Poste Soudure Multiprocédés GYS

Active filters

  • Synergie: Non
  • Champ de réglage soudure MIG (en Ampère): 30 - 140 A

Filter By

Champ de réglage soudure MIG (en Ampère)

Champ de réglage soudure MIG (en Ampère)

Price

Price

  • €474.00 - €475.00

By choosing a welding machine on Soudure.pro, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.

Compliance with EN 60974-1 guarantees that the equipment is intended for industrial and professional use and, regarding electromagnetic compatibility rules, that it is class A equipment.
Before use, you must check the following points in particular:
- The electrical network used with this type of device must be properly grounded.
- The electrical line to which the welding machine is connected must be controlled by a fuse with an amperage matching the value shown on the rating plate or in the supplier manual.
Depending on the model you are interested in, especially its power in amperes or current type, single-phase or three-phase, you should contact your electricity supplier to make sure your subscription is suitable.
- Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other health effects that are not yet known.
In general, as with any other tool, it is essential to read the user manual supplied with the machine, including the safety instructions, before using this equipment.

Active filters

  • Synergie: Non
  • Champ de réglage soudure MIG (en Ampère): 30 - 140 A
favorite_border favorite
GYS - EASYMIG 150 | Poste à souder Inverter Multi procédés

Supplier stock

Gys

Reference: 032248

GYS - EASYMIG 150 | Poste à souder Inverter Multi procédés

€525.00

437,50 € tax excl.

or 4 x 131,25 €

Free delivery

2-year warranty

Idéal pour les artisans ou particuliers
Soude l'acier, inox et aluminium en occasionnel
Facteur de marche: 140A@15% - 40°C
Combine 3 procédés de soudage en 1 produit :
- MIG/MAG avec gaz (fil plein de Ø 0,6 à 0,8 mm)
- MIG/MAG sans gaz (fil fourré de Ø 0,9 mm)
- MMA (électrode de Ø 1,6 à 2,5 mm) avec fonction Antisticking
Dévidoir 2 galets pour bobine Ø 100 mm (1 kg) ou Ø 200 mm (5 kg)
Torche MAG amovible 150A de 2.20m
Interface et réglage très intuitif
Compatible groupe électrogène 8kva
Alimentation monophasée 230 V - 16 A
Dimensions: 40 x 20x 33 cm - 15kg

Livré avec:
- 1 pince de masse (câble 1,6m / 16 mm2)
- 1 porte électrode (câble 1,6m/ 16 mm2)
- 1 sachet d'accessoires ( Tube contact 0,9mm, Buse gaz, Clé de serrage, Tube gaz 1m avec 2 colliers)

Back to top