helmet is available in 3 finishes and comes with a 3-year warranty.
It features 4 sensors, a large 133 x 144 mm screen, an internal shade adjustment from 5 to 13, and a grinding mode.
Supplied with a CR2450 battery and a carrying case.
Possible welding processes / MMA - TIG and pulsed TIG - MIG and pulsed MIG - flux-cored wire as well as gouging and grinding operations.
| Combinations | Price | |
| €333.12 | ||
| €362.85 | ||
| €353.63 | ||
| €337.23 | ||
Supplier stock
Lincoln Electric
Reference: K14286-1
Lincoln Powertec I 320 C STD welder without torch
(2 reviews)
€3,377.37
2 745,83 € tax excl.
or 4 x 844,34 €
Free delivery
2-year warranty
The POWERTEC® Lincoln i are new compact inverter-type generators for MIG-MAG & MMA welding. They are available in two power ratings (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user.
The model presented below is the Powertec 320 A standard display.
Manual adjustment of voltage and wire feed speed
Quick button for selecting the welding process and shielding gas
Quick access to the most commonly used welding parameters (inductance, 2/4 stroke, Run-in, Burn-back)
This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and the thickness to be welded V Display of useful information V Multilingual navigation menu
MORE FUNCTIONS
AUTO START The machine is immediately ready for use with the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier with built-in monitoring functions.
PERFECT PERFORMANCE
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rollers: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instantaneous and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.
READY FOR THE FUTURE
The new European regulations on welding equipment will soon come into force and will require a gradual phase-out of conventional equipment. The new POWERTEC® i family complies with these regulations by offering energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits.
Quick access to the most commonly used welding parameters (inductance, 2/4 stroke, Run-in, Burn-back)
Supplied with
Earth clamp and cable length 3 m.
Gas hose length 2 m
Reversible roller for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m
Supplier stock
Lincoln Electric
Reference: K14284-1
Lincoln Powertec I 250 C STD without torch
€2,818.75
2 291,67 € tax excl.
or 4 x 704,69 €
Free delivery
2-year warranty
The Lincoln POWERTEC® i units are new compact inverter-type welding machines designed for MIG-MAG & MMA welding. They are available in two power outputs (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user.
The model shown below is the Powertec 250A standard display.
Manual adjustment of voltage and wire feed speed
Quick button for selection of welding process and shielding gas
Quick access to the most frequently used welding parameters (inductance, 2/4 stroke, Run-in, Burn-back)
This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and the thickness to be welded V Display of useful information V Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready for use thanks to the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and consistent wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instant and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.
READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits.
Supplied with
Earth clamp and cable length 3 m.
Gas hose length 2 m
Reversible drive roll for steel/stainless wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m
Available for order
Lincoln Electric
Reference: WP403
Lincoln - Filter for EuropurePlus welding helmet
€3.95
3,21 € tax excl.
Fast delivery
2-year warranty
3 References available for the EuropurePlus welding helmet:
WP403676-18 Pre-Filter (pack of 5 pieces)
WP403676-19 Spark arrestor (1 piece)
WP403676-17 P3 Particulate Filter
| Combinations | Price | |
| €9.63 | ||
| €3.95 | ||
| €51.25 | ||
Supplier stock
Lincoln Electric
Reference: K14285-1
Lincoln Powertec I 250 C ADVANCED welding machine without torch
€3,433.75
2 791,67 € tax excl.
or 4 x 858,44 €
Free delivery
2-year warranty
The POWERTEC® Lincoln i are new compact inverter-type power sources designed for MIG-MAG & MMA welding. They are available in two power outputs (250A and 320A) and with two versions of human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large color screen, 25 pre-programmed synergic programs and numerous welding aids for the user.
The model shown below is the Powertec 250A Advanced
Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding defects...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' color screen
USB connectivity: Simplified software updates and diagnostics thanks to built-in monitoring functions.
This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and thickness to weld V Display of useful information V Multilingual navigation menu
MORE FUNCTIONS
AUTO START-UP The machine is immediately ready to use thanks to the best settings already included
USB CONNECTIVITY Simplified software updates and diagnostics thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimized wire feeder position: stable arc, no vibration in the torch
4 drive rollers: smooth and consistent wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instantaneous and repeatable arc starting at will, immediate stabilization of the welding arc.
STABILITY Exceptional arc stabilization ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.
READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require a gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits.
