Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Swan neck for MIG-MAG torch Trafimet, Ergoplus
Reference MF1515 is intended for the Ergoplus Premium 15 model
Reference MF0017 is intended for the Ergoplus Premium 25 model
Reference MF0019 is intended for the Ergoplus Premium 36 model
Reference: MF01515
TRAFIMET - Swan neck for Mig Ergoplus Premium torch
€11.28
9,17 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Swan neck for MIG-MAG torch Trafimet, Ergoplus
Reference MF1515 is intended for the Ergoplus Premium 15 model
Reference MF0017 is intended for the Ergoplus Premium 25 model
Reference MF0019 is intended for the Ergoplus Premium 36 model
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
DECA
Reference: 010673
(35 reviews)
€4.61
3,75 € tax excl.
Fast delivery
2-year warranty
Drive roller for DECA MIG-MAG welder compatible with the following DECA welder references:
Decastar 130 AC and 135 EVO
Startwin 135 EVO - 165/1 EVO and 180 E.
D-Mig 230 AC - D-Mig 235 and 265
Decastar 150 E and 180 E
D-MIG 350 - 380 - 390
D-MIG 420S
Only the flux-cored wire roller can be fitted on the DECA Starflux 130 - Decastar 130 AC and D-Mig 230AC welders.
These welders operate exclusively with flux-cored wire (gasless).
In stock
Telwin
Reference: 802067
(66 reviews)
€13.28
10,80 € tax excl.
Fast delivery
2-year warranty
Gas hose length 2 m + 2 hose clamps + 1 diameter reducer fitting.
This gas hose connects the regulator for refillable cylinders to your MIG or TIG welding machine.
The fitting (shown in the photo) allows the connection between this gas hose for refillable cylinders and a Ø 4 mm hose for disposable cylinders.
In stock
Sacit
Reference: KIT-243/244
(9 reviews)
€40.37
32,82 € tax excl.
Fast delivery
2-year warranty
Earth clamp 250 Amperes + 25 mm² cable length 3 m (KIT-243) or length 4 m (KIT 244)
Earth clamp opening 45 mm
Duty cycle 200 A @60% - 250 A @ 35%
Connector TX 25
Opening 45 mm
In stock
Kemppi
Reference: 9580173
(1 review)
€7.69
6,25 € tax excl.
Fast delivery
2-year warranty
1 gas diffuser compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.
In stock
Le Lorrain
Reference: 150375
(11 reviews)
€19.99
16,25 € tax excl.
Fast delivery
2-year warranty
Quick coupling for connecting 2 hoses
Stepped olive allowing connection of hoses with Ø 4 to 6 mm inner diameter
In stock
Trafimet
Reference: ERGOPLUS-36P
(2 reviews)
€149.16
121,27 € tax excl.
Free delivery
2-year warranty
New Trafimet MIG-MAG Torch model Ergoplus 36 Premium
The ERGOPLUS MIG torch series has been renewed, bringing significant improvements to welding performance:
- new ergonomic design with natural-grip handle,
- new flexible plastic spring support,
- removable torch handle (included in all standard torch sets),
- sealed micro-switch trigger (IP67 protection rating),
- EPDM connector, more flexible and more durable,
- reduced swan neck temperature,
- reduced consumable usage rate.
Consumables are compatible with most European brands.
Length 3 m and 4 m
Euro connection
Air-cooled.
Duty cycle 300 A @ 60%
For use with welding wire Ø 0.6 to 1.6 mm
Accepts M6 threaded contact tips
originally equipped with a 1/1.2 liner and a 1.2 mm contact tip
Supplier stock
Kemppi
Reference: 958010101
(2 reviews)
€19.99
16,25 € tax excl.
Fast delivery
2-year warranty
2 gas nozzles diameter 14 mm - Length 60.5 mm.
Compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO machines sold on our website.
In stock
Trafimet
Reference: GM05
(7 reviews)
€6.10
4,96 € tax excl.
Fast delivery
2-year warranty
Steel or stainless steel wire guide liner:
3 liner diameters available:
Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm for wire Ø 0.6 to 0.9 mm.
