Italy
Germany
Netherlands
Denmark
Portugal
Norway
Spain
Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire
3 diameters available: 0.8 - 1 and 1.2 mm
M6 thread. Length 28 mm
For MIG-MAG torch 250A @60%
Reference: MD0009-08
10 contact tips for Aluminium wire M6 thread - length 28 mm
€12.20
9,92 € tax excl.
Available for order
Shipping within 24h
Delivery in 24-48h
Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire
3 diameters available: 0.8 - 1 and 1.2 mm
M6 thread. Length 28 mm
For MIG-MAG torch 250A @60%
Accessories for 10 contact tips for Aluminium wire M6 thread - length 28 mm
Customer reviews
Product reviews
-
Compliant thank you
-
Perfect
-
perfect!
-
Ras
-
flush
-
Product conforms to the order.??
-
nothing to complain about
-
in use
-
conform to the order and well packaged produced tested and of good quality a local site with good services
-
Object corresponding to my expectations.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Available for order
ESAB
Reference: 036755
ESAB | 1 roller for stainless steel or steel wire
(2 reviews)
€36.36
29,56 € tax excl.
Fast delivery
2-year warranty
We offer 3 wire feed rollers for steel or stainless steel wire, compatible with the ESAB welder models listed below.
ROGUE EM180
ROGUE EMP 210PRO
REBEL EMP205ic AC/DC
REBEL EMP 215c
DECA
Reference: 010241
Steel wire guide liner for DECA MIG torch
(3 reviews)
€8.15
6,63 € tax excl.
Fast delivery
2-year warranty
Aluminium wire guide liner. Wire Ø 0.6/1 mm for steel wire - stainless steel wire and flux-cored wire (gasless)
Length 3 m
This liner fits DECA welding machines
MIGA 215
D-MIG 230 AC - Starflux 130 AC
D-MIG 235 - 265 - 350 - 380 with fixed torch
Available for order
Trafimet
Reference: GM07
Teflon Liner for aluminium wire
(8 reviews)
€30.17
24,53 € tax excl.
Fast delivery
2-year warranty
Trafimet Teflon wire liner with copper terminal for aluminium wire
2 lengths available: 3 metres and 4 metres
2 liner diameters available:
For aluminium wire Ø 0.6 to 0.9 mm reference GM0710 (blue liner) length 3 metres
For aluminium wire Ø 1 and 1.2 mm reference GM0715 length 3 metres (red liner) and GM0716 length 4 metres
Available for order
GEKA
Reference: FIL-316-INOX
316 LSi stainless steel wire spool Ø 300 mm
€235.75
191,67 € tax excl.
or 3 x 78,58 €
Free delivery
2-year warranty
316 LSi stainless steel wire spool Ø available in wire diameters of 0.8, 1 and 1.2 mm, spool Ø 300 mm.
Spool weight: from 12.5 to 15 kg depending on the wire diameter.
Wire Ø 0.8 mm = 12.5 kg spool.
Wire Ø 1 and 1.2 mm = 15 kg spool.
The use of this welding wire requires a gas supply during use (Argon + CO² mixture).
This wire enables welding of stainless steel in the food industry, marine or boilermaking sectors.
This wire meets the AWS A5.9ER316LSi standard
ISO standard 14343-A G 19 9 L Si
Available for order
A.T.I
Reference: 16508
Welding brush with crimped steel wire for brushing steel
€13.32
10,83 € tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm
Available for order
Gys
Reference: 072343
GYS - gasless welding kit for 250 A torch and type B roller
€71.70
58,29 € tax excl.
Fast delivery
2-year warranty
This kit is compatible with GYS MULTIPEARL 210-4 and MULTIPEARL 214-4 welders
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 2 type B rollers with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
Available for order
Sacit
Reference: KIT-251/259
250 A ground clamp + 25 mm² cable - 13 mm connector
(3 reviews)
€43.76
35,58 € tax excl.
Fast delivery
2-year warranty
NEVADA 3 ground clamp with 25 mm² cable, length 3m (KIT-251) or 4m (KIT-259)
Duty cycle 200 A @60% - 250A @ 35%
Dinse TX 50 connector
H01N2-D-HAR rubber electrical wiring
Electrogalvanized steel sheet clamp with brass contacts bridged by a copper braid. Cable secured with a copper strip and steel cable clamp
Maximum opening 45 mm.