Supplied with
Ground clamp and cable length 3 m.
Gas hose length 2 m
Reversible roller for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m
Supplier stock
Lincoln Electric
Reference: K14287-1
Lincoln Powertec I 320 C ADVANCED without torch
(2 reviews)
€4,094.88
3 329,17 € tax excl.
Free delivery
2-year warranty
The Lincoln POWERTEC® i units are new compact inverter-type welding machines for MIG-MAG & MMA welding. They are available in two power ratings (250A and 320A) and with two versions of the human-machine interface: the STANDARD version with manual parameter adjustment and the ADVANCED version with a large colour screen, 25 pre-programmed synergic programs and numerous welding aids for the user.
The model shown below is the Powertec 320 A Advanced display
Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding defects...)
Multilingual navigation menu
Full support menu: technical data, accessories, instructions, safety
7'' color screen
USB connectivity: Simplified software updates and diagnostics thanks to included monitoring functions.
This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves. V Intuitive adjustment by selecting the process and thickness to weld V Display of useful information V Multilingual navigation menu
MORE FEATURES
AUTO START-UP The machine is immediately ready for use thanks to the best settings already included
USB CONNECTIVITY Simplified software updates and diagnostics thanks to included monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and steady wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC STARTING Instantaneous and repeatable arc starting at will, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instant adjustment of welding parameters during variations in welding conditions.
READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require the gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering an energy efficiency equal to or greater than 85% and a standby consumption below the new permitted limits.
Ground clamp and cable length 3 m.
Gas hose length 2 m
Reversible drive roll for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m
Save 10%
Supplier stock
Lincoln Electric
Reference: K14242-1
LINCOLN - 275S | MMA INVERTEC welding machine
(2 reviews)
€2,511.25
€2,790.28
2 041,67 € tax excl.
or 4 x 627,81 €
Free delivery
2-year warranty
Duty cycle 270A @ 25%
400V ±15%, 3Ph 50/60Hz
Generator compatible
Lightweight: only 14.3 kg
Low standby power consumption below 19W and efficiency>85%
Manual and synergic MMA – Pulsed
Fan on demand (Intelligent F.A.N.)
VRD (Voltage Reduce Device)
Ability to weld cellulosic electrodes
3-year warranty
Save 20%
Available for order
Lincoln Electric
Reference: B18257-1-P
LINCOLN - BESTER 170 ND | MMA inverter welding machine - in carrying case
(7 reviews)
€230.63
€288.29
187,50 € tax excl.
or 3 x 76,88 €
Free delivery
2-year warranty
Adjustment range from 10 to 160 A
High duty cycle
Operates on a standard 16 A domestic socket
Allows the use of Ø 1.6 to 4 mm electrodes
Accepts rutile and basic type electrodes
Technologies: Hot Start, Arc Force
Supplied in a carrying case with:
1x Cable with earth clamp (3 metres) (35/50 mm² connector)
1x Cable with electrode holder (3 metres) (35/50 mm² connector)
1x Power cable 1.5 metres
Supplier stock
Lincoln Electric
Reference: K14288-1
Lincoln Powertec I 380 C ADVANCED welder without torch
€4,197.38
3 412,50 € tax excl.
Free delivery
2-year warranty
The generators of the POWERTEC® i COMPACT RANGE are designed on the latest Lincoln Electric inverter platform, for optimal MIG-MAG and MMA welding performance with excellent energy efficiency. The range includes: generators delivering 250A, 320A, 380A and 450A, equipped with either a STANDARD screen (i250 & i320 models) or an ADVANCED screen (i250, i320, i380 & i450 models), to best meet customer needs depending on their welding applications. The COOLARC® 26 cooling unit is available in Plug & Play version for the POWERTEC® i380C & i450C ADVANCED.
The model shown below is the Powertec I380 ADVANCED, featuring a high duty cycle: 320A@60% - 240A@100%
Intuitive adjustment by selecting the process and material thickness
Synergy curves, limits, memories
Display of useful information (ARCFX, welding defects...)
Multilingual navigation menu
Comprehensive support menu: technical data, accessories, instructions, safety
7'' colour screen
USB connectivity: Software updates and diagnostics made easier thanks to built-in monitoring functions.
This unit features
INNOVATIVE INTUITIVE INTERFACE
Simple navigation even when wearing welding gloves.
