Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
STEEL filler metal rods type SG 2 for TIG welding
Standard AWS A 5.18 ER 70S-6
Diameter 1.2 - 1.6 - 2 and 2.4 mm.
Rod length 100 cm.
950 g pack
Reference: TIGACD-1.2
TIG filler metal rods - STEEL SG2 950 g pack
€11.83
9,62 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
STEEL filler metal rods type SG 2 for TIG welding
Standard AWS A 5.18 ER 70S-6
Diameter 1.2 - 1.6 - 2 and 2.4 mm.
Rod length 100 cm.
950 g pack
Accessories for TIG filler metal rods - STEEL SG2 950 g pack
€42.44
TIG filler metal rods - STEEL SG2 5 kg sleeve
Reference: TIGAC/5kg
€25.12
TIG filler metal rods - CORTEN steel case 950 g
Reference: TIGCORTEN
€85.85
TIG filler rods - CORTEN steel 5 kg case
Reference: CORTEN/5kgCustomer reviews
Product reviews
-
Ras
-
not yet used
-
OK flush
-
Nickel meets my expectations
-
Wands…
-
Impeccable
-
Satisfied
-
Perfect nothing to say at the top
-
You're good
-
Impeccable! Thank you
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Jelt
Reference: 5501
(3 reviews)
€8.11
6,59 € tax excl.
Fast delivery
2-year warranty
The DETECT FUITES is a water-based product containing an antifreeze additive, anti-corrosion additives and surfactants that give it very high efficiency in immediately locating gas leaks on all circuits. It can be used with all types of gas (compressed air, hydrocarbons, CO2, nitrogen… except pressurised oxygen)
The DETECT FUITES works by forming air bubbles around the gas leak. The DETECT FUITES is frost-resistant and can be used down to -20°C.
The DETECT FUITES is over 80% biodegradable.
Safe to use on pneumatic circuits, fittings, valves, taps, safety valves or cylinders.
MAIN FEATURES
• Immediately visible detection
• Instant bubble or foam formation
• Neutral towards substrates
• Non-flammable
• Over 99% biodegradable
• Leaves no residue
• Contains anti-corrosion agents
• Formulated with an antifreeze agent -20°C
• Do not use on pressurised oxygen — use DETECTO FUITES Ref.: 005511
• Aerosol usable in all positions
FIELDS OF APPLICATION
• Suitable for detecting leaks of:
• Compressed air, CO², Nitrogen
• Butane, Propane
• Gas used in air conditioning systems
• Refrigerant gas
• Leak detection on: • Pipework, • Valves, • Fittings, • Gate valves, • Safety valves, • Gas cylinders
Net capacity 400 ml - 650 ml aerosol can.
Made in France.
In stock
Telwin
Reference: BRUSH IT
(4 reviews)
€27.58
22,42 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for small weld beads
1 L or 5 L container.
Applied with a suitable brush.
Supplier stock
Weldline
Reference: W000306443
€80.97
65,83 € tax excl.
Fast delivery
2-year warranty
Maintenance kit for PROTIG 30 and 30W torch
This torch is fitted on welding machines of the Lincoln and SAFPRO brands
This kit contains:
1 short cap - 1 medium cap and 1 long cap
1 collet body Ø 1 - 1.6 - 2 - 2.4 and 3.2 mm
1 Standard nozzle 6.4 - 8 - 9.6 and 12.8 mm
In stock
Gys
Reference: 087583
€117.87
95,83 € tax excl.
Fast delivery
2-year warranty
TIG 17 V Torch – Air – 4 m – Connector 10/25 – GYS087583
Length 4 m. Quarter-turn connector 10/25.
Duty cycle at 60%: 140 A DC and 125 A AC.
Usable tungsten electrodes: up to 2.4 mm.
This GYS TIG torch comes with an accessories kit including:
1 nozzle (N7)
1 collet body (Ø2.4)
1 collet (Ø2.4)
1 back cap (long)
1 WR2 AC/DC tungsten electrode (Ø2.4)
Supplier stock
Soudexpert
Reference: TIG316L161
(2 reviews)
€29.62
24,08 € tax excl.
Fast delivery
2-year warranty
TIG filler rod STAINLESS STEEL 316L
Diameter: 1.6 mm
Rod length: 1 metre
1 kg sleeve
1 kg equals +/- 63 rods
Requires the use of welding gas (pure Argon)
Ideal for DC welding of austenitic stainless steels type 316L / 316 / 304 / 304L.
Standards: AWS A5.9- ER316L- EN 12072 - W19123L
Applications:
- Suitable for corrosive, acid, chlorine environments
- Food grade
- Petrochemistry
- Handrails
In stock
Soudexpert
Reference: TIGALMG51605
(2 reviews)
€23.37
19,00 € tax excl.