Available for order
DECA
Reference: DECA-GAL-JOB220-F
Flux-cored wire feed roller for DECA JOB 220 and MIGA 225XL welder
€18.30
14,88 € tax excl.
Fast delivery
2-year warranty
The rollers listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for gasless welding wire
Ø 0.8 / 0.9 mm
Ø 0.9 / 1.2 mm
Available for order
Telwin
Reference: 742402
TELWIN TW 160 replacement MIG-MAG torch
(1 review)
€101.48
82,50 € tax excl.
Fast delivery
2-year warranty
Telwin TW 160 replacement MIG-MAG torch, length 2 m, for the welding machine references listed below
BIMAX 132 - 140 - BIMAX 152 - BIMAX 4.165 Turbo - BIMAX 162 Turbo
TECHNOMIG 150 DUAL SYNERGIC
MAXIMA 160
Available for order
HELVI
Reference: 33805101
Drive roller for MIG welding wire Ø 0.8-1 mm Helvi Fox 185 Flex welder
€9.18
7,46 € tax excl.
Fast delivery
2-year warranty
Drive roller for Helvi Mig-Mag Fox 185 Flex Line welder for steel and stainless steel welding wire Ø 0.8 and 0.1 mm.
Also compatible with the following Helvi welder models:
Monomig 216 / 246 / 286 / 296
maximig 278 / 298
Unimig 298
Fox 185 Flex-Line
Tp 195
Available for order
DECA
Reference: DECA-GAL-JOB220-AL
Aluminum Wire Drive Roller for DECA JOB 220 and Miga 225 XL
€14.15
11,50 € tax excl.
Fast delivery
2-year warranty
The drive rollers listed below are compatible with the following DECA machines:
JOB 220 LAB
MIGA 225 XL
for aluminum welding wire of diameter
0.8 / 1 mm
1 / 1.2 mm
Available for order
GEKA
Reference: 010830
GEKA |UHSS solid wire Ø 0.8 mm for bodywork welding weight 5 kg
(5 reviews)
€80.97
65,83 € tax excl.
Fast delivery
2-year warranty
UHSS* steel wire.
Wire spool Ø 200 mm. Weight 5 KG - Wire Ø: 0.8 mm
UHSS (Ultra High Strength Steel) wire. UHSS steel is particularly used in bodywork. This material makes it possible to reduce thickness and weight while preserving extreme robustness and collision resistance of components.
Classification of this wire: AWS/ASME SFA-5.28: ER 120 S-G
Standard ISO 16834 W Mn4Ni2.5CrMo
Pure Argon shielding gas
*Ultra High Strength
Available for order
Oxyturbo
Reference: 260090
Flow meter for MIG-MAG semi-automatic welding torch
(22 reviews)
€20.39
16,58 € tax excl.
Fast delivery
2-year warranty
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.
Available for order
Sacit
Reference: CAV000081
2-row brush + welding hammer SACIT
(5 reviews)
€4.98
4,05 € tax excl.
Fast delivery
2-year warranty
Reversible hammer-brush, combining a hammer and a brush for chipping and brushing slag from the weld bead.
Practical 2-in-1 tool for post-weld cleaning.
Carefully sized handle to keep the user away from the hot zone.
Dimensions:
Total length (brush + handle): 290 mm (brush + handle length)
Handle length: 145 mm
Wire length: 25 mm
Available for order
Soudure pro
Reference: 010892
Stainless steel wire 308 L diameter 0.8 mm spool Ø 100 mm weight 700 g
(24 reviews)
€27.16
22,08 € tax excl.
Fast delivery
2-year warranty
Spool of stainless steel wire 308 L Ø 0.8 mm. Weight 700 g
The use of this welding wire requires the supply of a shielding gas (Argon +CO² or Argon + O²).
This wire allows welding of STAINLESS STEELS
The spool diameter is Ø 100 mm
Supplied in protective plastic film + cardboard box.
Available for order
Le Lorrain
Reference: 150381
Le Lorrain |female coupler/ 12/100 ISOCOUPLE
€29.73
24,17 € tax excl.
Fast delivery
2-year warranty
Female neutral gas nozzle
Compatible with quick isocouple connectors 150376
This nozzle fits onto the outlet of your fixed-position regulator and allows you to couple your gas hose fitted with connector 150376
Pack of 10 Trafimet contact tips for welding with steel or stainless steel wire
3 diameters available: 0.8 - 1 and 1.2 mm
M6 thread. Length 28 mm
For MIG-MAG torch 250A @60%