Italy
Germany
Netherlands
Denmark
Ireland
Portugal
Spain
Earth clamp 250 Amperes + 16 mm² cable 3 m long (kit-245) or 4 m long (kit-242)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 25 connector
Reference: KIT-245
Earth clamp 250 A + 16 mm² cable - 9 mm connector
276.31 kr
276,31 kr tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
Earth clamp 250 Amperes + 16 mm² cable 3 m long (kit-245) or 4 m long (kit-242)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 25 connector
Customer reviews
Product reviews
-
meets my expectations quality product
-
flexible and solid, good product, I recommend!
-
replacement lenses good product
-
meets expectations - Recommended.
-
No specific comments
-
Everything went well
-
Good price, good advice, perfect delivery even for bulky items. Recommended * * * * *
-
Well, the product is what I wanted.
-
no problem, the hex key for tightening the cable is too weak despite everything
-
Top seller super fast
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
Telwin
Reference: 802582-804109
Multi-purpose special MIG MAG pliers
(51 reviews)
162.02 kr
162,02 kr tax excl.
or 3 x 54,01 kr
Free delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
Available for order
Weldline
Reference: W000335164
Chipping hammer metal handle
(10 reviews)
62.27 kr
62,27 kr tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
Available for order
Lincoln Electric
Reference: WP10419
Teflon liner for MIG torch Lincoln LGS 2 aluminium welding
(3 reviews)
148.05 kr
148,05 kr tax excl.
Free delivery
2-year warranty
Aluminium wire guide liner Ø 0.1 mm, 1.2 mm
2 lengths available for 3 or 4 m torch.
This liner fits 250 A torches used with Lincoln Speedtec 200 and 215 C welding machines
Available for order
Lincoln Electric
Reference: LINCOLN-GALET-POWERTEC-Flux
4 flux-cored wire rollers for Lincoln I-POWERTEC Standard or Advanced welding machine
1,137.16 kr
1 137,16 kr tax excl.
or 4 x 284,29 kr
Free delivery
2-year warranty
Set of 4 Rollers for Lincoln POWERTEC Standard and Advanced Series welder For flux-cored wire (gasless)
Rollers are reversible; You have two possible wire diameters per roller set.
In addition to the 4 rollers, the roller set includes:
- 1 Metal wire guide for EURO connector
- 1 Plastic wire guide set
Available for order
Kemppi
Reference: GAINE-SP
KEMPPI - Wire guide liner for steel or stainless steel for EURO MINARMIG adapter
107.43 kr
107,43 kr tax excl.
Fast delivery
2-year warranty
Wire guide liners for steel or stainless steel wire from Ø 0.6 to 1 mm depending on the chosen reference
These liners are designed to be used with the EURO adapter for MINARMIG 170 OR 200 welding machines (reference W008366)
Available for order
A.T.I
Reference: 16508
Welding brush with crimped steel wire for brushing steel
117.29 kr
117,29 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm
Available for order
Trafimet
Reference: MF00
Swan neck for MIG Ergoplus Trafimet torch
(5 reviews)
115.88 kr
115,88 kr tax excl.
Fast delivery
2-year warranty
Swan neck for Trafimet MIG-MAG torch, Ergoplus
Reference MF0032 is intended for the Ergoplus 15
Reference MF0033 is intended for the Ergoplus 25
Reference MF0034 is intended for the Ergoplus 36 and Ergoplus 36 M8
Available for order
Lincoln Electric
Reference: ED016354
Lincoln Innershield NR-211-MP Wire Ø 0.9 mm
(3 reviews)
1,561.37 kr
1 561,37 kr tax excl.
or 4 x 390,34 kr
Free delivery
2-year warranty
Main Characteristics
- Suitable for outdoor use on site in winds up to 50 km/h
- All-position welding (including downhill) of sheet metal up to 12 mm thickness
- Suitable for thin sheet> 1.2 mm with Ø 0.9 mm
- Excellent choice for welding galvanised steels
Applications
- Metal sheet or thin sheet scrap.
- Galvanised metal scrap
- Robotic/automatic applications
- General fabrication
- Maximum plate thickness: 5/16" for tubes up to 0.045" diameter for 0.045" (1.14 mm)
- Maximum plate thickness: 1/2" (12.7 mm) for tubes from 0.068 to 3/32" diameter.
Welding Positions
All positions
Spool weight: 4.5 kg
Supplier stock
StrongHandTools
Reference: MVDF 44
4 Multi-Position Magnetic Positioners
(14 reviews)
315.91 kr
315,91 kr tax excl.
or 4 x 78,98 kr
Free delivery
2-year warranty
Articulated positioner for holding sheet metal, round, flat or square workpieces during welding operations
Each positioner has 4 magnets
Pack of 4 positioners
Available for order
GEKA
Reference: FIL-200.CORTEN
CORTEN steel wire coil diameter Ø 200 mm weight 5 kg
(26 reviews)
540.20 kr
540,20 kr tax excl.
or 4 x 135,05 kr
Free delivery
2-year warranty
CORTEN steel wire coil type 80 SG Ø 200 mm Weight 5 Kg
Standard AW A5.28 - ER 80S-G
Standard ISO 16834-A - G ZMn3Ni1 Cu
Wire section available: 0.8, 1 and 1.2 mm
The use of this welding wire requires the supply of gas (Argon + CO² mixture) during use.
DECA
Reference: 010241
Steel wire guide liner for DECA MIG torch
(3 reviews)
71.80 kr
71,80 kr tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner. Wire Ø 0.6/1 mm for steel wire - stainless steel wire and flux-cored wire (gasless)
Length 3 m
This liner fits DECA welding machines
MIGA 215
D-MIG 230 AC - Starflux 130 AC
D-MIG 235 - 265 - 350 - 380 with fixed torch
Available for order
Lincoln Electric
Reference: LINCOLN-GALET
1 Drive roll for Lincoln Speedtec and Powertec welder
(10 reviews)
324.90 kr
324,90 kr tax excl.
or 4 x 81,23 kr
Free delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
Save 10%
Supplier stock
Trafimet
Reference: lot 010341
Set chipping hammer + 3-row steel welding brush
(32 reviews)
100.78 kr
111.98 kr
100,78 kr tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
Available for order
Gys
Reference: 041332
Special MIG MAG multi-purpose pliers Original Fix
(40 reviews)
333.03 kr
333,03 kr tax excl.
or 4 x 83,26 kr
Free delivery
2-year warranty
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
Available for order
Trafimet
Reference: ERGOPLUS-36P
MIG-MAG Torch 360 A Trafimet Ergoplus 36 Premium
(2 reviews)
1,313.37 kr
1 313,37 kr tax excl.
or 4 x 328,34 kr
Free delivery
2-year warranty
New Trafimet MIG-MAG Torch model Ergoplus 36 Premium
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Air-cooled.
Duty cycle 300 A @ 60%
For use with welding wire Ø 0.6 to 1.6 mm
Accepts M6 threaded contact tips
originally equipped with a 1/1.2 liner and a 1.2 mm contact tip
Available for order
Lincoln Electric
Reference: W000010790
5 gas nozzles diameter 15 mm Lincoln for torch LGS and LGP
(8 reviews)
231.01 kr
231,01 kr tax excl.
or 3 x 77,00 kr
Free delivery
2-year warranty
5 gas nozzles designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E
Earth clamp 250 Amperes + 16 mm² cable 3 m long (kit-245) or 4 m long (kit-242)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
TX 25 connector