Intuitive adjustment by selecting the process and the thickness to weld
Display of useful information
Multilingual navigation menu
MORE FUNCTIONS
AUTO START The machine is immediately ready for use with the best settings already included
USB CONNECTIVITY Software updates and diagnostics made easier thanks to built-in monitoring functions.
PERFECT SUITABILITY
Optimised wire feeder position: stable arc, no vibration in the torch
4 drive rolls: smooth and jerk-free wire feeding
Developed and tested for work in the most demanding conditions (TRUE HD) to guarantee the reliability you need.
PREMIUM ARC PERFORMANCE
ARC START Instant and repeatable arc ignition on demand, immediate stabilisation of the welding arc.
STABILITY Exceptional arc stabilisation ensuring smooth metal transfer and reduced spatter.
ARC DYNAMICS Instantaneous adjustment of welding parameters during variations in welding conditions.
READY FOR THE FUTURE
The new European regulation on welding equipment will soon come into force and will require a gradual phase-out of conventional equipment. The new POWERTEC® i family complies with this regulation by offering energy efficiency equal to or greater than 85% and a standby consumption below the new tolerated limits.
Earth clamp and cable, length 3 m.
Gas hose length 2 m
Reversible roll for steel/stainless steel wire Ø 1 and 1.2 mm
Trolley
Power cable length 5 m
Supplier stock
Lincoln Electric
Reference: B18267-1
LINCOLN - B18267-1 Bester S171 inverter welding machine
€302.37
245,83 € tax excl.
or 4 x 75,59 €
Free delivery
2-year warranty
Excellent value for money
Duty cycle: 95A at 60% / 75A at 100%
Amperage range: 15 to 160A
Lift TIG function
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force
Power supply: 230 Volts 50/60 Hz – 16A –
Open circuit voltage: 84 V
Featherweight: 3.5 kg – 2-year warranty
Supplied with:
1x Cable with ground clamp (3 meters) (35/50 mm² connector)
1x Cable with electrode holder (3 meters) (35/50 mm² connector)
1x Power cable 1.5 meters
Available for order
Lincoln Electric
Reference: B18268-1
LINCOLN - B18268-1 Inverter welder Bester S211
€394.62
320,83 € tax excl.
or 4 x 98,66 €
Free delivery
2-year warranty
Duty cycle: 95A at 60% / 65A at 100%
Amperage range: 20 to 200A
Lift TIG function
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force
Power supply: 230 Volts 50/60 Hz – 16A –
Open circuit voltage: 84 V
Featherweight: 3.5 kg – 2-year warranty
Supplied with:
1x Cable with ground clamp (3 meters) (35/50 mm² connector)
1x Cable with electrode holder (3 meters) (35/50 mm² connector)
1x Power cable 1.5 meters
Supplier stock
Lincoln Electric
Reference: K14168-1
LINCOLN - PULSE SPEEDTEC 320CP welding unit without torch
€4,638.12
3 770,83 € tax excl.
Free delivery
2-year warranty
This Inverter Synergic technology welding unit Lincoln Speedtec 320 CP allows you to weld using 2 processes: MMA-MIG-MAG.
This unit is perfectly suited for maintenance and repair work, metal construction (on-site or in the workshop) and the construction of aluminium structures.
It allows welding with rutile and basic electrodes (stainless steel - cast iron, etc.) from Ø 1.6 to 4 mm (electrode holder not included)
It operates on a 20 A - 400 V/3Ph domestic outlet
4-roller wire feed system
Its adjustment range is 20 to 200 A in MIG-MAG mode and 20 to 160 A in MMA mode
Easy polarity reversal to use flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.
It is equipped with the following devices:
PFC (Power Factor Corrector) It can be used with a 100 m extension cord without any loss of power.
The power supply can be provided by a generator.
HOT START adjustable, which reduces the risk of sticking when the electrode and workpiece are cold, and also facilitates arc striking and penetration.
ARC FORCE adjustable, which maintains constant amperage regardless of arc length.
ANTI-STICKING reduces the risk of electrode sticking to the workpiece.
Key features:
The high duty cycle of this unit guarantees use without premature triggering of the thermal protection system.
This unit is delivered at the time of sale with:
1 x 5 m power cable
1 x 2 m gas hose
1 x 5 m ground cable
1 set of Ø 0.8 and 1 mm rollers for steel welding wire
1 x 300 mm wire adapter
Array