Fast delivery
2-year warranty
TIG ALU AlMg5 filler rods - ER5356
Diameter: 1.6 mm
Rod length: 1 meter
Pack of 0.5 kg
0.5 kg equals +/- 96 rods
Requires the use of welding gas (pure Argon)
Ideal for welding Aluminum alloys with alternating current (AC)
Standards: AWS A5.10- N.AlMg5- ER5356 - NF A 81.331
Applications:
- Naval industry
- Railway construction
- Aeronautical construction
- Automotive industry
- Furniture manufacturing
- Tipper bodies and trailers
- Various aluminum repairs
In stock
Gys
Reference: 041233
(14 reviews)
€51.05
41,50 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 aluminium
3 contact tip holders 250 A
5 nozzle springs
3 gas nozzles
Supplier stock
Telwin
Reference: 802790
(1 review)
€814.88
662,50 € tax excl.
or 4 x 203,72 €
Free delivery
2-year warranty
This cooling unit is suitable for TELWIN TIG welding machines whose references are listed below
Technology Tig 222
Superior Tig 252 and 311
Delivered with clamping kit reference 981648
In stock
Trafimet
Reference: GM05
(7 reviews)
€6.10
4,96 € tax excl.
Fast delivery
2-year warranty
Steel or stainless steel wire guide liner:
3 liner diameters available:
Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm for wire Ø 0.6 to 0.9 mm.
Inner diameter 2 mm and outer Ø of the liner 4.6 mm for wire Ø 1 and 1.2 mm.
Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm for wire Ø 1.2 and 1.6 mm.
Length 3 m
In stock
HELVI
Reference: 33805063
(3 reviews)
€15.33
12,46 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag welder for steel or stainless steel welding wire Ø 1 and 1.2 mm.
Also compatible with the following Helvi welder models:
Multimaker 192
Panther 152 / 172
Easymig 177 / 188 / 208N / 238
Monomig 166
Fox 180 / 181
Monomig 186 / 196
Diameter: 30.23 mm
Thickness 15.40 mm
Bore 9 mm
In stock
Sacit
Reference: KIT-243/244
(9 reviews)
€40.37
32,82 € tax excl.
Fast delivery
2-year warranty
Earth clamp 250 Amperes + 25 mm² cable length 3 m (KIT-243) or length 4 m (KIT 244)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
Connector TX 25
Opening 45 mm
In stock
Telwin
Reference: 742729
(1 review)
€49.51
40,25 € tax excl.
Fast delivery
2-year warranty
2 Double-groove rollers for Mig-Mag TELWIN welder for flux-cored wire, available for wire diameter: 1 / 1.2 mm
Compatible with Telwin welders:
TECHNOMIG 223 TREO - 240-260
ELECTROMIG 281/2 Turbo - 300 SYN. - 230- 330 WAVE - 400, 450 Synergic -550 Synergic
MASTERMIG 300 -270/2 - 400 - 500
ELECTROMIG 300 Synergic - 330 Wave - 430 WAVE - 450 - 550 -330-
SUPERMIG 380
SUPERIOR 400 MIG PACK - 630 MIG PACK -
INVERPULSE 60.30, 60.40
Supplier stock
Lincoln Electric
Reference: K14037-1
€613.98
499,17 € tax excl.
or 4 x 153,50 €
Free delivery
2-year warranty
Water cooling system for use with conventional and CV Powertec generators.
Equipped with an input cable with plug for 230V 50/60Hz power supply.
The quick connect/disconnect function makes changing MIG torches achievable in just a few seconds.
Coolant level inspection window.
Specifications
- Equipped with an input cable with a 16A Schuko plug for 230V 50/60Hz power supply.
- The quick connect/disconnect function makes changing MIG torches achievable in just a few seconds.
- Tank capacity of 8.5 liters
- Coolant level inspection window.
- Vertical position
- Lincoln Electric FREEZCOOL recommended coolant W000010167.
Dimensions: 748 X 238 X 148 mm
Weight: 17 kg
Capacity: 8.5 L
Warranty: 3 years
For use with Powertec® 365S, 425S, 505S and CV generators.
can operate independently, by plugging into a 16A power outlet.
In stock
Trafimet
Reference: MC0017
(3 reviews)
€8.97
7,29 € tax excl.
Fast delivery
2-year warranty
This nozzle fits onto the end of your MIG torch
Its role is to direct the gas flow towards the weld and the molten wire.
Its small diameter allows work in tight spaces where room is limited.
In stock
SILICONI
Reference: ZINCOSIL 400
€8.97
7,29 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.
500 ml aerosol
PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.
Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free
BINZEL
Reference: SR 26 L
(1 review)
€183.98
149,58 € tax excl.
or 3 x 61,33 €
Free delivery
2-year warranty
Binzel brand TIG SR26 L flexible head torch.
Length 4 or 8 M.
Air cooling.
Duty cycle:
DC = 240 A @60% - AC = 200 @ 60%
Usable tungsten electrode: diameter 0.5 to 4 mm.
Amphenol 7-pin connector Ø 35/50 mm
Light and easy to use, these torches offer ideal manoeuvrability for smooth welding. The moulded handle with GRIP provides optimal grip for achieving the perfect weld. The SR 26 torch is the most powerful in the air-cooled range.
Compatible with the following GYS TIG welding machines:
220DC FV - 300 DC - 220 AC/DC
STEEL filler metal rods type SG 2 for TIG welding
Standard AWS A 5.18 ER 70S-6
Diameter 1.2 - 1.6 - 2 and 2.4 mm.
Rod length 100 cm.
950 g pack