Inner diameter 2 mm and outer Ø of the liner 4.6 mm for wire Ø 1 and 1.2 mm.
Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm for wire Ø 1.2 and 1.6 mm.
Length 3 m
Lincoln Electric
Reference: S33444
(2 reviews)
€11.48
9,33 € tax excl.
Fast delivery
2-year warranty
These drive rolls are designed for Lincoln welder models in the BESTER 190C -Multi and 215MP range
4 drive rolls available depending on the Ø and type of wire to be welded:
For solid steel or stainless steel wire Ø 0.6 / 0.8 mm ( Lincoln reference S33444-20 )
For solid steel or stainless steel wire Ø 0.8 / 1 mm ( Lincoln reference S33444-21 )
For solid aluminium wire Ø 0.8/ 1 mm ( Lincoln reference S33444-22 )
For flux-cored wire Ø 0.9 / 1.2 mm ( Lincoln reference S33444-23 )
The drive roll is reversible; with one drive roll you have two possible wire diameters.
In stock
Gys
Reference: GYS+GAL1D-FLUX
(7 reviews)
€17.93
14,58 € tax excl.
Fast delivery
2-year warranty
Reversible roller for:
Solid wire Ø0.8 / flux-cored wire 0.9
Flux-cored wire Ø 0.6 / 0.9 mm
Suitable for GYS machines:
Easymig 110 - 130 and 140
Smartmig 110
suitable for DECA machines:
Miga 215 - Miga 218 and Miga 220.
suitable for SCHUMACHER machines:
M 120 NG
D 144WG
In stock
Lincoln Electric
Reference: LINCOLN-GALET
(10 reviews)
€35.88
29,17 € tax excl.
Fast delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
In stock
Gys
Reference: GYS-GAL2-ALUMINIUM
(7 reviews)
€33.11
26,92 € tax excl.
Fast delivery
2-year warranty
2 double V-groove 35° drive rolls for GYS welder for solid aluminum wire, available for wire diameters:
0.8/ 1 mm
1 / 1.2 mm
GYS welder compatibilities:
• MONOGYS 200-4CS and 250-4CS
• TRIMIG 200-4S, 250-4S and 300-4S
• PROMIG 350-4S and 350-4S DUO DV
• TF-4R
• MULTIPEARL 200.4 XL and 201.4
• CARMIG
• M1, M3, T1 and T3 GYS
• W5S-4L
In stock
Trafimet
Reference: MD0009
(31 reviews)
€9.15
7,44 € tax excl.
Fast delivery
2-year warranty
Pack of 10 Trafimet contact tips for welding with steel or aluminium wire
3 diameters available: 0.8 - 1 and 1.2 mm
M6 thread. Length 28 mm
For Mig-Mag torch 250A @60%
Sacit
Reference: F11950
(1 review)
€6.10
4,96 € tax excl.
Fast delivery
2-year warranty
This special cleaning felt removes all small impurities and oils before the wire enters the liner of your torch.
A clean wire ensures better arc stability and prevents inclusions in the weld pool.
It is placed between the spool and the wire feeder.
In stock
Gys
Reference: 041332
(40 reviews)
€37.82
30,75 € tax excl.
Fast delivery
2-year warranty
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
In stock
Gys
Reference: GYS-GAL1A-FLUX
(13 reviews)
€23.53
19,13 € tax excl.
Fast delivery
2-year warranty
Reversible drive roll for GYS MIG-MAG welder for flux-cored wire, available in the following diameters:
0.8 mm solid wire / 0.9 mm flux-cored wire
0.9 / 1.2 mm flux-cored wire
0.6 / 0.9 mm flux-cored wire
Compatible with GYS welding machines:
Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Easymig 150 - 160 - 160XL
Multipearl 200-2
Multiweld
Monogys 200-2CS
Swan neck for MIG-MAG torch Trafimet, Ergoplus
Reference MF1515 is intended for the Ergoplus Premium 15 model
Reference MF0017 is intended for the Ergoplus Premium 25 model
Reference MF0019 is intended for the Ergoplus Premium 36 model